In the past, we didn't have a good solution for combining scalar loads
with a variable index plus a constant offset. To handle that, we took
our load offset and rounded it down to the nearest vec4, loaded an
entire vec4, and trusted in the backend CSE pass to detect loads from
the same address and remove redundant ones.
These days, nir_opt_load_store_vectorize() does a good job of taking
those scalar loads and combining them into vector loads for us, so we
no longer need to do this trick. In fact, it can be better not to:
our offset need only be 4 byte (scalar) aligned, but we were making it
16 byte (vec4) aligned. So if you wanted to load an unaligned vec2,
we might actually load two vec4's (___X | Y___) instead of doing a
single load at the starting offset.
This should also reduce the work the backend CSE pass has to do,
since we just emit a single VARYING_PULL_CONSTANT_LOAD instead of 4.
shader-db results on Alchemist:
- No changes in SEND count or spills/fills
- Instructions: helped 95, hurt 100, +/- 1-3 instructions
- Cycles: helped 3411 hurt 1868, -0.01% (-0.28% in affected)
- SIMD32: gained 5, lost 3
fossil-db results on Alchemist:
- Instrs: 161381427 -> 161384130 (+0.00%); split: -0.00%, +0.00%
- Cycles: 14258305873 -> 14145884365 (-0.79%); split: -0.95%, +0.16%
- SIMD32: Gained 42, lost 26
- Totals from 56285 (8.63% of 652236) affected shaders:
- Instrs: 13318308 -> 13321011 (+0.02%); split: -0.01%, +0.03%
- Cycles: 7464985282 -> 7352563774 (-1.51%); split: -1.82%, +0.31%
From this we can see that we aren't doing more loads than before
and the change is pretty inconsequential, but it requires less
optimizing to produce similar results.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27568>
The Bspec also says, "The table below describes the SIMD modes which
are supported. SIMD32 and SIMD64 are used for media-type operations
only." Perhaps this commit should just add
if (devinfo->ver >= 20)
return 16;
instead.
v2: Use reg_unit in get_sampler_lowered_simd_width. Suggested by Sagar.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27305>
Otherwise the code generator will attempt to emit SIMD-lowered
QUAD_SWIZZLE instructions with an execution group not multiple of 8,
which is invalid on Xe2+.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27165>
On Xe2+, we don't build the SIMD8 shader so this check makes sure we
don't execute the uninitialized invocations.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26886>
Implements integer dot product lowering both with and without
DP4A. Implements half-float dot product lowering.
There are a couple FINISHME comments describing future optimizations.
v2: Add a brw_compiler::lower_dpas flag to track when the lowering
should be applied.
v3: Use is_null() instead of checking file != ARF. Suggested by Caio.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25994>
v2: Add brw_ir_performance.cpp and brw_fs_generator.cpp changes. Fix
overlapping register allocation (via has_source_and_destination_hazard). Fix
incorrect destination register file encoding.
v3: Prevent lower_regioning from trying to "fix" DPAS sources.
v4: Add instruction latency information for scheduling and perf
estimates.
v5: Remove all mention of DPASW. Suggested by Curro and Caio. Update
the comment in fs_inst::has_source_and_destination_hazard. Suggested
by Caio.
v6: Add some comments near the src2 calculation in
fs_inst::size_read. Suggested by Caio.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25994>
Extend the pre-existing dual-SIMD8 compilation path in
brw_compile_fs() to attempt quad-SIMD8 and dual-SIMD16 compiles.
Instead of building every possible dispatch mode and then picking one
based on cycle-count heuristics, this attempts to only build a single
multipolygon kernel -- The different mulipolygon dispatch modes are
tried in the expected order of decreasing performance (quad-SIMD8,
dual-SIMD16 then dual-SIMD8), the first one that successfully compiles
without spills is taken as a simple heuristic, and no further
multipolygon builds are attempted.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
This is needed because the information stored on the ATTR file for
multipolygon fragment shaders isn't stored as a contiguous sequence in
the GRF, instead the ATTR source may be lowered by assign_urb_setup()
to use a <16;8,0> region, which reads 4 SIMD16 GRFs for a SIMD32
instruction, even though the result of fs_inst::size_read() is
expected to be 2 GRFs. Special case ATTR sources for multipolygon PS
shaders to calculate the number of physical GRFs that will actually be
read by the instruction after lowering, based on the number of
polygons processed by the instruction.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
This is based on a previous patch by Marcin Ślusarz addressing the
same issue, though it's largely rewritten, simplified and includes
additional fixes.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
This fixes a number of assumptions made by the multipolygon input
attribute handling code from assign_urb_setup() so it also works on
Xe2+, which has additional multipolygon dispatch modes (like SIMD4x8
and SIMD2x16) and uses a different more compact representation of the
plane parameters.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
The interpolation deltas of PS inputs now show up as a 12B vec3 (A0,
A1-A0, A2-A0) in the ATTR file, instead of the previously used 16B
format with an unused component.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
The X and Y barycentric vectors are no longer interleaved in SIMD8
chunks (yay), so this is mostly a matter of disabling the
lower_barycentrics() pass and switching to a simpler implementation of
fetch_barycentric_reg() that simply calls fetch_payload_reg() instead
of the SIMD8 shuffling we had to do in previous generations.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
This extends fetch_payload_reg() to support fetching vector registers
like barycentrics stored on the payload as a contiguous sequence of
SIMD-wide vectors. In the SIMD32 case, both halves of the SIMD16
vector registers specified as regs[0] and regs[1] are zipped to
construct a single SIMD32-wide vector.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
Note from Caio: proper handling of brw_sample_mask_reg
will appear in later patches.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
These restrictions don't seem to be applicable anymore, and limiting
to SIMD8 wouldn't work since we're no longer building shaders with
that dispatch width.
[ Francisco: This one-liner change was squashed by Rohan Garg into a
previous version of my patch "Stop building SIMD8 programs", but it
makes more sense as a separate commit -- Formatted as a separate
patch. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26605>
