This just copies what the LUMINANCE_ALPHA bits do.
Fixes piglit tests on softpipe complaining about missing unpack.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit fef395c0c3)
GL_UNPACK_LSB_FIRST only applies to bitmap data, not glReadPixels.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 343100d1fc)
Fixes piglit ARB_copy_buffer-overlap, on swrast, which previously
assertion failed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 531e44415b)
Those IDs are used by Bromolow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit a45247fb1b)
Conflicts:
include/pci_ids/i965_pci_ids.h
Noticed by clang:
brw_wm_surface_state.c:330:30: warning: initializer overrides prior
initialization of this subobject [-Winitializer-overrides]
[MESA_FORMAT_Z24_S8] = 0,
^
brw_wm_surface_state.c:326:30: note: previous initialization is here
[MESA_FORMAT_Z24_S8] = 0,
^
No functionality change, since the array is declared static so
it was zero-initialized by default.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit dd32df3829)
Fix wrong cube/3D texture layout for the tailing levels whose width or
height is smaller than the align unit.
From 965 B-spec http://intellinuxgraphics.org/VOL_1_graphics_core.pdf at
page 135:
All of the LOD=0 q-planes are stacked vertically, then below that,
the LOD=1 qplanes are stacked two-wide, then the LOD=2 qplanes are
stacked four-wide below that, and so on.
Thus we should always inrease pack_x_nr, which results to the pitch of LODn
may greater than the pitch of LOD0. So we should refactor mt->total_width
when needed.
This would fix the following webgl test case on all gen4 platforms:
conformance/textures/texture-size-cube-maps.html
NOTE: This is a candidate for stable release branches.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit f939776cb2)
The code is no longer relevant.
Note: this driver is probably broken now. There's no implementation
of ctx->Driver.Map/UnmapRenderbuffer().
(cherry picked from commit 4a1c660599)
Instruction attributes like WriteALUResult and ALUResultCompare
were being discarded during the some of the local transformations.
This fixes the following piglit tests:
glsl1-inequality (vec2, pass)
loopfunc
fs-any-bvec2-using-if
fs-op-ne-bvec2-bvec2-using-if
fs-op-ne-ivec2-ivec2-using-if
fs-op-ne-mat2-mat2-using-if
fs-op-ne-vec2-vec2-using-if
fs-op-ne-mat2x3-mat2x3-using-if
fs-op-ne-mat2x4-mat2x4-using-if
https://bugs.freedesktop.org/show_bug.cgi?id=45921
(cherry-picked from commit 73249239cf)
The loop registers weren't being cleared, so any shader that was
executed after a shader containing loops was at risk of having a loop
randomly inserted into it.
This fixes over one hundred piglit tests, although these test
only failed during full piglit runs and would pass if
run individually. The exact number of piglit tests that this patch
fixes will vary depending on the version of piglit and the order the
tests are run.
(cherry-picked from commit 4a269a8dc0)
There's a serious trap for drivers: RenderTexture() does not indicate
that the texture is currently bound to the draw buffer, despite
FinishRenderTexture() signaling that the texture is just now being
unbound from the draw buffer.
We were acting as if RenderTexture() *was* the start of rendering and
that we could make texturing incoherent with the current contents of
the renderbuffer. This caused intel oglconform sRGB
Mipmap.1D_textures to fail, because we got a call to TexImage() and
thus RenderTexture() on a texture bound to a framebuffer that wasn't
the draw buffer, so we skipped validating the new image into the
texture object used for rendering.
We can't (easily) make RenderTexture() indicate the start of drawing,
because both our driver and gallium are using it as the moment to set
up the renderbuffer wrapper used for things like MapRenderbuffer().
Instead, postpone the setup of the workaround render target miptree
until update_renderbuffer time, so that we no longer need to skip
validation of miptrees used as render targets. As a bonus, this
should make GL_NV_texture_barrier possible.
(This also fixes a regression in the gen4 small-mipmap rendering since
3b38b33c16, which switched
set_draw_offset from image->mt to irb->mt but didn't move the irb->mt
replacement up before set_draw_offset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44961
NOTE: This is a candidate for the 8.0 branch.
From the GLSL 1.30 spec:
The discard keyword is only allowed within fragment shaders. It
can be used within a fragment shader to abandon the operation on
the current fragment. This keyword causes the fragment to be
discarded and no updates to any buffers will occur. Control flow
exits the shader, and subsequent implicit or explicit derivatives
are undefined when this control flow is non-uniform (meaning
different fragments within the primitive take different control
paths).
v2: Don't emit the final HALT if no other HALTs were emitted.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Noticed by clang:
egl_st.c:57:50: warning: field precision should have type 'int',
but argument has type 'size_t' (aka 'unsigned long') [-Wformat]
ret = util_snprintf(path, sizeof(path), "%.*s/%s" UTIL_DL_EXT,
~~^~
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 2bb91274e2)
C still treats array arguments exactly like pointer arguments.
By sheer coincidence, this still worked fine on 64-bit
machines where 2 * sizeof(float) == sizeof(void*), but not
on 32-bit.
Noticed by clang:
text.c:76:51: warning: sizeof on array function parameter will
return size of 'const VGfloat *' (aka 'const float *') instead of
'const VGfloat [2]' [-Wsizeof-array-argument]
memcpy(glyph->glyph_origin, glyphOrigin, sizeof(glyphOrigin));
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6a491b5728)
Noticed by clang:
eglimage.c:48:28: warning: argument to 'sizeof' in 'memset' call is
the same expression as the destination; did you mean to dereference
it? [-Wsizeof-pointer-memaccess]
memset(attrs, 0, sizeof(attrs));
~~~~~ ^~~~~
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 071501a681)
Most of the 256 values in the 'generic_to_slot' table were supposed to
be initialized with the default value 0xff, but were left at zero
(from CALLOC_STRUCT()) instead.
Noticed by clang:
u_linkage.h:60:31: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination;
did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess]
memset(table, 0xff, sizeof(table));
~~~~~ ^~~~~
Also fix a signed/unsigned comparison and a comment typo here.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 520521e380)
container_of() can legally return anything, even invalid addresses
that cause segfaults, when 'sample' is an uninitialized pointer.
Bug exposed by clang.
NOTE: This is a candidate for the 8.0 branch.
(cherry picked from commit ccff749712)
A little analysis shows that the worst-case value for "nr" is 17:
- base_mrf = 2 ... 2
- header present (say gen == 5) ... 4
- aa_dest_stencil_reg (stencil test) ... 5
- SIMD16 mode: += 4 * reg_width ... 13
- source_depth_to_render_target ... 15
- dest_depth_reg ... 17
This resulted in us setting base_mrf to 2 and mlen to 15. In other
words, we'd try to use m2..m16. But m16 doesn't exist pre-Gen6. Also,
the instruction scheduler data structures use arrays of size 16, so this
would cause us to access them out of bounds.
While the debugger system routine may need m0 and m1, we don't use it
today, so the simplest solution is just to move base_mrf back to 1.
That way, our worst case message fits in m1..m15, which is legal.
An alternative would be to fail on SIMD16 in this case, but that seems
a bit unfortunate if there's no real need to reserve m0 and m1.
Fixes new piglit test shaders/depth-test-and-write on Ironlake,
as well as gzdoom.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48218
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit aa429ea73c0931d5cfa2c263fe005ead8dc32ddf)
The __glapi_gentable_set_remaining_noop() routine treats the _glapi_struct
as an array of _glapi_get_dispatch_table_size() pointers, so we have to
allocate _glapi_get_dispatch_table_size()*sizeof(void*) bytes rather
than sizeof(struct _glapi_struct) bytes.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit 8d09f4d0cc)
Accelerates a few glReadPixels cases for WebGL.
See https://bugs.freedesktop.org/show_bug.cgi?id=48545
v2: Per Jose, use bit twiddling for the swizzle case instead of ubyte
arrays (it's about 44% faster).
Note: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit a5e95a419e)
When SPRITE_POINT_ENABLE bit is set, the texture coord would be
replaced, and this is only needed when we called something like
glTexEnvi(GL_POINT_SPRITE, GL_COORD_REPLACE, GL_TRUE).
And more, we currently handle varying inputs as texture coord,
we would be careful when setting this bit and set it just when
needed, or you will find the value of varying input is not right
and changed.
Thus we do set SPRITE_POINT_ENABLE bit only when all enabled tex
coord units need do CoordReplace. Or fallback is needed to make
sure the rendering is right.
With handling the bit setup at i915_update_sprite_point_enable(),
we don't need the relative code at i915Enable then.
This patch would _really_ fix the webglc point-size.html test case and
of course, not regress piglit point-sprite and glean-pointSprite
testcase.
NOTE: This is a candidate for stable release branches.
v2: fallback just when all enabled tex coord units need do
CoordReplace (Eric)
v3: move the sprite point validate code at I915InvalidateState (Eric)
v4: sprite point enable bit update based on _NEW_PROGRAM, too
add relative _NEW-state comments to show what state is being used(Eric)
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit c653287549)
We already program all the sampler state correctly, we just didn't give
the GPU a pointer to it for the VS stage. Thus, any texturing other
than texelFetch() wouldn't work.
Fixes piglit test vs-textureLod-miplevels and 99 of oglconform's
glsl-bif-tex subtests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 2a80a1e2a7)
The build was broken by the line below, added in commit 4f82fed4.
s_expression.cpp:26: #include <limits>
Mesa's half of the fix is to add 'external/astl/include' to the include
path. The other half of the fix requires implementing
numeric_limits<float>::infinity() in astl, for which I have patches
submitted upstream for review.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 5497cc428f)
There's even a comment in the code containing the right swizzling
computations!
Previously this has not been noticed because we need to manually
enabled swizzling on snb/ivb (kernel 3.4 will do that) and we
don't use the separate stencil on ilk (where the bios enables
swizzling). This fixes
piglit ./bin/fbo-stencil readpixels GL_DEPTH32F_STENCIL8 -auto
on recent drm-intel-next kernels.
Also remove the comment about ivb, it's stale now.
Swizzling detection is done by allocating a temporary x-tiled
buffer object. Unfortunately kernels before v3.2 lie on snb/ivb
because they claim that swizzling is enable, but it isn't. The
kernel commit that fixes this for backport to pre-v3.2 is
commit acc83eb5a1e0ae7dbbf89ca2a1a943ade224bb84
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 12 20:49:16 2011 +0200
drm/i915: fix swizzling on gen6+
But if the kernel doesn't lie, this now works on swizzling and
not swizzling machines.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f172eae8b2)
This checks for advertised LLC support by the GPU instead of relying on
the GPU generation for detection.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit 84e5f1c635)
Rely on libdrm HAS_LLC parameter to verify if hardware supports it. In
case the libdrm version does not supports this check, fallback to older
way of detecting it which assumed that GPUs newer than GEN6 have it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit 7def293204)
Kernels prior to 271d81b84171d84723357ae6d172ec16b0d8139c (March 2011)
don't support relocations outside of the target buffer object. Rather
than guarding this with a I915_PARAM_HAS_RELAXED_DELTA check, just
smash the bound to 0xfffff001 like we do on Ironlake.
This effectively gives us no upper bound check, just like we did prior
to commit 271d81b84171d84723357ae6d172ec16b0d8139c.
Daniel Vetter would also like to mention that this relies on the guard
page at the end of the GTT.
Fixes a regression since 271d81b84171d84723357ae6d172ec16b0d8139c.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46766
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit b2ace06cbb)
