This will help later patches with unrolling loops that end with a
break i.e. loops the always exit on their first interation.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
No shader-db changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This greatly simplifies the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All of the other brw_*_desc functions take a devinfo parameter, and all
of the others at least have an assert that uses it. Keep the parameter,
but mark it as unused.
Silences 37 warnings like:
In file included from src/intel/common/gen_disasm.c:27:0:
src/intel/compiler/brw_eu.h: In function ‘brw_pixel_interp_desc’:
src/intel/compiler/brw_eu.h:377:53: warning: unused parameter ‘devinfo’ [-Wunused-parameter]
brw_pixel_interp_desc(const struct gen_device_info *devinfo,
^~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Gen >= 9 have ability to control clamping of depth values separately at
near and far plane.
z_w is clamped to the range [min(n,f), 0] if clamping at near plane is
enabled, [0, max(n,f)] if clamping at far plane is enabled and [min(n,f)
max(n,f)] if clamping at both plane is enabled.
v2: 1) Use better coding style (Ian Romanick)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
_mesa_set_enable() and _mesa_IsEnabled() extended to accept new two
tokens GL_DEPTH_CLAMP_NEAR_AMD and GL_DEPTH_CLAMP_FAR_AMD.
v2: Remove unnecessary parentheses (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Enable _mesa_PushAttrib() and _mesa_PopAttrib() to handle
GL_DEPTH_CLAMP_NEAR_AMD and GL_DEPTH_CLAMP_FAR_AMD tokens.
Remove DepthClamp, because DepthClampNear + DepthClampFar replaces it,
as suggested by Marek Olsak.
Driver that enables AMD_depth_clamp_separate will only ever look at
DepthClampNear and DepthClampFar, as suggested by Ian Romanick.
v2: 1) Remove unnecessary parentheses (Marek Olsak)
2) if AMD_depth_clamp_separate is unsupported, TEST_AND_UPDATE
GL_DEPTH_CLAMP only (Marek Olsak)
3) Clamp against near and far plane separately (Marek Olsak)
4) Clip point separately for near and far Z clipping plane (Marek
Olsak)
v3: Clamp raster position zw to the range [min(n,f), 0] for near plane
and [0, max(n,f)] for far plane (Marek Olsak)
v4: Use MIN2 and MAX2 instead of CLAMP (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add some basic types and storage for the AMD_depth_clamp_separate
extension.
v2: 1) Drop unnecessary definition (Marek Olsak)
2) Expose extension in compatibility profile (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently we run the script but don't actually load any files, even in a
tarball where they exist.
Fixes: 3218056e0e
("meson: Build i965 and dri stack")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Adds suppport for INTEL_fragment_shader_ordering. We achieve
the fragment ordering by using the same instruction as for
beginInvocationInterlockARB() which is by issuing a memory
fence via sendc.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This extension provides new GLSL built-in function
beginFragmentShaderOrderingIntel() that guarantees
(taking wording of GL_INTEL_fragment_shader_ordering
extension) that any memory transactions issued by
shader invocations from previous primitives mapped to
same xy window coordinates (and same sample when
per-sample shading is active), complete and are visible
to the shader invocation that called
beginFragmentShaderOrderingINTEL().
One advantage of INTEL_fragment_shader_ordering over
ARB_fragment_shader_interlock is that it provides a
function that operates as a memory barrie (instead
of a defining a critcial section) that can be called
under arbitary control flow from any function (in
contrast the begin/end of ARB_fragment_shader_interlock
may only be called once, from main(), under no control
flow.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
When the SVBI Payload Enable is false I guess the register R1.4
which contains the Maximum Streamed Vertex Buffer Index is filled by zero
and GS stops to write transform feedback when the transform feedback
is not active.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107579
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is quite useful for debugging shader-transpiling issues in
virglrenderer.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This adds an environment-varaible that can be used for driver-specific
flags, as well as a flag for it to enable verbose output.
While we're at it, quiet some overly chatty debug-output by default.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This is the only direct call-site for fprintf in virgl; all other
call-sites call debug_printf instead. So let's follow in style here.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This is just debug-cruft left over. Let's just get rid of it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
INTEL_DEBUG=hex prints 32 bit hex value and due to endianness of CPU
byte order is reversed. In order to disassemble binary files, print
each byte instead of 32 bit hex value.
v2: Print blank spaces in order to vertically align output of compacted
instructions hex value with uncompacted instructions hex value.
(Matt Turner)
v3: Fix line wrap at correct length
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen7.5 has a BLEND_STATE of size 0 which includes a variable length
group. We did not deal with that very well, leading to an endless
loop.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107544
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Gives a +7.79% increase in FPS with Hitman on lowest quality settings on
my GTX 1060.
total instructions in shared programs : 5787979 -> 5748677 (-0.68%)
total gprs used in shared programs : 669901 -> 669373 (-0.08%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21068 -> 21064 (-0.02%)
local shared gpr inst bytes
helped 1 0 152 274 274
hurt 0 0 0 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Rather than the usual three that would be created.
total instructions in shared programs : 5796385 -> 5786560 (-0.17%)
total gprs used in shared programs : 670103 -> 669968 (-0.02%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21068 (-0.45%)
local shared gpr inst bytes
helped 1 0 64 1040 1040
hurt 0 0 27 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
total instructions in shared programs : 5819319 -> 5796385 (-0.39%)
total gprs used in shared programs : 670571 -> 670103 (-0.07%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21164 (0.00%)
local shared gpr inst bytes
helped 0 0 318 1758 1758
hurt 0 0 63 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
With this commit, OP_MAD is handled on nv50 too. This commit is also
useful for later commits.
Also, instead of creating a shladd, it relies on LateAlgebraicOpt to
create one. This simplifies the code and helps shader-db slightly overall.
total instructions in shared programs : 5820882 -> 5819319 (-0.03%)
total gprs used in shared programs : 670595 -> 670571 (-0.00%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21164 (0.00%)
local shared gpr inst bytes
helped 0 0 18 230 230
hurt 0 0 8 263 263
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This hits the shader-db numbers a good bit, though a few xmads is way
faster than an imul or imad and the cost is mitigated by the next commit,
which optimizes many multiplications by immediates into shorter and less
register heavy instructions than the xmads.
total instructions in shared programs : 5768871 -> 5820882 (0.90%)
total gprs used in shared programs : 669919 -> 670595 (0.10%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21068 -> 21164 (0.46%)
local shared gpr inst bytes
helped 0 0 38 0 0
hurt 1 0 365 3076 3076
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
v4: make the immediate field 16 bits
v5: don't ever emit h1 flags for immediates
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
v4: remove uint16_t(...)
v4: don't allow immediates outside [0,65535] in insnCanLoad()
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
>From Section 4.3.4 (Inputs) of the GLSL 1.50 spec:
"Only the input variables that are actually read need to be written
by the previous stage; it is allowed to have superfluous
declarations of input variables."
Fixes:
* interstage-multiple-shader-objects.shader_test
v2:
Update comment in ir.h since the usage of "used" field
has been extended.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101247
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
VkPhysicalDeviceProtectedMemoryProperties structure is new on Vulkan 1.1.
Fixes Vulkan CTS CL#2849.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The recent commit 4616639b49 introduced
the new function aubinator_error() which is a trivial wrapper around
fprintf() to STDERR. The call to fprintf() however is passed the message
msg directly:
fprintf(stderr, msg);
This is a format-security violation and leads to an FTBFS with
-Werror=format-security (GCC 8):
../../../src/intel/tools/aubinator.c: In function 'aubinator_error':
../../../src/intel/tools/aubinator.c:74:4: error: format not a string literal and no format arguments [-Werror=format-security]
fprintf(stderr, msg);
^~~~~~~
This patch fixes this trivially by introducing a catch-all "%s" format
argument.
Fixes: 4616639b49 ("intel: tools: split aub parsing from aubinator")
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of printing addresses like everyone else, we were accidentally
printing the offset from state base address. Also, state_map is a void
pointer so we were incrementing in bytes instead of dwords and every
state other than the first was wrong.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
First of all, setting iter->name in advance_field is unnecessary because
it gets set by gen_decode_field which gets called immediately after
gen_decode_field in the one call-site. Second, we weren't properly
initializing start_bit and end_bit in the initial condition of
gen_field_iterator_next so the first field of a struct would get printed
wrong if it doesn't start on the first bit. This is fixed by adding a
iter_start_field helper which sets the field and also sets up the other
bits we need. This fixes decoding of 3DSTATE_SBE_SWIZ.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Some hardware can do PIPE_TEX_WRAP_MIRROR_REPEAT but not
PIPE_TEX_WRAP_MIRROR_CLAMP and PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER.
Drivers for such hardware would like to advertise support for
ARB_texture_mirror_clamp_to_edge but not EXT_texture_mirror_clamp.
This commit adds a new PIPE_CAP_TEXTURE_MIRROR_CLAMP_TO_EDGE bit,
changes the extension enable to be based on that, and enables it
in all upstream drivers which supported PIPE_CAP_TEXTURE_MIRROR_CLAMP
(so they continue supporting this mode).
The batch decoder looks for a field with a particular name to decide
whether an MI_BB_START leads into a second batch buffer level. Because
the names are different between Gen7.5/8 and the newer generation we
fail that test and keep on reading (invalid) instructions.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107544
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Remove the explicit cast, using the appropriate wrapper instead.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Remove the explicit cast, using the appropriate wrapper instead.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Remove the explicit cast, using the appropriate wrapper instead.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
