For a 1D texture array, the border only applies to the width. For a 2D
texture array the border applies to the width and height but not the depth.
Sucha cases were not handled correctly in _mesa_init_teximage_fields().
Note: This is a candidate for stable branches
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit b5c409363c)
If you're resorting to the dummy shader, you've probably already turned
off SIMD16 mode. But if you didn't, it would die in a fire.
We could either fail to compile in SIMD16 mode...or just fix it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit df5963c256)
The dummy FB write failed to specify EOT and a message length, causing
the GPU to hang. Now we can enjoy "everyone's favorite color" again.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 393b42240f)
Now that we have a index_range_invalid flag, we can just use that rather
than calling vbo_validated_drawrangeelements directly and returning.
NOTE: This is a candidate for release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6e738d35c5)
This failed to take basevertex into account:
If basevertex < 0:
(end + basevertex) might actually be in-bounds while 'end' is not.
We would have clamped in this case when we probably shouldn't.
This could break application drawing.
If basevertex > 0:
'end' might be in-bounds while (end + basevertex) might not.
We would have failed to clamp in this place. There's a comment
indicating the TNL module depends on max_index being in-bounds;
if so, it would likely break horribly.
Rather than trying to clamp correctly in the face of basevertex, simply
delete the clamping code and indicate that we don't have a valid range.
This causes _tnl_vbo_draw_prims to use vbo_get_minmax_indices() to
compute the actual bounds, which is much safer.
NOTE: This is a candidate for release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 112b02c324)
The application supplied [start, end] range is merely a conservative
hint of the ranges of index values inside the index buffer. There is no
requirement that all vertices in the range [start, end] be referenced.
Passing an 'end' value larger than the maximum legal index is perfectly
acceptible; applications can legally pass 0xffffffff when they don't
have a tighter bound readily available.
Thus, the warning doesn't indicate a correctness issue; it could only
indicate a performance issue. However, it does not even do that.
glDrawRangeElements is designed to optimize non-VBO vertex data uploads
by providing an upper bound on the size of buffers a driver would need
to allocate. With VBOs, the data is already in an uploaded buffer, so
the range doesn't help.
The clincher is: we only know _MaxElement for VBOs. For user-space
arrays, we just set it to 2,000,000,000 (see mesa/main/varray.h:63.)
So we can only check this in the case where it is not useful.
Many applications, including the Unigine demos, currently trigger this
warning, which suggests the applications are buggy when they're actually
fine. Eliminating the warning should confuse users less while not
actually losing any benefit to application developers.
NOTE: This is a candidate for release branches.
Suggested-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit f9be8543aa)
If the texture format is integer, the incoming user data must also be
integer (and similarly for non-integer textures).
NOTE: This is a candidate for the stable branches.
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 6f3d918409)
Fixes (with the previous commit) piglit GL_ARB_multisample/pushpop.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit b631b471d8)
In the table of of push/pop attributes, this one doesn't fall under
the enable group.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 4b6e45c7d6)
Avoid unrollong loops that are either nested loops or
where the loop body times the unroll count is huge.
The change is far from being perfect but it extends the
loop unrolling decision heuristic by some additional
safeguard. In particular this cuts down compilation of
a shader precomputing atmospheric scattering integral
tables containing two nesting levels in a loop from
something way beyond some minutes (I never waited for
it to finish) to some fractions of a second.
This fixes piglit tests glsl-fs-unroll-explosion and
glsl-vs-unroll-explosion on r600g.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
(cherry picked from commit 67007080b7)
We were doing saturate-based clamping on the [0,width] or [0,height]
coordinate, which meant only the first pixel was addressable.
Fixes piglit ARB_texture_rectangle/texwrap-RECT-bordercolor
NOTE: This is a candidate for the 8.0 release branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7c857a6b15)
We should be able to merge self-move instruction into the MRF move
anyway, and this simplifies things for the next commit.
NOTE: This is a candidate for the 8.0 release branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 07e621c523)
There is a mismatch between the way the X server and GLX library
calculates the image size for format GL_DEPTH_STENCIL(|_NV|_EXT)
See https://bugs.freedesktop.org/show_bug.cgi?id=30102
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
(cherry picked from commit 8937c166ef)
in check_index_bounds the comparison needs to be "greater equal" since
contrary to the name _MaxElement is the count of the array (this matches
similar code in vbo_exec_DrawRangeElementsBaseVertex).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1f4a853b1e)
The node_attrsz[] array is initially copied from the node->attrsz[]
array but some values get rewritten. Thereafter, we need to use the
node_attrsz[] values.
Fixes a bug when replaying a display list that uses generic vertex
array[16] (at least).
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit e53557996e)
This just copies what the LUMINANCE_ALPHA bits do.
Fixes piglit tests on softpipe complaining about missing unpack.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit fef395c0c3)
GL_UNPACK_LSB_FIRST only applies to bitmap data, not glReadPixels.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 343100d1fc)
Fixes piglit ARB_copy_buffer-overlap, on swrast, which previously
assertion failed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 531e44415b)
Fixes glsl-const-folding-01. inversesqrt(1.0) != 1.0 was evaluating as
true.
Signed-off-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 2fdbbeca43)
Those IDs are used by Bromolow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit a45247fb1b)
Conflicts:
include/pci_ids/i965_pci_ids.h
Noticed by clang:
brw_wm_surface_state.c:330:30: warning: initializer overrides prior
initialization of this subobject [-Winitializer-overrides]
[MESA_FORMAT_Z24_S8] = 0,
^
brw_wm_surface_state.c:326:30: note: previous initialization is here
[MESA_FORMAT_Z24_S8] = 0,
^
No functionality change, since the array is declared static so
it was zero-initialized by default.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit dd32df3829)
Fix wrong cube/3D texture layout for the tailing levels whose width or
height is smaller than the align unit.
From 965 B-spec http://intellinuxgraphics.org/VOL_1_graphics_core.pdf at
page 135:
All of the LOD=0 q-planes are stacked vertically, then below that,
the LOD=1 qplanes are stacked two-wide, then the LOD=2 qplanes are
stacked four-wide below that, and so on.
Thus we should always inrease pack_x_nr, which results to the pitch of LODn
may greater than the pitch of LOD0. So we should refactor mt->total_width
when needed.
This would fix the following webgl test case on all gen4 platforms:
conformance/textures/texture-size-cube-maps.html
NOTE: This is a candidate for stable release branches.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit f939776cb2)
The code is no longer relevant.
Note: this driver is probably broken now. There's no implementation
of ctx->Driver.Map/UnmapRenderbuffer().
(cherry picked from commit 4a1c660599)
Instruction attributes like WriteALUResult and ALUResultCompare
were being discarded during the some of the local transformations.
This fixes the following piglit tests:
glsl1-inequality (vec2, pass)
loopfunc
fs-any-bvec2-using-if
fs-op-ne-bvec2-bvec2-using-if
fs-op-ne-ivec2-ivec2-using-if
fs-op-ne-mat2-mat2-using-if
fs-op-ne-vec2-vec2-using-if
fs-op-ne-mat2x3-mat2x3-using-if
fs-op-ne-mat2x4-mat2x4-using-if
https://bugs.freedesktop.org/show_bug.cgi?id=45921
(cherry-picked from commit 73249239cf)
The loop registers weren't being cleared, so any shader that was
executed after a shader containing loops was at risk of having a loop
randomly inserted into it.
This fixes over one hundred piglit tests, although these test
only failed during full piglit runs and would pass if
run individually. The exact number of piglit tests that this patch
fixes will vary depending on the version of piglit and the order the
tests are run.
(cherry-picked from commit 4a269a8dc0)
There's a serious trap for drivers: RenderTexture() does not indicate
that the texture is currently bound to the draw buffer, despite
FinishRenderTexture() signaling that the texture is just now being
unbound from the draw buffer.
We were acting as if RenderTexture() *was* the start of rendering and
that we could make texturing incoherent with the current contents of
the renderbuffer. This caused intel oglconform sRGB
Mipmap.1D_textures to fail, because we got a call to TexImage() and
thus RenderTexture() on a texture bound to a framebuffer that wasn't
the draw buffer, so we skipped validating the new image into the
texture object used for rendering.
We can't (easily) make RenderTexture() indicate the start of drawing,
because both our driver and gallium are using it as the moment to set
up the renderbuffer wrapper used for things like MapRenderbuffer().
Instead, postpone the setup of the workaround render target miptree
until update_renderbuffer time, so that we no longer need to skip
validation of miptrees used as render targets. As a bonus, this
should make GL_NV_texture_barrier possible.
(This also fixes a regression in the gen4 small-mipmap rendering since
3b38b33c16, which switched
set_draw_offset from image->mt to irb->mt but didn't move the irb->mt
replacement up before set_draw_offset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44961
NOTE: This is a candidate for the 8.0 branch.
From the GLSL 1.30 spec:
The discard keyword is only allowed within fragment shaders. It
can be used within a fragment shader to abandon the operation on
the current fragment. This keyword causes the fragment to be
discarded and no updates to any buffers will occur. Control flow
exits the shader, and subsequent implicit or explicit derivatives
are undefined when this control flow is non-uniform (meaning
different fragments within the primitive take different control
paths).
v2: Don't emit the final HALT if no other HALTs were emitted.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Noticed by clang:
egl_st.c:57:50: warning: field precision should have type 'int',
but argument has type 'size_t' (aka 'unsigned long') [-Wformat]
ret = util_snprintf(path, sizeof(path), "%.*s/%s" UTIL_DL_EXT,
~~^~
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 2bb91274e2)
C still treats array arguments exactly like pointer arguments.
By sheer coincidence, this still worked fine on 64-bit
machines where 2 * sizeof(float) == sizeof(void*), but not
on 32-bit.
Noticed by clang:
text.c:76:51: warning: sizeof on array function parameter will
return size of 'const VGfloat *' (aka 'const float *') instead of
'const VGfloat [2]' [-Wsizeof-array-argument]
memcpy(glyph->glyph_origin, glyphOrigin, sizeof(glyphOrigin));
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6a491b5728)
Noticed by clang:
eglimage.c:48:28: warning: argument to 'sizeof' in 'memset' call is
the same expression as the destination; did you mean to dereference
it? [-Wsizeof-pointer-memaccess]
memset(attrs, 0, sizeof(attrs));
~~~~~ ^~~~~
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 071501a681)
Most of the 256 values in the 'generic_to_slot' table were supposed to
be initialized with the default value 0xff, but were left at zero
(from CALLOC_STRUCT()) instead.
Noticed by clang:
u_linkage.h:60:31: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination;
did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess]
memset(table, 0xff, sizeof(table));
~~~~~ ^~~~~
Also fix a signed/unsigned comparison and a comment typo here.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 520521e380)
container_of() can legally return anything, even invalid addresses
that cause segfaults, when 'sample' is an uninitialized pointer.
Bug exposed by clang.
NOTE: This is a candidate for the 8.0 branch.
(cherry picked from commit ccff749712)
