Currently we were only making sure types were the same within a
single stage. This looks to have regressed with 953a0af8e3.
Fixes: 953a0af8e3 ("mesa: validate sampler uniforms during gluniform calls")
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
https://bugs.freedesktop.org/show_bug.cgi?id=97524
(cherry picked from commit d682f8aa8e)
As mentioned in the manual - comparing pthread_t handles via the C
comparison operator is incorrect and pthread_equal() should be used
instead.
Cc: Timothy Arceri <tarceri@itsqueeze.com>
Fixes: d8d81fbc31 ("mesa: Add infrastructure for a worker thread to process GL commands.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 52df318d61)
If VDPAU is installed in the non-default location, we'll fail to find
the headers and error at build time.
../../src/gallium/include/state_tracker/vdpau_dmabuf.h:37:25: fatal error: vdpau/vdpau.h: No such file or directory
#include <vdpau/vdpau.h>
^
Fixes: faba96bc60 ("st/vdpau: add new interop interface")
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 51c0c213b7)
The macro is introduced with pkgconfig v0.28 which isn't universally
available. Thus it will error at configure stage.
Reported-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
Fixes: ce562f9e3f ("EGL: Implement the libglvnd interface for EGL (v3)")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 179e21a720)
So atexit() is horrible and 4aea8fe7 is probably not a good idea. But
add an extra layer of duct-tape to the problem. Otherwise we hit a
situation where app using an atexit() handler that runs later than ours
doesn't hang when trying to tear down a context.
(gdb) bt
#0 util_queue_killall_and_wait (queue=queue@entry=0x52bc80) at ../../../src/util/u_queue.c:264
#1 0x0000007fb6c380c0 in atexit_handler () at ../../../src/util/u_queue.c:51
#2 0x0000007fb7730e2c in __run_exit_handlers () from /lib64/libc.so.6
#3 0x0000007fb7730e5c in exit () from /lib64/libc.so.6
#4 0x0000007fb7ce17dc in piglit_report_result (result=PIGLIT_PASS) at /home/robclark/src/piglit/tests/util/piglit-util.c:267
#5 0x0000007fb7ef99f8 in process_next_event (x11_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_x11_framework.c:139
#6 0x0000007fb7ef9a90 in enter_event_loop (winsys_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_x11_framework.c:153
#7 0x0000007fb7ef8e50 in run_test (gl_fw=0x432c20, argc=1, argv=0x7ffffff588) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_winsys_framework.c:88
#8 0x0000007fb7edb890 in piglit_gl_test_run (argc=1, argv=0x7ffffff588, config=0x7ffffff400) at /home/robclark/src/piglit/tests/util/piglit-framework-gl.c:203
#9 0x0000000000401224 in main (argc=1, argv=0x7ffffff588) at /home/robclark/src/piglit/tests/bugs/drawbuffer-modes.c:46
(gdb) c
Continuing.
[Thread 0x7fb67580c0 (LWP 3471) exited]
^C
Thread 1 "drawbuffer-mode" received signal SIGINT, Interrupt.
0x0000007fb72dda34 in pthread_cond_wait@@GLIBC_2.17 () from /lib64/libpthread.so.0
(gdb) bt
#0 0x0000007fb72dda34 in pthread_cond_wait@@GLIBC_2.17 () from /lib64/libpthread.so.0
#1 0x0000007fb6c38304 in cnd_wait (mtx=0x5bdc90, cond=0x5bdcc0) at ../../../include/c11/threads_posix.h:159
#2 util_queue_fence_wait (fence=0x5bdc90) at ../../../src/util/u_queue.c:106
#3 0x0000007fb6daac70 in fd_batch_sync (batch=0x5bdc70) at ../../../../../src/gallium/drivers/freedreno/freedreno_batch.c:233
#4 batch_reset (batch=batch@entry=0x5bdc70) at ../../../../../src/gallium/drivers/freedreno/freedreno_batch.c:183
#5 0x0000007fb6daa5e0 in batch_flush (batch=0x5bdc70) at ../../../../../src/gallium/drivers/freedreno/freedreno_batch.c:290
#6 fd_batch_flush (batch=0x5bdc70, sync=<optimized out>) at ../../../../../src/gallium/drivers/freedreno/freedreno_batch.c:308
#7 0x0000007fb6daba2c in fd_bc_flush (cache=0x461220, ctx=0x52b920) at ../../../../../src/gallium/drivers/freedreno/freedreno_batch_cache.c:141
#8 0x0000007fb6dac954 in fd_context_flush (pctx=0x52b920, fence=0x0, flags=<optimized out>) at ../../../../../src/gallium/drivers/freedreno/freedreno_context.c:54
#9 0x0000007fb6b43294 in st_glFlush (ctx=<optimized out>) at ../../../src/mesa/state_tracker/st_cb_flush.c:121
#10 0x0000007fb69a84e8 in _mesa_make_current (newCtx=newCtx@entry=0x0, drawBuffer=drawBuffer@entry=0x0, readBuffer=readBuffer@entry=0x0) at ../../../src/mesa/main/context.c:1654
#11 0x0000007fb6b7ca58 in st_api_make_current (stapi=<optimized out>, stctxi=0x0, stdrawi=0x0, streadi=0x0) at ../../../src/mesa/state_tracker/st_manager.c:827
#12 0x0000007fb6cc87e8 in dri_unbind_context (cPriv=<optimized out>) at ../../../../../src/gallium/state_trackers/dri/dri_context.c:217
#13 0x0000007fb6cc80b0 in driUnbindContext (pcp=0x5271e0) at ../../../../../../src/mesa/drivers/dri/common/dri_util.c:591
#14 0x0000007fb7d1da08 in MakeContextCurrent (dpy=0x433380, draw=0, read=0, gc_user=0x0) at ../../../src/glx/glxcurrent.c:214
#15 0x0000007fb7a8d5e0 in glx_platform_make_current () from /lib64/libwaffle-1.so.0
#16 0x0000007fb7a894e4 in waffle_make_current () from /lib64/libwaffle-1.so.0
#17 0x0000007fb7ef8c60 in piglit_wfl_framework_teardown (wfl_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_wfl_framework.c:628
#18 0x0000007fb7ef939c in piglit_winsys_framework_teardown (winsys_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_winsys_framework.c:238
#19 0x0000007fb7ef9c30 in destroy (gl_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_x11_framework.c:212
#20 0x0000007fb7edb7c4 in destroy () at /home/robclark/src/piglit/tests/util/piglit-framework-gl.c:184
#21 0x0000007fb7730e2c in __run_exit_handlers () from /lib64/libc.so.6
#22 0x0000007fb7730e5c in exit () from /lib64/libc.so.6
#23 0x0000007fb7ce17dc in piglit_report_result (result=PIGLIT_PASS) at /home/robclark/src/piglit/tests/util/piglit-util.c:267
#24 0x0000007fb7ef99f8 in process_next_event (x11_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_x11_framework.c:139
#25 0x0000007fb7ef9a90 in enter_event_loop (winsys_fw=0x432c20) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_x11_framework.c:153
#26 0x0000007fb7ef8e50 in run_test (gl_fw=0x432c20, argc=1, argv=0x7ffffff588) at /home/robclark/src/piglit/tests/util/piglit-framework-gl/piglit_winsys_framework.c:88
#27 0x0000007fb7edb890 in piglit_gl_test_run (argc=1, argv=0x7ffffff588, config=0x7ffffff400) at /home/robclark/src/piglit/tests/util/piglit-framework-gl.c:203
#28 0x0000000000401224 in main (argc=1, argv=0x7ffffff588) at /home/robclark/src/piglit/tests/bugs/drawbuffer-modes.c:46
(gdb) r
Fixes: 4aea8fe7 ("gallium/u_queue: fix random crashes when the app calls exit()")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 6fb7935ded)
The warning should be printed only when one explicitly uses the
deprecated configure toggle.
Fixes: 7748c3f5eb ("configure.ac: deprecate --with-egl-platforms over
--with-platforms")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 9915753e63)
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 7cd6e2df65)
Resolves build issues like the following:
src/gallium/winsys/sw/dri/dri_sw_winsys.c:203:31: error: pointer of type ‘void *’ used in arithmetic [-Werror=pointer-arith]
data = dri_sw_dt->data + (dri_sw_dt->stride * box->y) + box->x * blsize;
^
src/gallium/winsys/sw/dri/dri_sw_winsys.c:203:62: error: pointer of type ‘void *’ used in arithmetic [-Werror=pointer-arith]
data = dri_sw_dt->data + (dri_sw_dt->stride * box->y) + box->x * blsize;
^
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 309f4067a7)
Fixes a bug in
KHR-GL45.shader_draw_parameters_tests.ShaderMultiDrawArraysParameters.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 51deba0eb3)
When any count[i] is negative, we must skip all draws.
Moving to vbo makes the subsequent change easier.
v2:
- provide the function in all contexts, including GLES
- adjust validation accordingly to include the xfb check
v3:
- fix mix-up of pre- and post-xfb prim count (Nils Wallménius)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 42d5465b9b)
The same logic needs to be applied to glMultiDrawArrays.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 756e9ebbdd)
Found by inspection.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ea9a8940ca)
The description under RENDER_SURFACE_STATE::RedClearColor says,
For Sampling Engine Multisampled Surfaces and Render Targets:
Specifies the clear value for the red channel.
For Other Surfaces:
This field is ignored.
This means that the sampler on BDW doesn't support CCS.
Cc: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit d9d793696b)
In this case, ctx->flush_queue would not have been initialized.
Fixes: 0b613c20 ("freedreno: enable draw/batch reordering by default")
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit d4601b0efc)
Currently the former controls more than just EGL. With follow-up commits
we'll unwind and fix things so that one can build the different drivers
with said platform support.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The configure option is used by more than just EGL and with next commit
we'll rename it accordingly. Thus having the check will (and is atm)
incorrect.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We are not using either of these. The respecive xcb packages are used
instead.
v2: Rebase, reword commit message.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The new interface mostly just sits on top of the existing library.
The only change to the existing EGL code is to split the client
extension string into platform extensions and everything else. On
non-glvnd builds, eglQueryString will just concatenate the two strings.
The EGL dispatch stubs are all generated. The script is based on the one
used to generate entrypoints in libglvnd itself.
v2: [Kyle]
- Rebased against master.
- Reworked the EGL makefile to use separate libraries
- Made the EGL code generation scripts work with Python 2 and 3.
- Change gen_egl_dispatch.py to use argparse for the command line arguments.
- Assorted formatting and style cleanup in the Python scripts.
v3: [Emil Velikov]
- Rebase
- Remove separate glvnd glx/egl configure toggles
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: efd63e2 ("mesa: Connect the generated GL command marshalling code to the build.")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We should check the presence in order to determine if we should
[implicitly] set the CFLAGS/LIBS
v2: Drop spurious OMX hunk (Eric)
Cc: Eric Anholt <eric@anholt.net>
Reported-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Earlier commit bumped the requirement for the SWR driver.
v2: Fold the note with the LLVM 3.9 one (Tim)
Fixes: 3c52a7316a ("swr: [configure.ac/scons] require c++14")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
I accidentally moved the bo->bufmgr dereference above the NULL check
when cleaning up this code.
While passing NULL to free() is a common pattern...passing NULL to
unmap seems pretty bad. You really ought to know whether you have
a buffer or not. We don't want to paper over bugs like that. So,
just drop the NULL check altogether.
CID: 1405006
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Starting positions >= 32 are not part of the header, rather than >.
Caught by Coverity, which found that "bits <<= field->start" may shift
by 32, which has undefined behavior.
CID: 1404968
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If ret is 0, we return. If ret is not 0, we return. This is dead.
CID: 1405013 (Structurally dead code (UNREACHABLE))
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This hides the overhead of everything in the driver after the CS flush and
before returning from pipe_context::flush.
Only microbenchmarks will benefit.
+2% FPS for glxgears.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Not possible with GL and it will make future gallium rework easier.
(also it's something I wouldn't like to support)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because the compression is skipped with non-dirty textures.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This moves the hashing of shader source for the cache lookup to before
the preprocessor. In our experience, shaders are unlikely to hash the
same after preprocessing if they didn't hash the same before, so we can
skip preprocessing for cache hits.
Improves Deus Ex start-up times with a warm cache from ~30 seconds to
~22 seconds.
Also fixes the leaking of state.
V2: fix indentation
v3: add the value of MESA_EXTENSION_OVERRIDE to the hash of the shader.
Tested-by (v2): Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Due to a max limit of 65,536 entries on the index table that we use to
decide if we can skip compiling individual shaders, it is very likely
we will have collisions.
To avoid doing too much work when the linked program may be in the
cache this patch delays calling the optimisations until link time.
Improves cold cache start-up times on Deus Ex by ~20 seconds.
When deleting the cache index to simulate a worst case scenario
of collisions in the index, warm cache start-up time improves by
~45 seconds.
V2: fix indentation, make sure to call optimisations on cache
fallback, make sure optimisations get called for XFB.
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This prevents a user from using a cache created on one hardware
generation on a different one. Of course, with Intel hardware, this
requires moving their drive from one machine to another but it's still
possible and we should prevent it.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Cc: mesa-stable@lists.freedesktop.org
This adds native fence fd support to etnaviv, similarly to commit
0b98e84e9b ("freedreno: native fence fd"), enabled for kernel
driver version 1.1 or later.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
v2 (Andreas Boll):
- Mark GL 4.1 as supported by i965/gen7+
- Mark GL_ARB_shader_precision as supported by i965/gen7+
- Update release notes
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
