When switching between framebuffers with and without TS, the TS state
needs to be flushed to the command stream even if the derived state
isn't changed.
Fixes: 4ee7c2c284 ("etnaviv: enable TS, but disable autodisable")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 29a0ea699a)
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e6abc613e2)
Portal 2 appears to bind RGBA8888_UNORM textures to a sampler2DShadow,
and calls shadow2D() on it. This causes undefined behavior in OpenGL.
Unfortunately, our sampler appears to hang in this scenario, which is
not acceptable. Just give them a null surface instead, which returns
all zeroes.
Fixes GPU hangs in Portal 2 on Kabylake.
Huge thanks to Jason Ekstrand for noticing this crazy behavior while
sifting through crash dumps.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104487
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 3e18c53e59)
Some tess shaders were doing MOVA_INT _, c0.x on cayman, and then
hitting an assert in sb_bc_finalize.cpp:translate_kcache.
This makes sure the toplevel kcache tracker gets updated,
and the clause gets fixed up.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 68b976bd91)
This commit unifies the CCS_E and CCS_D cases. This should fix a couple
of subtle issues. One is that when you use INTEL_DEBUG=norbc to disable
CCS_E, we don't get the sRGB blending workaround. By unifying the code,
we give CCS_D that workaround as well.
The second issue fixed by this refactor is that the blending workaround
was appears to be enabled on all gens but really only applies on gen9.
Due to a happy accident in the way code was laid out, it was only
getting enabled on gen9: gen8 and earlier don't support non-zero-one
clear colors, and gen10 supports sRGB for CCS_E so it got caught in the
format_ccs_e_compat_with_miptree case. This refactor moves it above the
format_ccs_e_compat_with_miptree case so it's an explicit early exit and
makes it explicitly only on gen9.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 361e1df1ed)
This reverts commit ee57b15ec7, "i965:
Disable regular fast-clears (CCS_D) on gen9+". How taht we've fixed the
issue with too many different aux usages in the render cache, it should
be safe to re-enable CCS_D for sRGB.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104163
Tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f79bb2e651)
[Emil Velikov: resolve trivial conflicts - gen10 is missing in branch]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_meta_util.c
This lets us perform render cache flushes whenever a surface goes from
being used with one aux+format to a different aux+format.
This is the "proper" fix for https://bugs.freedesktop.org/102435.
ee57b15ec7 which was really just a partial
revert of 3e57e9494c was just a hack to
get rid of a hang in a bunch of Valve games. This solves the actual
problem responsible for the hang and lets us enable CCS_E once again.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102435
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d84275b884)
Previously, we just had one hash set for tracking depth and render
caches called brw_context::render_cache. This is less than ideal
because the depth and render caches are separate and we can't track
moves between the depth and the render caches. This limitation led
to some unnecessary flushing around the depth cache. There are cases
(mostly with BLORP) where we can end up touching a depth or stencil
buffer through the render cache. To guard against this, blorp would
unconditionally do a render_cache_set_check_flush on it's destination
which meant that if you did any rendering (including a BLORP operation)
to a given surface and then used it as a blorp destination, you would
end up flushing it out of the render cache before rendering into it.
Things get worse when you dig into the depth/stencil state code for
regular GL draw calls. Because we may end up rendering to a depth
or stencil buffer via BLORP, we did a render_cache_set_check_flush on
all depth and stencil buffers in brw_emit_depthbuffer to ensure that
they got flushed out of the render cache prior to using them for depth
or stencil testing. However, because we also need to track dirtiness
for depth and stencil so that we can implement depth and stencil
texturing correctly, we were adding all depth and stencil buffers to the
render cache set in brw_postdraw_set_buffers_need_resolve. This meant
that, if anything caused 3DSTATE_DEPTH_BUFFER to get re-emitted
(currently _NEW_BUFFERS, BRW_NEW_BATCH, and BRW_NEW_BLORP), we would
almost always do a full pipeline stall and render/depth cache flush.
The root cause of both of these problems is that we can't tell the
difference between the render and depth caches in our tracking. This
commit splits our cache tracking into two sets, one for render and one
for depth, and properly handles transitioning between the two. We still
flush all the caches whenever anything needs to be flushed. The idea is
that if we're going to take the hit of a flush and stall, we may as well
flush everything in the hopes that we can avoid a flush by something
else later.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fb0e9b5197)
Right now we just always flush the destination for render and aren't
particularly careful about depth or stencil. Soon, flush_for_render
isn't going to do the same thing as flush_for_depth and we may be doing
a good deal less depth flushing so we should be a bit more precise.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d6d0ac95d5)
In theory, this will let us track the depth and render caches
separately. Right now, they're just wrappers around
brw_render_cache_set_*
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 4a09070295)
This makes sure we flush things out of other caches prior to using a
surface through the render cache. Currently, this is a no-op because GL
won't let you bind anything other than a color surface as color so it
should never end up in the depth cache. However, this does complete the
flush/add_bo pair for regular drawing which will be required for the
next commit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 622786c20c)
Without this initialization the temp registers used in tgsi_declaration
may used random indices, and this may result in failing translation from TGSI
with an error message "GPR limit exceeded", because the random index is greater
then the allowed limit implying that the shader uses more temporary registers then
available.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5d6470d26b)
Respect the std430 rules for determining offset and size of struct
members when using a std430 buffer. std140 rules lead to wrong buffer
offsets in that case.
Fixes my test case attached in Bugzilla. No piglit changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104492
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 7e025def6d)
If alpha-to-coverage is enabled, we have to compute alpha
even if color writes are disabled.
Signed-off-by: Józef Kucia <joseph.kucia@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit f222cf3c6d)
Upon reception of an event that lowered the number of active back buffers,
the code would immediately try to free all back buffers with an id equal to or
higher than the new number of active back buffers.
However, that could lead to an active or to-be-active back buffer being freed,
since the old number of back buffers was used when obtaining an idle back
buffer for use.
This lead to crashes when lowering the number of active back buffers by
transitioning from page-flipping to non-page-flipping presents.
Fix this by computing the number of active back buffers only when trying to
obtain a new back buffer.
Fixes: 15e208c4cc ("loader/dri3: Don't accidently free buffer holding new back content")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104214
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Andriy.Khulap <andriy.khulap@globallogic.com>
Tested-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
(cherry picked from commit 897c54d522)
anv_extensions usage from anv_icd was bringing the unwanted dependency
of mako templates for the latter. We don't want that since it will
force the dependency even for distributable tarballs which was not
needed until now.
Jason suggested this approach.
v2: Patch simplification (Jason).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104551
Fixes: 0ab04ba979 ("anv: Use python to generate ICD json files")
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit a1901d092c)
If they were promoted from inputs/outputs, they could have a
non-zero value left over, which messed with our store handling.
Fixes: 06f05040eb "radv: Link shaders."
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 67e09c8b45)
These are just shaders reads, so we need to invalidate L1.
Fixes: 6dbb0eaccc "radv: handle subpass cache flushes"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit f2c9f13ec2)
When rasterization is disabled we can have that few.
Fixes: 76603aa90b "radv: Drop the default viewport when 0 viewports are given."
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1c78e4f053)
Seems like users are actually hitting 0xFFFFFFFF actually making
things broken for them, and the mad max regression is fixed, so
lets put this in once more.
v2: Use 0xf for depth-only htile. (Dave)
Fixes: af2844116f "radv: Revert HTILE reset word to 0xFFFFFFFF."
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5158603182)
This reverts commit 5951578043.
The mentioned commit causes a hang in DoW3 on Vega.
Fixes: 5951578043 "radv/gfx9: fix block compression texture views."
Acked-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 516a80b579)
This should fix:
dEQP-VK.pipeline.sampler.view_type.*.format.b4g4r4a4_unorm_pack16.address_modes.all_mode_clamp_to_border_opaque_black
and a few others in that area.
Fixes: b11c4a5546 (radv: add texture descriptor/fmask/cmask support for GFX9)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a4c23ce1b6)
amdvlk is probably more subtle than this but it never uses
the inv cb/db variants, we fail some CTS tests without this.
Fixes:
dEQP-VK.renderpass.dedicated_allocation.formats.d32_sfloat_s8_uint.input*.
Fixes: c2fbeb7ca0 (radv: add GFX9 cache flushing support.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (for now :-)
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 868377ab33)
This ports a fix from amdvlk, to fix the sizing for mip levels
when block compressed images are viewed using uncompressed views.
Fixes:
dEQP-VK.image.texel_view_compatible.graphic.extended*bc*
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5951578043)
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 420627e6e7)
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 09612a62e1)
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit d08f267814)
It's legal to a pipeline stat query on a compute queue,
but we'd emit the wrong packet here. This should fix it to emit
the correct packet.
Noticed while inspecting the mpv hang.
Fixes: ad61eac250 (radv: factor out eop event writing code. (v2))
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit ec1edd0fd2)
The event emission wasn't sending the correct packet for gfx8 compute
queues, which explains why it works on vega fine.
This fixes the mpv vulkan hang.
Fixes: ad61eac250 (radv: factor out eop event writing code. (v2))
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 38e4467e99)
HW resolve does not support it either.
Fixes: 2a04f5481d "radv/meta: select resolve paths"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a636208ace)
Framebuffer is from 0,0, not (dst.x, dst.y).
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit da192b50b2)
The position start at (dst.x, dst.y), so if we want the source to
start at (src.x, src.y), we have to offset by (src.x-dst.x,src.y-dst.y).
Haven't tested that this fixed anything yet, but found by inspection.
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 73279da41d)
the samples_identical instruction returns 0 if they are differet, so
we have to do the extra work if the result is 0, not if it is != 0.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c39947ce30)
fixes: The commit addresses earlier commits 40a01c9a0e and 8d745abc00
which did not land in branch.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
From Vulkan spec:
"descriptorCount is the number of descriptors contained in the binding,
accessed in a shader as an array. If descriptorCount is zero this
binding entry is reserved and the resource must not be accessed from
any stage via this binding within any pipeline using the set layout."
Fixes:
dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e63adf8b1e)
After executing a secondary command buffer, we need to update certain
state on the primary command buffer to reflect changes by the secondary.
Otherwise subsequent commands may not have the correct state set.
This fixes various issues (rendering errors, GPU hangs) seen after
executing secondary command buffers in some cases.
v2 (Jason Ekstrand):
- Reset to invalid values instead of pulling from the secondary
- Change the comment to be more descriptive
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 4fd85617c1)
intel_batchbuffer_emit_float is dead code, it should go.
intel_batchbuffer_emit_dword only had one user, which had bungled using
them by forgetting to call intel_batchbuffer_require_space first. So it
seems wise to delete these unsafe helpers.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit be144e251c)
