* src/NetworkManager.c: Set the umask to 0022 when daemonizing, in case
root has a wacky default of its own (or, more common, a user has a
bad umask and uses su/sudo to restart NetworkManager). Anything other
than 0022 does not do what we want with, for example, resolv.conf. This
problem is amplified by our judicious use of fopen(), which uses mode
0666 -- implying that the only way to get the permissions we want is
with a umask of 0022.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1719 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/libnm_glib/libnm_glib.c
- Don't suck CPU when dbus isn't around by scheduling idle handlers
to reconnect; instead wait a bit more with each reconnect attempt
up to a max of one minute.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1718 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/passphrase-dialog.c (update_button_cb): Get the SSID of
the WirelessNetwork structure using the proper function instead of
just casting it directly to (const char *) (gnome.org #336991)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1717 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerSuSE.c: Respect the variable
dhcp:DHCLIENT_MODIFY_RESOLV_CONF, not
config:MODIFY_RESOLV_CONF_DYNAMICALLY, when deciding whether or not
to dynamically update /etc/resolv.conf.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1716 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Timo Hoenig;
* tests/nm-online.c: Print pretty status indicator as timeout winds
down. Also fix possible race between DBUS startup and failure
return.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1714 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* tests/nm-online.c: New file. Simple utility that returns exit status
noting whether the connection is offline or online. If offline on
start, it waits 60 seconds (or a command-line given value) for an
online signal. If it times out, it again returns offline. This is
useful for scripts that want to wait for network connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1706 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-ap-security-wep.c: Bug fix: We stopped setting the
key mode (the authentication algorithm), e.g. open or shared, when we
moved to using wpa_supplicant. wpa_supplicant defaults to open, so
only shared was broken. If the user specified a shared key, set it
explicitly, otherwise let wpa_supplicant go with the default.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1705 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Commit the async scanning patch
* src/nm-device-802-11-wireless.c
- get rid of scan_mutex
- (wireless_event_helper): act on wireless scan events
- (real_start): schedule a pending scan
- (link_to_specific_ap): fake the link to the AP during a scan
- (nm_device_802_11_wireless_update_signal_strength): ignore signal
strength during scans
- (nm_device_get_frequency, nm_device_set_frequency, nm_device_get_bitrate,
nm_device_set_bitrate): unused with new scanning code, disable
- (nm_device_wireless_schedule_scan): removed
- (nm_device_wireless_process_scan_results): renamed to convert_scan_results()
- (request_and_convert_scan_results): new function; retrieve scan
results from the driver and schedule the processing function
- (scan_results_timeout): timeout triggered when card doesn't send
a scan results wireless event during a certain interval
- (schedule_scan_results_timeout): new function; schedule the scan
results timeout
- (cancel_scan_results_timeout): new function; cancel the scan
results timeout
- (nm_device_802_11_wireless_scan): if wpa_supplicant is running, ask it
to do the scanning. Otherwise, just request a scan but don't
grab results here; instead schedule a timeout for scan results and
let netlink notify us of scan completion events
- (nm_device_wireless_schedule_scan): new function; schedule a wireless scan
- (cancel_pending_scan): new function; cancel a pending wireless scan
- (supplicant_status_cb): ignore disconnect events while scanning
- (supplicant_exec): wait a bit longer for the supplicant to start up
- (nm_device_802_11_wireless_dispose): cancel pending scans and results
timeouts
- (get_scan_results): removed; folded into request_and_convert_scan_results()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1703 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix bug where hidden ESSID's would not show up in the applet, even
if NMI provided a BSSID -> ESSID mapping from Gconf. This occurred
because nm_policy_device_list_update_from_allowed_list() would merge
the data, putting a name to the hidden networks, but never notify NMI
of the changes. Simple fix is to invoke the function
nm_dbus_signal_wireless_network_change() if we make a mapping.
* src/NetworkManagerAPList.c: Call the function
nm_dbus_signal_wireless_network_change() if we made a successful
BSSID to ESSID mapping, notifying the applet of the "new" network.
* src/NetworkManagerAPList.h: Update the prototypes for both
nm_ap_list_copy_essids_by_address() and
nm_ap_list_copy_one_essid_by_address().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1700 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-properties.c: Satisfy TODO: Ensure that
only one copy of nm-vpn-properties is running at a time via the 'ol
X selection trick. This prevents the user from opening two "VPN
Connections" windows from within the applet, which leads to mass
hysteria.
* clipboard.c: New file, implementing simple X selection logic.
* clipboard.h: New file.
* gnome/vpn-properties/Makefile.am: Add clipboard.{c,h}
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1695 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* properties/nm-openvpn-dialog.glade: If the dialog won't let the user
type in the file entry GtkEntries, then don't mark them editable.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1692 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* properties/nm-openvpn.c: Report error if writing out of exported
configuration fails. The silent treatment might work for me and my
wife, but not for failed I/O.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1679 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* properties/nm-vpnc.c: Report error if writing out of exported
configuration fails. The silent treatment might work for me and my
wife, but not for failed I/O.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1678 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-properties.c: Intercept and short-circuit
the "delete_event" signal on the druid's parent window and handle it
our way, lest using the WM to close the druid results in a series of
bloody and ultimately lethal errors.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1677 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-properties.c: Validate VPN settings on
'Back' too or else the 'Forward' option is initially disabled despite
valid input.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1676 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix bad but simple bug where an active modem connection did not update
NM's connection state, breaking any app that did online/offline:
* src/NetworkManagerMain.h: Add 'modem_active' member to NMData,
represented whether a dial up connection is active, or not.
* src/nm-dbus-nm.c: Set and unset 'modem_active' in response
to modem activation and deactivation.
* src/NetworkManagerDbus.c: When asked our state, do not return
disconnected if the modem is active.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1674 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet.c: Remove the 'Remove' option that I added to the
applet. It just confuses the crap out of people and does not make a
lot of sense, as the daemon still runs.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1671 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/Arch/networkmanager.in: Added checks for HAL and dhcdbd
in start of service.
* src/backends/NetworkManagerArch.c: (nm_system_get_mtu): Added to
get Archlinux backend up to date.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1669 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Crispin Flowerday <gnome@flowerday.cx>:
* src/nm-openvpn-service-helper.c: Fix crash when no PtP IP address is
supplied.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1666 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Vinay R <rvinay@novell.com> and Robert Love <rml@novell.com>,
to add support for per-route MSS and improve support for per-interface
MTU:
* src/NetworkManagerSystem.c: Modify nm_system_device_set_ip4_route to
optionally take an MSS parameter and set it for the given route.
Remove nm_system_device_set_ip4_route_with_iface. Pass in the
NMIP4Config's stored MSS, if any.
* src/nm-ip4-config.c: Add 'mtu' and 'mss' to NMIP4Config, representing
the interface's MTU and the route's MSS, respectively. Add functions
nm_ip4_config_get_mtu, nm_ip4_config_set_mtu, nm_ip4_config_get_mss,
and nm_ip4_config_set_mss for retrieving and setting the MTU and the
MSS.
* src/nm-ip4-config.h: Add prototypes for nm_ip4_config_get_mtu,
nm_ip4_config_set_mtu, nm_ip4_config_get_mss, and
nm_ip4_config_set_mss.
* src/vpn-manager/nm-vpn-service.c: Modify to receive the MSS from the
VPN daemon.
* src/backends/NetworkManager{Arch,Debian,Gentoo,RedHat,Slackware,SUSE}.c:
Change the retval of nm_system_get_mtu to guint32.
* src/dhcp-manager/nm-dhcp-manager.c: Set the MTU on the new DHCP-given
NMIP4Config to the MTU provided by the system, if any. TODO: If DHCP
servers can specify MTU's, we should set it here if the MTU was not
provided.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1660 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
