This will affect MTL which will have fp64 support without int64
support.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iván Briano <ivan.briano@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19284>
v2: drop the hardcoded inst->mlen=1 (Rohan)
v3: Move back to LOAD/STORE messages (limited to SIMD16 for LSC)
v4: Also use 4 GRFs transpose loads for fills (Curro)
v5: Reduce amount of needed register to build per lane offsets (Curro)
Drop some now useless SIMD32 code
Unify unspill code
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17555>
Fixes the following EU validation error:
ERROR: Header must be present for all URB messages.
The message header is ignored for URB fence messages, so I doubt that
this actually matters in practice. But we should probably mark it as
present, because you have to send something, and according to the
documentation, there is a message header, it's just ignored.
Fixes: e6a9501aa2 ("intel/fs: Add the URB fence message")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17624>
This structure will contain the opcode mapping tables in the next
commit. For now, this is the mechanical change to plumb it into all
the necessary places, and it continues simply holding devinfo.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17309>
We haven't exposed this intrinsic as it doesn't directly correspond to
anything in SPIR-V. However, it's used internally by some NIR passes,
namely nir_opt_uniform_atomics().
We reuse most of the infrastructure in brw_find_live_channel, but with
LZD/ADD instead of FBL. A new SHADER_OPCODE_FIND_LAST_LIVE_CHANNEL is
like SHADER_OPCODE_FIND_LIVE_CHANNEL but from the other side.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15484>
For any fence greater than local scope, always set flush type to at
least invalidate so that fence goes on properly.
v2: Fixup condition to trigger workaround (Lionel)
v3: Simplify workaround (Curro)
v4: Don't drop the existing WA (Curro)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: 22.0 <mesa-stable>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14947>
brw_find_next_block_end() scans through the instructions to find the end
of the block. We were calling it for every instruction in the program
which is, if you have a single basic block, makes the whole mess a nice
clean O(n^2) when it really doesn't need to be. Instead, only call
brw_find_next_block_end() as-needed. This brings it back to O(n) like
it should have been.
This cuts the runtime of the following Vulkan CTS on my SKL box by 5%
from 1:51 to 1:45: dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13734>
Having an integer destination type instead of a float destination type
confuses the SWSB code. This causes problems on some Intel GPUs. Fix
this by using the correct type in the destination of the F32TOF16
opcode.
Gfx7 doesn't have the HF type, so continue to emit W on that platform.
The assertions in brw_F32TO16 (brw_eu_emit.c) are updated to reflect
this. In scalar mode, UD is never emitted as a destination type for
this opcode, so remove it from the allowed types in the assertion.
I also condidered doing something like de55fd358f ("intel/fs/xehp:
Teach SWSB pass about the exec pipeline of
FS_OPCODE_PACK_HALF_2x16_SPLIT."), but Curro recommended that just using
the correct types is a better fix. I agree.
v2: Add missing changes to fs_generator::generate_pack_half_2x16_split.
I'm not sure how I (and the Intel CI) missed that the first time. :(
v3: Fix copy-and-paste issue in the v2 fix. Noticed by Tapani.
Reviewed-by: Francisco Jerez <currojerez@riseup.net> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14181>
When they re-arranged all the dataport stuff and added the LSC, doing
URB fencing through the dataport no longer makes sense. Instead, there
is now a fence message on the URB shared function.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13092>
v2: Very significant rebase on changes to previous commits.
Specifically, brw_fs_nir.cpp changes were pretty much rewritten from
scratch after changing the NIR opcode names and types.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12142>
Setting it to GPU can cause an L3$ flush in certain cases. That's not
what we want as we really only care about coherency within the GPU.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Sagar Ghuge <sagar@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12291>
This commit adds a delta to be added to the relocated value as well as
the possibility of multiple types of relocations.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
There were two bugs which crep in here as part of 64551610d1:
forgetting that exec sizes in HW are in log2 space and having the
exec_size condition for the subtype backwards.
Fixes: 64551610d1 "intel/compiler: rework message descriptors..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10588>
It's a Gen6 XFB thing. It's never used for anything else so there's no
point in having a target cache switch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
v2: Use the new inst->ex_desc field (Jason)
v3: Drop CPS LoD compensation from sampler messages (Lionel)
v4: Drop useless uses_rate_shading (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
Render target message descriptors are slightly different from the
dataport ones. In particular the msg_type field is on bits 14:17 for
RT while bits 14:18 for DP.
v2: Drop unused send_commit_msg field in brw_fb_write_desc() (Ken)
v3: Rebase on top renaming (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
The execution units of XeHP platforms have multiple asynchronous ALU
pipelines instead of (as far as software is concerned) the single
in-order pipeline that handled most ALU instructions except for
extended math in the original Xe. It's now the compiler's
responsibility to identify cross-pipeline dependencies and insert
synchronization annotations whenever necessary, which are encoded as
some additional bits of the SWSB instruction field.
This commit represents the cross-pipeline synchronization annotations
as part of the existing tgl_swsb structure used for codegen. The
existing tgl_swsb_*() helpers used by hand-crafted assembly are
extended to default to TGL_PIPE_ALL big-hammer synchronization in
order to ensure backwards compatibility with the existing assembly.
The following commits will extend the software scoreboard lowering
pass in order to keep track of cross-pipeline dependencies across IR
instructions, and insert more specific pipeline annotations in the
SWSB field.
The disassembler is also extended here to print out any existing
pipeline sync annotations.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10000>
clang generates a warning if there's no explicit break or fall-through
annotation. The latter would be kind of silly in this case, and not
robust against any future changes turning the fall-through invalid.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
One exception is src/amd/addrlib/, for which -Wimplicit-fallthrough is
explicitly disabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
I meant to do this years ago when I first added SHADER_OPCODE_SEND. At
the time, the only use for the extended descriptor was bindless handles
which were always one thing and never non-constant. However, it doesn't
actually require any extra instructions because we have to OR in ex_mlen
anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8748>
The immediate case is pretty uncommon to see but it can happen, in
theory. BROADCAST is typically used to uniformize values and those are
usually 32-bit. However, it does come up in some subgroup ops.
Fixes: 49c21802cb "intel/compiler: Split has_64bit_types into float/int"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6211>
We don't want to use it on gen5 and earlier because only RNDD can be
done with a single instruction and we can implement RNDU(x) as -RNDD(-x)
so it's better to just do that when we have the instruction. On gen6
and above, we may as well just use the right instruction.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5596>
Using HALT to immediately jump to the end of the shader is required to
implement GL_EXT_gpu_shader4 and OpenGL 3.0. However, vanilla OpenGL
1.2 doesn't forbid it and it likely makes something somewhere faster.
We should be consistent and implement the same discard behavior on all
hardware if we can.
The rules for HALT on Gen4-5 are a bit different from Gen6+. On the
older hardware, there is no stack for HALT; instead it's up to software
to save and restore mask registers. However, there's no real saving
needed since we only use HALT to jump to the end of the program where
we're about about to do our FB writes. All we need to do is reset AMask
to DMask, the value it was initialized to at the start of the thread.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5244>
Instead of emitting the stall MOV "inside" the
SHADER_OPCODE_MEMORY_FENCE generation, use the scheduling fences when
creating the IR.
For IvyBridge, every (data cache) fence is accompained by a render
cache fence, that now is explicit in the IR, two
SHADER_OPCODE_MEMORY_FENCEs are emitted (with different SFIDs).
Because Begin and End interlock intrinsics are effectively memory
barriers, move its handling alongside the other memory barrier
intrinsics. The SHADER_OPCODE_INTERLOCK is still used to distinguish
if we are going to use a SENDC (for Begin) or regular SEND (for End).
This change is a preparation to allow emitting both SENDs in Gen11+
before we can stall on them.
Shader-db results for IVB (i965):
total instructions in shared programs: 11971190 -> 11971200 (<.01%)
instructions in affected programs: 11482 -> 11492 (0.09%)
helped: 0
HURT: 8
HURT stats (abs) min: 1 max: 3 x̄: 1.25 x̃: 1
HURT stats (rel) min: 0.03% max: 0.50% x̄: 0.14% x̃: 0.10%
95% mean confidence interval for instructions value: 0.66 1.84
95% mean confidence interval for instructions %-change: 0.01% 0.27%
Instructions are HURT.
Unlike the previous code, that used the `mov g1 g2` trick to force
both `g1` and `g2` to stall, the scheduling fence will generate `mov
null g1` and `mov null g2`. During review it was decided it was not
worth keeping the special codepath for the small effect will have.
Shader-db results for HSW (i965), BDW and SKL don't have a change
on instruction count, but do report changes in cycles count, showing
SKL results below
total cycles in shared programs: 341738444 -> 341710570 (<.01%)
cycles in affected programs: 7240002 -> 7212128 (-0.38%)
helped: 46
HURT: 5
helped stats (abs) min: 14 max: 1940 x̄: 676.22 x̃: 154
helped stats (rel) min: <.01% max: 2.62% x̄: 1.28% x̃: 0.95%
HURT stats (abs) min: 2 max: 1768 x̄: 646.40 x̃: 362
HURT stats (rel) min: <.01% max: 0.83% x̄: 0.28% x̃: 0.08%
95% mean confidence interval for cycles value: -777.71 -315.38
95% mean confidence interval for cycles %-change: -1.42% -0.83%
Cycles are helped.
This seems to be the effect of allocating two registers separatedly
instead of a single one with size 2, which causes different register
allocation, affecting the cycle estimates.
while ICL also has not change on instruction count but report changes
negative changes in cycles
total cycles in shared programs: 352665369 -> 352707484 (0.01%)
cycles in affected programs: 9608288 -> 9650403 (0.44%)
helped: 4
HURT: 104
helped stats (abs) min: 24 max: 128 x̄: 88.50 x̃: 101
helped stats (rel) min: <.01% max: 0.85% x̄: 0.46% x̃: 0.49%
HURT stats (abs) min: 2 max: 2016 x̄: 408.36 x̃: 48
HURT stats (rel) min: <.01% max: 3.31% x̄: 0.88% x̃: 0.45%
95% mean confidence interval for cycles value: 256.67 523.24
95% mean confidence interval for cycles %-change: 0.63% 1.03%
Cycles are HURT.
AFAICT this is the result of the case above.
Shader-db results for TGL have similar cycles result as ICL, but also
affect instructions
total instructions in shared programs: 17690586 -> 17690597 (<.01%)
instructions in affected programs: 64617 -> 64628 (0.02%)
helped: 55
HURT: 32
helped stats (abs) min: 1 max: 16 x̄: 4.13 x̃: 3
helped stats (rel) min: 0.05% max: 2.78% x̄: 0.86% x̃: 0.74%
HURT stats (abs) min: 1 max: 65 x̄: 7.44 x̃: 2
HURT stats (rel) min: 0.05% max: 4.58% x̄: 1.13% x̃: 0.69%
95% mean confidence interval for instructions value: -2.03 2.28
95% mean confidence interval for instructions %-change: -0.41% 0.15%
Inconclusive result (value mean confidence interval includes 0).
Now that more is done in the IR, more dependencies are visible and
more SWSB annotations are emitted. Mixed with different register
allocation decisions like above, some shaders will see more `sync
nops` while others able to avoid them.
Most of the new `sync nops` are also redundant and could be dropped,
which will be fixed in a separate change.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3278>
Change brw_memory_fence to return the number of messages emitted, and
use that to update the send_count statistic in code generation.
This will fix the book-keeping for IVB since the memory fences will
result in two SEND messages.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4646>
The instruction encoding for SENDS changed on Gen12 and it now supports
embedding the entire extended message descriptor in the instruction if
it's an immediate. Stop falling back to doing an indirect SEND just
because we had something in [15:12] of ex_desc.ud.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>
Gen4/5's rounding instructions operate differently than later Gens'.
They all return the floor of the input and the "Round-increment"
conditional modifier answers whether the result should be incremented by
1.0 to get the appropriate result for the operation (and thus its
behavior is determined by the round opcode; e.g., RNDZ vs RNDE).
Since this requires a second instruciton (a predicated ADD) that
consumes the result of the round instruction, the round instruction
cannot write its result directly to the (write-only) message registers.
By emitting the ADD in the generator, the backend thinks it's safe to
store the round's result directly to the message register file.
To avoid this, we move the emission of the ADD instruction to the NIR
translator so that the backend has the information it needs.
I suspect this also fixes code generated for RNDZ.SAT but since
Gen4/5 don't support GLSL 1.30 which adds the trunc() function, I
couldn't write a piglit test to confirm. My thinking is that if x=-0.5:
sat(trunc(-0.5)) = 0.0
But on Gen4/5 where sat(trunc(x)) is implemented as
rndz.r.f0 result, x // result = floor(x)
// set f0 if increment needed
(+f0) add result, result, 1.0 // fixup so result = trunc(x)
then putting saturate on both instructions will give the wrong result.
floor(-0.5) = -1.0
sat(floor(-0.5)) = 0.0
// +1 increment would be needed since floor(-0.5) != trunc(-0.5)
sat(sat(floor(-0.5)) + 1.0) = 1.0
Fixes: 6f394343b1 ("nir/algebraic: i2f(f2i()) -> trunc()")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2355
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Alignment requirements may have changed the horizontal stride already,
so don't set it if not required to avoid breaking said requirements.
Fixes several tests such as
dEQP-VK.subgroups.vote.graphics.subgroupallequal_int8_t
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On Gen >= 12, if src0 or src2 holds immediate value, we need set
src[0/2]_is_imm bits instead of register file.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
