The BSpec states that the aligment for the non-msrt clear rectangle must
be doubled; the BSpec does not restricit the workaround to specific
hardware.
Commit 9a1a67b applied the workaround to Haswell GT3. Commit 8b659ce
expanded the workaround to all Haswell variants. This commit expands it
to all hardware.
No Piglit regressions on Ivybridge 0x0166. No fixes either.
I know no Ivybridge nor Baytrail bug related to this workaround.
However, the BSpec says the extra alignment is required, so let's do it.
v2: Apply to all hardware, not just gen7.
CC: "9.2, 10.0" <mesa-stable@lists.freedesktop.org>
CC: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 998018d7be)
Pre-patch, the workaround was applied to only HSW GT3. However, the
workaround also fixes render corruption on the HSW GT1 Chromebook,
codenamed Falco.
Also, update the BSpec quote that discusses the workaround to reflect
the latest BSpec.
The BSpec states that the workaround is required for Ivybridge and
Baytrail as well as Haswell. But, we apply the workaround to only
Haswell because (a) we suspect that is the only hardware where it is
actually required and (b) we haven't yet validated the workaround for
the other hardware.
CC: "9.2, 10.0" <mesa-stable@lists.freedesktop.org>
CC: Anuj Phogat <anuj.phogat@gmail.com>
OTC-Tracker: CHRMOS-812
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 8b659cef3a)
In commit 065da16 (glsl: Convert lower_clip_distance_visitor to be an
ir_rvalue_visitor), we failed to notice that since
lower_clip_distance_visitor overrides visit_leave(ir_assignment *),
ir_rvalue_visitor::visit_leave(ir_assignment *) wasn't getting called.
As a result, clip distance dereferences appearing directly on the
right hand side of an assignment (not in a subexpression) weren't
getting properly lowered. This caused an ir_dereference_variable node
to be left in the IR that referred to the old gl_ClipDistance
variable. However, since the lowering pass replaces gl_ClipDistance
with gl_ClipDistanceMESA, this turned into a dangling pointer when the
IR got reparented.
Prior to the introduction of geometry shaders, this bug was unlikely
to arise, because (a) reading from gl_ClipDistance[i] in the fragment
shader was rare, and (b) when it happened, it was likely that it would
either appear in a subexpression, or be hoisted into a subexpression
by tree grafting.
However, in a geometry shader, we're likely to see a statement like
this, which would trigger the bug:
gl_ClipDistance[i] = gl_in[j].gl_ClipDistance[i];
This patch causes
lower_clip_distance_visitor::visit_leave(ir_assignment *) to call the
base class visitor, so that the right hand side of the assignment is
properly lowered.
Fixes piglit test:
- spec/glsl-1.50/execution/geometry/clip-distance-itemized-copy
Cc: Ian Romanick <idr@freedesktop.org>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9dfcb05fa6)
Earlier comments suggest this was removed from GL core spec but it is
still there. Enabling makes 'texture_lod_bias_getter' Khronos
conformance tests pass, also removes some errors from Metro Last Light
game which is using this API.
v2: leave NOTE comment (Ian)
Cc: "9.0 9.1 9.2 10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 7e61b44dcd)
We need to check the drawbuffer's orientation before inverting Y
coordinates. Fixes piglit feedback tests when running with the
-fbo option.
Cc: "9.2" "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 15d8e05e1e)
From the Sandy Bridge PRM, Vol 1 Part 1 7.18.3.4 (Alignment Unit
Size):
j [vertical alignment] = 4 for any render target surface is
multisampled (4x)
From the Ivy Bridge PRM, Vol 4 Part 1 2.12.2.1 (SURFACE_STATE for most
messages), under the "Surface Vertical Alignment" heading:
This field is intended to be set to VALIGN_4 if the surface was
rendered as a depth buffer, for a multisampled (4x) render target,
or for a multisampled (8x) render target, since these surfaces
support only alignment of 4.
Back in 2012 when we added multisampling support to the i965 driver,
we forgot to update the logic for computing the vertical alignment, so
we were often using a vertical alignment of 2 for multisampled
buffers, leading to subtle rendering errors.
Note that the specs also require a vertical alignment of 4 for all
Y-tiled render target surfaces; I plan to address that in a separate
patch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53077
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b4c3b833ec)
We need to set the flag on all the .xyzw components that are written by
the instruction, not just on .x. Otherwise a later use of rN.y (for
example) will not trigger the appropriate sync bit to be set.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Seems like most/all instructions have some restrictions about const src
registers. In seems like the 2 src (cat2) instructions can take at most
one const, and the 3 src (cat3) instructions can take at most one const
in the first 2 arguments. And so on. Handle this properly now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The cmps.f.* instruction doesn't actually seem to give a float 1.0 or
0.0 output. It either needs a cov.u16f16 or add.s + sel.f16. This
makes SGT/SLT/etc more similar to CMP, so handle them in trans_cmp().
This fixes a bunch of piglit tests.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It seems there are a number of cases where instructions have limitations
about taking reading src's from const register file, so make
get_unconst() a bit easier to use.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We probably should get rid of assert() entirely, but at this stage it is
more useful for things to crash where we can catch it in a debugger.
With compile_error() we have a single place to set an error flag (to
bail out and return an error on the next instruction) so that will be a
small change later when enough of the compiler bugs are sorted.
But re-arrange/cleanup the error/assert stuff so we at least get a dump
of the TGSI that triggered it. So we see some useful output in piglit
logs.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Don't crash when no color buffer bound. Something caught when starting
to run piglit, fixes a hanful of piglit tests.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Category 4 instructions (rsq, rcp, sqrt, etc) seem to be unable to take
a const register as src. In these cases we need to move the src to a
temporary gpr first.
This is the second case of such a restriction, where the instruction
encoding appears to support a const src, but in fact the hw appears to
ignore that bit. So split things out into a helper that can be re-used
for any instructions which have this limitation.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Our current (rather naive) register assignment is based on mapping
different register files (INPUT, OUTPUT, TEMP, CONST, etc) based on the
max register index of the preceding file. But in some cases, the lowest
used register in a file might not be zero. In which case
file_count[file] != file_max[file] + 1.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Sometimes things other than color dst need saturating, like if there is
a 'clamp(foo, 0.0, 1.0)'. So for saturated dst add the extra
instructions to fix up dst.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The 1st src to add.s needs (r) flag (repeat), otherwise it will end up:
add.s dst.xyzw, tmp.xxxx -1
instead of:
add.s dst.xyzw, tmp.xyzw, -1
Also, if we are using a temporary dst to avoid clobbering one of the src
registers, we actually need to use that as the dst for the sel
instruction.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Otherwise, the function would enable generic vertex attributes 0
and 1 of the array object it does not own. This was causing crashes
in Euro Truck Simulator 2, since the incorrectly enabled generic
attribute 0 in the foreign context got precedence before vertex
position attribute at later time, leading to NULL pointer dereference.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Petr Sebor <petr@scssoft.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit f2b844f59d)
Doesn't seem to help with bug 71363 but it fixed a failure I found in
my testing.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a66a008b17)
The normal drawing path does this, and it's necessary on Ivybridge,
so let's try it on Sandybridge too. It's not explicitly documented
as necessary, but might help with hangs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5563dfabc8)
From the documentation:
"[DevIVB] 3DSTATE_DEPTH_BUFFER must always be programmed along with the
other Depth/Stencil state commands(i.e. 3DSTATE_CLEAR_PARAMS,
3DSTATE_STENCIL_BUFFER, or 3DSTATE_HIER_DEPTH_BUFFER)."
We normally do this, but BLORP was failing to do so in the case where it
disables depth.
Not observed to fix anything yet.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 29e5d5db51)
For some reason, we put the flush in the caller, rather than just before
emitting the packet. This is more than a cosmetic problem: BLORP calls
gen6_emit_3dstate_multisample() directly, and so it missed the flush.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 65b1f642ac)
This is another non-pipelined command that needs a flush on Sandybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3aef1fefb4)
From the comments above intel_emit_post_sync_nonzero_flush:
"[DevSNB-C+{W/A}] Before any depth stall flush (including those
produced by non-pipelined state commands), software needs to first
send a PIPE_CONTROL with no bits set except Post-Sync Operation != 0."
This suggests that every non-pipelined (0x79xx) command needs a
post-sync non-zero flush before it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 436e815a25)
Otherwise the gen6 w/a in the kernel won't kick in and the write will
land nowhere.
Inspired by a patch Ken pointed me at which had the same issue (but
isn't yet merged and also for a gen7+ feature). An audit of the entire
driver didn't reveal any other case than the one in in the write_reg
helper used by the gen6 queryobj code.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Xinkai Chen <yeled.nova@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 32a3f5f6d7)
Conflicts:
src/mesa/drivers/dri/i965/gen6_queryobj.c
Before we were only checking the st->vertex_array_out_of_memory flag
after updating array state. But if there's two consecutive glDrawArrays
calls and the first one is skipped because of OOM, the second one should
be skipped too.
Cc: 9.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit d0eaf6752d)
There is nothing in the OpenGL specification which prevents the user from
calling glGenQueries to generate a new query object while another object is
active. Neither is there anything in the Mesa implementation which prevents
this. So remove the INVALID_OPERATION errors in this case.
Similarly, it is explicitly allowed by the OpenGL specification to delete an
active query, so remove the assertion for that case, replacing it with the
necesssary state updates to end the query, (clear the bindpt pointer and call
into the driver's EndQuery hook).
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 29996e2199)
This fixes compressedteximage piglit tests.
+10 piglits
Evergreen and Cayman have the same issue. R600 and R700 don't.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 57f38e9f92)
Conflicts:
src/gallium/drivers/radeonsi/r600_resource.h
src/gallium/drivers/radeonsi/si_state.c
If glBufferData(), glBufferSubData(0, obj->Size), or similar happens, we
get a new drm_intel_bo for the buffer object, and thus need to re-upload
texture buffer state so we point at the new data.
Fixes the new piglit GL_ARB_texture_buffer_object/data-sync
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit c0a9436d19)
Now that libEGL has been fixed to not leak all kinds of symbols, gbm
links to its own copy of the libwayland-drm.a helper library. That means
we can't rely on comparing the addresses of a static vtable symbol in that
library to determine if a wl_buffer is a wl_drm_buffer. Instead, we
move the vtable into the wl_drm struct and use that for comparing.
Backported from 360a141f24.
https://bugs.freedesktop.org/show_bug.cgi?id=69437
Cc: 9.2 <mesa-stable@lists.freedesktop.org>
This reverts commit fb3e55f898.
This commit was identified as causing the piglit
glx-create-context-current-no-framebuffer test to crash, (where, previously,
it merely failed without crashing).
LLVM 3.3 does not know about CIK processors, and the codes paths for SI
and CIK are the same.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9da4021626)
Instead of checking width==height in four places, just do it in
_mesa_legal_texture_dimensions() where we do the other width, height,
depth checks. Similarly, move the check that cube map array depth is
a multiple of 6.
This change also fixes some missing cube dimension checks for the
glTexStorage[23]D() functions.
Remove width==height assertion in _mesa_get_tex_max_num_levels() since
that's called before the other size checks for glTexStorage.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fa9c702164)
Fixes 3 texelFetch tests in piglit all.tests on ivb, and cubemap npot on gm45.
v2: Don't forget the gen4 DL=6 cubemap behavior.
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v1)
(cherry picked from commit 8da15d7544)
We hadn't run into order of operation warnings before, apparently, since
addition is so low on the order.
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit bfe6e5dda5)
We had a fixup for gen4's 3d-layout cubemaps (which, iirc, we'd
experimentally found to be necessary!), but while the spec still requires
it on gen5, we'd been missing it in the array-layout cubemaps.
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 791550aa8e)
For a few reasons.
1: In the (current) common case, these conditionals are never true. All
we're doing by checking them is slowing down MakeCurrent. The server
does these checks already anyway.
2: GLX >= 3.0 contexts may legally be made current without a bound
framebuffer.
This does not fix piglit/glx-create-context-current-no-framebuffer, but
is a prerequisite for fixing it.
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit e166a58c43)
In the array-of-struct case, recursion() takes the row_major flag for
each iteration from 't->fields.structure[i]', but 't' is not a record
type. Inherit the array declaration row_major flag instead.
This mistake was found by running piglit on valgrind.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69449
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b3c04362b4)
As we march over the source buffer we're uploading in pieces, we
need to memcpy from the current offset, not the start of the buffer.
Fixes graphical corruption when drawing very large vertex buffers.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matthew McClure <mcclurem@vmware.com>
(cherry picked from commit a50c5f8d24)
We return 0 for GL_NUM_SHADER_BINARY_FORMATS, so
GL_SHADER_BINARY_FORMATS should not write any data to the application
buffer.
Fixes piglit test 'arb_get_program_binary-overrun shader'.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 0667e2c969)
