This was using the wrong extension, ARB_stencil_texturing
doesn't mention any changes in this area.
Fixes "dEQP-GLES3.functional.fbo.completeness.renderable.texture.
stencil.stencil_index8."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90751
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f7aad9da20)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
Broadwell's stencil blitting code attempts to bind a renderbuffer as a
texture, using dd->BindRenderbufferTexImage().
This calls _mesa_init_teximage_fields(), which then attempts to set
img->_BaseFormat = _mesa_base_tex_format(ctx, internalFormat), which
assert fails if internalFormat is GL_STENCIL_INDEX8 but
ARB_texture_stencil8 is unsupported.
To work around this, just pretend to support the extension momentarily,
during the blit. Meta has already munged a variety of other things in
the context (including the API!), so it's not that much worse than what
we're already doing.
Fixes regressions since commit f7aad9da20
(mesa/teximage: use correct extension for accept stencil texture.).
v2: Add an XXX comment explaining the situation (requested by Jason
Ekstrand and Martin Peres), and an assert that we don't support
the extension so we remember to remove this hack (requested by
Neil Roberts).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit f83b9e58f6)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
Mesa supports EXT_texture_rg and OES_texture_float. This patch adds
support for using unsized enums GL_RED and GL_RG for floating point
targets and writes proper checks for internalformat when format is
GL_RED or GL_RG and type is of GL_FLOAT or GL_HALF_FLOAT.
Later, internalformat will get adjusted by adjust_for_oes_float_texture
after these checks.
v2: simplify to check vs supported enums
v3: follow the style and break out if internalFormat ok (Kenneth)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90748
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5b0d6f5c1b)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
This reverts commit f3b709c0ac.
The "dEQP-GLES3.functional.rasterization.fbo.rbo_multisample_4.
interpolation.lines_wide" test appears to be broken on Cherryview when
we expose line widths greater than 12.0. I'm not sure why.
For now, just go back to the limits we used on older platforms.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90902
Acked-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 16658f426d)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
commit 472ef9a02f introduced code to
change the types of SEL and MOV instructions for moves that simply
"copy bits around". It didn't account for type conversion moves,
however. So it would happily turn this:
mov(8) vgrf6:D, -vgrf5:D
mov(8) vgrf7:F, vgrf6:UD
into this:
mov(8) vgrf6:D, -vgrf5:D
mov(8) vgrf7:D, -vgrf5:D
which erroneously drops the conversion to float.
Cc: "11.0 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 2ace64fd59)
The lowered code reads from the destination, which isn't possible from
message registers.
Fixes the following dEQP tests on SNB:
dEQP-GLES3.functional.shaders.precision.int.highp_mul_fragment
dEQP-GLES3.functional.shaders.precision.int.mediump_mul_fragment
dEQP-GLES3.functional.shaders.precision.int.lowp_mul_fragment
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 9390cb8459)
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 9b510a9652)
Conflicts:
src/gallium/drivers/radeonsi/si_shader.h
src/gallium/drivers/radeonsi/si_state_shaders.c
I've been chasing a geom shader hang on rv635 since I wrote
r600 geom code, and finally I hacked some values from fglrx
in and I could run texelfetch without failures.
This is totally my fault as well, maths fail 101.
This makes geom shaders on r600 not fail heavily.
Cc: "10.6" "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 0de53ccc8c)
As Glenn did for finalize_loop we need to update_cf when we
add a POP at the end of a shader.
I think this fixes one of the earlier shader going off end
of memory problems we've stopped.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.6" "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 3063913f77)
This adds index queries (glGet*i_v) for GL_TEXTURE_BINDING_* and
GL_SAMPLER_BINDING, as well as textue queries
(glGetTex{,ture}Parameter*) for GL_TEXTURE_TARGET.
CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
(cherry picked from commit 5aaaaebf22)
Conflicts:
src/mesa/main/texparam.c
Cube maps are special in that they have separate teximages for each
face. We handled that by copying the data to them separately, but in
case zoffset != 0 or depth != 6 we would read off the end of the client
array or modify the wrong images.
zoffset/depth have already been verified by the time the code gets to
this stage, so no need to double-check.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2259b11100)
The split_virtual_grfs code doesn't properly rewrite reladdr so we need to
make sure that any uniform indirects are lowered away first.
This fixes the glsl-fs-uniform-indexed-by-swizzled-vec4.shader_test in piglit
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fee0c5af11)
This works if drivers upsample on upload (like all radeon ones do).
The alternative is an unexpected GL error from anything calling
_mesa_update_state and possibly other issues.
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f432ae899f)
This fixes GL45-CTS.gtf44.GL31Tests.texture_stencil8.texture_stencil8_gl44
from the ogl conform suite.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 529acab22a)
On the older platforms where we don't have logical contexts preserving
state across batches, we emit the invariant state setup on every batch
using the brw_invariant_state atom. This includes the pipeline selection
which is cached with the introduction of
commit 0e0e23ef53
Author: Jordan Justen <jordan.l.justen@intel.com>
Date: Wed Apr 22 11:43:50 2015 -0700
i965/state: Emit pipeline select when changing pipelines
However, we do not reset the cache between batches on context-less
platforms resulting in us not setting the pipeline selection and can
cause GPU hangs if a media pipelined was loaded in the meantime (e.g.
mixing mplayer/gstreamer using libva and gnome-shell). A simple solution
is to just forcibly re-emit the pipeline select along with the invariant
state and reset the cache at that point.
Reported-and-tested-by: Tomasz C. <tomaszc@o2.pl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91254
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4e5752e2b7)
Resource list can be created properly only after LinkShader hook
has been called to make sure all dead variables have been removed.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90925
(cherry picked from commit f045b8b2ff)
This is required so that we can move resource list creation
to happen later.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
(cherry picked from commit 73afa31f07)
Instead of using symbol table, build mask by inspecting IR. This
change is required by further patches to move resource list creation
to happen later when symbol table does not exist anymore.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
(cherry picked from commit ccaf37f449)
The CTS packed_pixels test checks that readpixels doesn't write
into the space between rows, however we fail that here unless
we check the format and stride match.
This fixes all the core mesa problems with CTS packed_pixels
tests.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 32769ac016)
The fastpath currently checks the RowLength != width, but
if you have a RowLength of 7, and Alignment of 4, then
that shouldn't match.
align the rowlength to the pack alignment before comparing.
This fixes compressed cases in CTS packed_pixels_pixelstore
test when SKIP_PIXELS is enabled, which causes row length
to get set.
v1.1: add fxt1 fix (Iago)
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b4a70401f5)
We don't need to use the 3d image address here as that will
include SKIP_IMAGES, and we are only blitting a single
2D anyways, so just use the 2D path.
This fixes some memory overruns under CTS
packed_pixels.packed_pixels_pixelstore when PACK_SKIP_IMAGES
is used.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6a3e1fb958)
Fixes regression from
commit 8c17d53823
Author: Kenneth Graunke <kenneth@whitecape.org>
Date: Wed Apr 15 03:04:33 2015 -0700
i965: Make intel_emit_linear_blit handle Gen8+ alignment restrictions.
which adjusted the coordinates to be relative to the nearest cacheline.
However, this then offsets the coordinates by up to 63 and this may then
cause them to overflow the BLT limits. For the well aligned large
transfer case, we can use 32bpp pixels and so reduce the coordinates by
4 (versus the current 8bpp pixels). We also have to be more careful
doing the last line just in case it may exceed the coordinate limit.
Reported-and-tested-by: kaillasse91@hotmail.fr
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90734
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit d38a560106)
[Emil Velikov: drop the extra INTEL_MIPTREE_TRMODE_NONE arguments]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/mesa/drivers/dri/i965/intel_blit.c
Shaders that contain instruction data after an instruction with EOP could end
up parsing that as an instruction, leading to various crashes and asserts in
SB as it gets very confused if it sees for instance a loop start instruction
jumping off to some random point.
Add a couple of asserts, and print EOP bit if set in old asm printer.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a830225adb)
e8e443 missed adding check for undef values also in
unreserve function, leading to an assert triggering.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 36f1999a87)
GetTexImage can read to stencil8 but only from
a stencil or depthstencil textures.
This fixes a bunch of failures in CTS
GL33-CTS.gtf32.GL3Tests.packed_pixels
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c1452983b4)
[Emil Velikov: use glGetTex%sImage + suffix, instead of caller]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This was missed when I did fp64, I've sent a piglit test to cover
the case as well.
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 45971fd0df)
When the edge flag element is enabled then the elements are slightly
reordered so that the edge flag is always the last one. This was
confusing the code to upload the 3DSTATE_VF_INSTANCING state because
that is uploaded with a separate loop which has an instruction for
each element. The indices used in these instructions weren't taking
into account the reordering so the state would be incorrect.
v2: Use nr_elements instead of brw->vb.nr_enabled so that it will cope
when gl_VertexID is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91292
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit 3a1ab23480)
The edge flag data on Gen6+ is passed through the fixed function hardware as
an extra attribute. According to the PRM it must be the last valid
VERTEX_ELEMENT structure. However if the vertex ID is also used then another
extra element is added to source the VID. This made it so the vertex ID is in
the wrong register in the vertex shader and the edge attribute is no longer in
the last element.
v2: Also implement for BDW+
v3 [by Ben]: Remove 10.5 tag. Too late.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84677
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit fb02b4ec48)
Nine code uses some C11 features, and this
leads to compile error on gcc <= 4.5
Another way would have been to use the
-fms-extensions CFLAG
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: "10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 56717c0b06)
We have to re-validate FBOs rendering to the texture like is done
with TexImage and CopyTexImage.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91673
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7eda897bf0)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 11,0 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This is done by returning an rvalue of type void in the
ast_function_expression::hir function instead of a void expression.
This produces (in the case of the ternary) an hir with a call
to the void returning function and an assignment of a void variable
which will be optimized out (the assignment) during the optimization
pass.
This fix results in having a valid subexpression in the many
different cases where the subexpressions are functions whose
return values are void.
Thus preventing to dereference NULL in the following cases:
* binary operator
* unary operators
* ternary operator
* comparison operators (except equal and nequal operator)
Equal and nequal had to be handled as a special case because
instead of segfaulting on a forbidden syntax it was now accepting
expressions with a void return value on either (or both) side of
the expression.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85252
Signed-off-by: Renaud Gaubert <renaud@lse.epita.fr>
Reviewed-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
(cherry picked from commit 7b9ebf879b)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
When gl_VertexID or gl_InstanceID is used a 3DSTATE_VF_SGVS
instruction is sent to create a sort of element to store the generated
values. The last instruction in this chunk of code looks like it was
trying to set the instancing state for the element using the
3DSTATE_VF_INSTANCING instruction. However it was sending
brw->vb.nr_buffers instead of the element index. This instruction is
supposed to take an element index and that is how it is used further
down in the function so the previous code looks wrong. Perhaps
previously the number of buffers coincidentally matched the number of
enabled elements so the value was generally correct anyway. In a
subsequent patch I want to change a bit how it chooses the SGVS
element index so this needs to be fixed.
v2 [by Ben]
Remove stable 10.5 stable tag (it's too late now)
Commit update as follows:
The number of vertex buffers emitted is always <= the number of vertex elements.
To maximize reuse (actually, to minimize relocations - according to the code
comments), a vertex buffer is only emitted once, even when we setup multiple
components (3DSTATE_VERTEX_ELEMENT) from that buffer. This meant that the
previous code would use the wrong indexed element for these reuse cases. This
patch by itself prevents hangs on BSW in the linked bug. It doesn't make the
test pass, the remaining patches are needed for that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91610
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c03247bae0)
In the DRI2 path this event is magically synthesized from the
corresponding DRI2 event, but with Present, the server sends us the
event itself. The DRI2 path fills in the serial number, send_event, and
display fields of the XEvent struct that the app sees, but the Present
path did not.
This is likely related to a class of crashes seen in gtk/clutter apps:
https://bugzilla.redhat.com/attachment.cgi?id=1032631
Note that the crashing instruction is looking up the lock_fns slot in
the Display *, and %rdi (holding the Display *) is 0x1.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8f7ebcb6fa)
This fixes arb_get_texture_sub_image-get, and any situation where the 2d
engine was being used for multi-layer blits to a non-0 level.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2514c78fba)
