We need to return immediately after inserting instructions that require
S_WAITCNT so that the parent class' custom inserter won't try to insert
them again.
Fix uninitialized scalar variable defects report by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
We should just set the bits of functionality that we support; the
GL/ES1/ES2 flags in extensions.c will take care of advertising the
appropriate extensions for the current API.
This enables the GL_EXT_texture_compression_dxt1 extension on ES1/ES2
when libtxc_dxtn is installed or the force_s3tc driconf option is set.
The main extension code set this up properly, but the ES-specific code
failed to do so.
Otherwise, the extension strings reported by es1_info, es2_info, and
glxinfo all remain the same.
This patch manually disables the ARB_framebuffer_object bit on ES
to preserve the behavior of 1c0f5d8324.
v2: Rebase, fix the i915 Makefile, and unconditionally set the
OES_draw_texture bit as core Mesa will only apply it to ES1 now.
Tested-by: Daniel Charles <daniel.charles@intel.com> [v1]
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> [v1]
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This extension appears to be written against ES 1.0.
In ES 2.0, you really want to be using FBOs instead.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
If the primitive restart index and the primitive type can
be handled by the cut index feature, then use the hardware
to handle the primitive restart feature.
The VBO module's software handling of primitive restart is
used as a fall back.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When brw->prim_restart.enable_cut_index is set, the cut index
will be enabled when uploading index_buffer commands.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For newer hardware we disable the VBO module's software handling
of primitive restart. We now handle primitive restarts in
brw_handle_primitive_restart.
The initial version of brw_handle_primitive_restart simply calls
vbo_sw_primitive_restart, and therefore still uses the VBO
module software primitive restart support.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When considering which components of a variable were killed by an
assignment, constant propagation would previously just use the write
mask of the assignment. This worked if the LHS of the assignment was
simple, e.g.:
v.xy = ...; // (assign (xy) (var_ref v) ...)
But it did the wrong thing if the LHS of the assignment involved an
array indexing operator, since in this case the write mask is always
(x):
v[i] = ...; // (assign (x) (deref_array (var_ref v) (var_ref i)) ...)
In general, we can't predict which vector component will be selected
by array indexing, so the only safe thing to do in this case is to
kill the entire variable.
Fixes piglit tests {fs,vs}-vector-indexing-kills-all-channels.shader_test.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Put unit tests in src/glsl/tests rather than tests/glsl.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Now that the linker handles initializers of samplers just like any
other uniform, a bunch of this annoying code is unnecessary.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This work is now done by the linker, so we don't need to keep doing it
here.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The linker may have set initial values for uniforms. Propagate these
values to the driver's backing storage when it is first associated.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The spec requires that samplers be initialized to 0. Since this
differs from the 1-to-1 mapping of samplers to texture units assumed
by ARB assembly shaders (and the gl_program structure), be sure to
propagate this date from the gl_shader_program to the gl_program.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
CC: Vadim Girlin <vadimgirlin@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49088
v2: Fix handling of arrays-of-structure. Thanks to Eric Anholt for
pointing this out.
v3: Minor comment change based on feedback from Ken.
Fixes piglit glsl-1.20/execution/uniform-initializer/fs-structure-array
and glsl-1.20/execution/uniform-initializer/vs-structure-array.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Add support for gen6, and don't turn it on if blending is
disabled. (fixes GPU hang), and note it in docs/GL3.txt
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The i965 driver needed this as well for hardware setup, so instead of
duplicating the logic, just save it off.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
While it doesn't have the same warning in the simulator as in gen7,
let's emit it out of paranoia. We wouldn't want our resolves of some
previous clear to get clamped to some current clamping value.
Suggested-by: pretty much everyone
When doing fast clears, a fulsim warning said that the batch was being
emitted without the viewport set up. While the fast clear pass I was
looking at doesn't use the clear value, the later resolves which also
didn't set up the vieport would trigger the same. It's not obvious
from the error message whether it meant "fast clear value gets clamped
to something you haven't defined" or "fast clear value doesn't get
clamped, and I saw it was out of the current (uninitialized) range,
and you probably wanted it clamped to that (uninitialized) range". Be
paranoid and assume the first case.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Having this enum separate caused us to need a bunch of helper
functions to translate to the op to be executed.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This required moving gen6_hiz_op, and I put it in intel_resolve_map.h
for the next commit.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The GLSL clear path doesn't need any buffer presence checks, since
those are already handled in the normal drawing path code.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Our understanding is that the 3D engine is supposed to be faster
anyway. We used to have more overhead in our tri clear path than we
do today, which would have led to this choice. But given that we
almost always see a depth clear along with a color clear, the path was
hardly exercised anyway.
Also, the color mask logic was broken in the presence of
GL_EXT_draw_buffers2's per-buffer colormask.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This logic is wasted on i965 when we want to just always do GLSL tri
clears.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Fixes lockups/asserts with depthstencil-render-miplevels tests and r600g.
Should also fix https://bugs.freedesktop.org/show_bug.cgi?id=50033
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Previously, when the environment variable INTEL_DEBUG=aub was set,
mesa would simply instruct DRM to start dumping data to an .aub file,
but we would not provide DRM with any information about the format of
the data in various buffers. As a result, a lot of the data in the
generate .aub file would be unannotated, making further data analysis
difficult.
This patch causes the entire contents of each batch buffer to be
annotated using the data in brw->state_batch_list (which was
previously used only to annotate the output of INTEL_DEBUG=bat). This
includes data that was allocated by brw_state_batch, such as binding
tables, surface and sampler states, depth/stencil state, and so on.
The new annotation mechanism requires DRM version 2.4.34.
Reviewed-by: Eric Anholt <eric@anholt.net>
When we are generating an AUB dump, we make a final call to
aub_dump_bmp() as the context is being destroyed, to ensure that any
rendering performed before the application exits can be seen during a
simulation run. However, we were doing this before flushing the batch
buffer; as a result simulation runs would not always see the effect of
all rendering commands.
This patch flushes the batch buffer just before making the final call
to aub_dump_bmp(), to ensure that all rendering is properly captured
in the final bitmap.
This is a long standing problem, that recently surfaced with the change
to enable perspective correct color interpolation.
A fix for all possible formats is left to the future.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
