Only the first 'nr_cbufs' color buffers in the pipe_framebuffer_state are
valid. The rest of the color buffer pointers might be unitialized.
Fixes a regression in the piglit fbo-srgb-blit test since changes in the
gallium blitter code.
NOTE: This is a candidate for the 9.0 branch (just to be safe).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 60a9390978)
To validate this code, I ran piglit -t vs quick.tests with the "go spill
everything" debugging code enabled. There was only one regression:
glsl-vs-unroll-explosion simply ran out of registers. This should be
fine in the real world, since no one actually spills every single
register.
NOTE: This is a candidate for the 9.0 branch. Even if it proves to have
bugs, it's likely better than simply failing to compile.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9237f0ea8d)
move_grf_array_access_to_scratch() calculates scratch buffer offsets in
bytes. However, emit_scratch_read/write() expects the base_offset
parameter to be measured in OWords.
As a result, a shader using a scratch read/write offset greater than
zero (in practice, a shader containing more than one variable in
scratch) would use too large an offset, frequently exceeding the
available scratch space.
This patch corrects the mismatch by removing spurious conversion from
OWords to bytes in move_grf_array_access_to_scratch().
This is based on a patch by Paul Berry.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 46e529672b)
Since wl_display_dispatch_queue() returns the number of processed events
or -1 on error, only cancel the roundtrip if an -1 is returned.
This also fixes a potential memory corruption bug happening when the
roundtrip does an early return and the callback later writes to the then
out of scope stack allocated `done' parameter.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
When a client frame callback is executed and the client starts rendering
again, the egl event queue might not have been dispatched so that the
buffer release event for the previous frame hasn't been processed. In
that case a third buffer is allocated, even though it would be possible
to reuse the buffer that was just released.
The wl_display_dispatch_queue_pending() entry point is available from
wayland-client 1.0.2, so require that in configure.ac. Also, just
let the pkg-config macro throw its own error, which will show what version
we were looking for and failed to find.
Note: This is a candidate for stable branches.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Commit ca3ed3e024 fixed the problem where
eglMakeCurrent would trigger a getbuffer callback that then breaks the
following wl_egl_window_resize() call. However, we still need to
invalidate buffers in eglSwapBuffers, since in wayland we always swap
buffers, so the dri driver needs to come out and ask us for the next buffer
after each swapbuffer.
Note: this is a candidate for stable branches.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
We used to invalidate the drawable after a call to eglSwapBuffers(),
so that a wl_egl_window_resize() would take effect for the next frame.
However, that leads to calling dri2_get_buffers() when eglMakeCurrent()
is called with the current context and surface, and a later call to
wl_egl_window_resize() would not take effect until the next buffer
swap.
Instead, add a callback from wl_egl_window_resize() back to the wayland
egl platform, and invalidate the drawable only when it is resized.
This solves a bug on wayland clients when going back to windowed mode
from fullscreen when clicking a pop up menu, where the window size
after this would be the fullscreen size.
Note: this is a candidate for stable branches.
CC: wayland-devel@lists.freedesktop.org
i.e. we have to allocate a temporary tiled resource if dst isn't tiled.
This fixes hardlocks on r6xx-r7xx, though using a linear resource is forbidden
on later asics as well.
NOTE: This is a candidate for the stable branches.
(cherry picked from commit 9c6410e5c3)
Conflicts:
src/gallium/drivers/r600/r600_blit.c
src/gallium/drivers/r600/r600_texture.c
The burst was incorrectly used, because ELEM_SIZE was always 0.
I don't know if the burst works, because I don't know of any test
which uses it.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6a2ec765bd)
Conflicts:
src/gallium/drivers/r600/r600_shader.c
The read can remain disabled if the src alpha factor needs it because
the result would still be zero.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57984
NOTE: This is a candidate for stable release branches.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit ff5a9868c8)
While developing cube map array support I found that we didn't
support this properly, also piglit didn't test for it at all.
I've submitted a test to piglit to check for this, and this
fixes explicit lod and lod bias with cube maps.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 037b4f8038)
This fixes graphics corruption in the case where the DISCARD_RANGE flag
is used to map a buffer.
NOTE: This is a candidate for the stable branches.
(cherry picked from commit cff4c948ed)
Array textures were broken.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e7dde5c8fb)
Array textures were broken.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6dd839f23a)
It was pretty broken with array textures, where the array size (height or
depth depending on the target) shouldn't be magnified.
The guessing also doesn't fail with 1D and cube textures.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c06258dd02)
Conflicts:
src/mesa/state_tracker/st_cb_texture.c
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 985f2aec4a)
Conflicts:
src/mesa/main/texstorage.c
MaxLog2 led to bugs, because it didn't work well with 1D and 3D textures.
NOTE: This is a candidate for the stable branches.
v2: correct the comment at MaxNumlevels
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 8111342e81)
Conflicts:
src/mesa/main/teximage.h
The functions were broken, because they converted ints to floats.
Now we can finally advertise OpenGL 3.0. ;)
In this commit, the vbo module also tracks the type for each attrib
in addition to the size. It can be one of FLOAT, INT, UNSIGNED_INT.
The little ugliness is the vertex attribs are declared as floats even though
there may be integer values. The code just copies integer values into them
without any conversion.
This implementation passes the glVertexAttribI piglit test which I am going
to commit in piglit soon. The test covers vertex arrays, immediate mode and
display lists.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: cosmetic changes as suggested by Brian
(cherry picked from commit acf438f537)
This is a regression since b3921e1f53.
The array stores VS outputs, not FS inputs.
Now llvmpipe can do 32 varyings too.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 183e122bdf)
We're starting to get apps utilizing more than 16 varyings and
most current hardware supports 32 anyway.
Tested with r600g.
swrast, softpipe and llvmpipe still advertise 16 varyings.
This fixes a WebGL crash after launching this demo:
https://developer.mozilla.org/en-US/demos/detail/falling-cubes
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54402
NOTE: This is a candidate for the stable branches.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b3921e1f53)
Conflicts:
src/mesa/main/context.c
And the clear color too, though that may be an issue only with GL_RGB if it's
actually RGBA in the driver.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: The types of st_translate_color parameters were changed to gl_color_union
and pipe_color_union as per Brian's comment.
(cherry picked from commit 2bbd307fa6)
For precise lts support I had to do some magic with the library names, which works fine
as long as the libraries from pkg-config are used.
The parts with src/gallium/targets/va-*/Makefile will not apply on the master branch,
but do apply to the 9.0 branch.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 4f0537e645)
fixes errors ./configure and make was complaining about
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 8a9f0fdeab)
fixes errors ./configure was complaining about
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit bc08f26485)
fixes errors ./configure was complaining about
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit a0a90ea920)
If a frame callback is not destroyed when destroying a surface, its
handler function will be invoked if the surface was destroyed after the
callback was requested but before it was invoked, causing a write on
free:ed memory.
This can happen if eglDestroySurface() is called shortly after
eglSwapBuffers().
Note: This is a candidate for stable branches.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit a3b6b2d305)
Global initializers using the ?: operator with at least one non-constant
operand generate ir_if statements. For example,
float foo = some_boolean ? 0.0 : 1.0;
becomes:
(declare (temporary) float conditional_tmp)
(if (var_ref some_boolean)
((assign (x) (var_ref conditional_tmp) (constant float (0.0))))
((assign (x) (var_ref conditional_tmp) (constant float (1.0)))))
This pattern is necessary because the second or third arguments could be
function calls, which create statements (not expressions).
The linker moves these global initializers into the main() function.
However, it incorrectly had an assertion that global initializer
statements were only assignments, calls, or temporary variable
declarations. As demonstrated above, they can be if statements too.
Other than the assertion, everything works fine. So remove it.
Fixes new Piglit test condition-08.vert, as well as an upcoming
game that will be released on Steam.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b45a68eebf)
Previously, if the server didn't send a GLX_FRAMEBUFFER_SRGB_CAPABLE_EXT
tag, it would still be set to GLX_DONT_CARE (which is -1). Set it to
GL_FALSE instead.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Maciej Wieczorek <maciej.t.wieczorek@intel.com>
(cherry picked from commit 7b0f912e70)
This is a squash of the following two commits:
ralloc: Annotate printf functions with PRINTFLIKE(...)
Catches problems such as (in the gles3 branch)
glcpp-parse.y: In function '_glcpp_parser_handle_version_declaration':
glcpp-parse.y:1990:39: warning: format '%lli' expects argument of type
'long long int', but argument 4 has type 'int' [-Wformat]
As a side-effect, remove ralloc.c's likely/unlikely macros and just use
the ones from main/compiler.h.
NOTE: This is a candidate for the release branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 41b14d1251)
and
src/glsl/tests/Makefile.am: Specify -I... in AM_CPPFLAGS
When specifying per-target CFLAGS (e.g., ralloc_test_CFLAGS) AM_CFLAGS
are not used. AM_CPPFLAGS should be used for includes anyway.
Fixes a build problem since 41b14d125:
CC ralloc_test-ralloc.o
In file included from ../../../src/glsl/ralloc.c:42:0:
../../../src/glsl/ralloc.h:57:27: fatal error: main/compiler.h: No such file or directory
Acked-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit 67f1e7bf5f)
Fixes the problem where configure from the tarball would report missing
files:
$ ./configure
configure: error: cannot find install-sh, install.sh, or shtool in bin
NOTE: This is a candidate for the 9.0 branch.
(cherry picked from commit ec57fbbc72)
