This is a squash of three related cherry-picks from master.
[PATCH 1/3]
i965/gen6/blorp: Set need_workaround_flush immediately after primitive
This patch makes the workaround code in gen6 blorp follow the pattern
established in the regular draw path. It shouldn't result in any
behavioral change.
On gen6, there are two places where we emit 3D_CMD_PRIM: brw_emit_prim()
and gen6_blorp_emit_primitive(). brw_emit_prim() sets
need_workaround_flush immediately after emitting the primitive, but
blorp does not. Blorp sets need_workaround_flush at the bottom of
brw_blorp_exec().
This patch moves the need_workaround_flush from brw_blorp_exec() to
gen6_blorp_emit_primitive(). There is no need to set
need_workaround_flush in gen7_blorp_emit_primitive() because the
workaround applies only to gen6.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 5e0cd58de4)
[PATCH 2/3]
i965/gen6/blorp: Set need_workaround_flush at top of blorp
Unconditionally set brw->need_workaround_flush at the top of gen6 blorp
state emission.
The art of emitting workaround flushes on Sandybridge is mysterious and
not fully understood. Ken and I believe that
intel_emit_post_sync_nonzero_flush() may be required when switching from
regular drawing to blorp. This is an extra safety measure to prevent
undiscovered difficult-to-diagnose gpu hangs.
I verified that on ChromeOS, pre-patch, need_workaround_flush was not
set at the top of blorp, as Paul expected. To verify, I inserted the
following debug code at the top of gen6_blorp_exec(), restarted the ui,
and inspected the logs in /var/log/ui. The abort gets triggered so early
that the browser never appears on the display.
static void
gen6_blorp_exec(...)
{
if (!brw->need_workaround_flush) {
fprintf(stderr, "chadv: %s:%d\n", __FILE__, __LINE__);
abort();
}
...
}
CC: Kenneth Graunke <kenneth@whitecape.org>
CC: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 6a5c86f486)
[PATCH 3/3]
i965/gen6/blorp: Remove redundant HiZ workaround
Commit 1a92881 added extra flushes to fix a HiZ hang in
WebGL Google Maps. With the extra flushes emitted by the previous two
patches, the flushes added by 1a92881 are redundant.
Tested with the same criteria as in 1a92881: by zooming in and out
continuously for 2 hours on Sandybridge Chrome OS (codename
Stumpy) without a hang.
CC: Kenneth Graunke <kenneth@whitecape.org>
CC: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 90368875e7)
Conflicts:
src/mesa/drivers/dri/i965/gen6_blorp.cpp
Otherwise an application that requested an OpenGL ES 1.x context would
actually get a desktop OpenGL context.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.1 9.2 10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 33214679bb)
This is necessary to prevent the next SURFACE_SYNC packet from
hanging the GPU.
https://bugs.freedesktop.org/show_bug.cgi?id=73418
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: "9.2" "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d51dbe048a)
For a variety of reasons mmap (selinux and pax to name
a few) and can fail and with current code. This will
result in a crash in the driver, if not worse.
This has been the case since the inception of the
gallium copy of rtasm.
Cc: 9.1 9.2 10.0 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73473
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
(cherry picked from commit 4dd445f1cf)
We were calling draw_total_vs_outputs() too early. The call to
draw_pt_emit_prepare() could result in the vertex size changing.
So call draw_total_vs_outputs() after draw_pt_emit_prepare().
This fix would seem to be needed for the non-LLVM code as well,
but it's not obvious. Instead, I added an assertion there to
try to catch this problem if it were to occur there.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72926
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit ad814d04ca)
Conflicts:
src/gallium/auxiliary/draw/draw_pt_fetch_shade_pipeline.c
Simple shaders such as:
void splat(vec2 v, float f) {
v[0] = v[1] = f;
}
failed to compile with the following error:
error: value of type vec2 cannot be assigned to variable of type float
First, we would process v[1] = f, and transform:
LHS: (expression float vector_extract (var_ref v) (constant int (1)))
RHS: (var_ref f)
into:
LHS: (var_ref v)
RHS: (expression vec2 vector_insert (var_ref v) (constant int (1))
(var_ref f))
Note that the LHS type is now vec2, not a float. This is surprising,
but not the real problem.
After emitting assignments, this ultimately becomes:
(declare (temporary) vec2 assignment_tmp)
(assign (xy)
(var_ref assignment_tmp)
(expression vec2 vector_insert (var_ref v) (constant int (1))
(var_ref f)))
(assign (xy) (var_ref v) (var_ref assignment_tmp))
We would then return (var_ref assignment_tmp) as the rvalue, which has
the wrong type---it should be float, but is instead a vec2.
To fix this, we simply return (vector_extract (var_ref assignment_temp)
<the appropriate channel>) to pull out the desired float value.
Fixes Piglit's chained-assignment-with-vector-constant-index.vert and
chained-assignment-with-vector-dynamic-index.vert tests.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74026
Reported-by: Dan Ginsburg <dang@valvesoftware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 44a86e2b4f)
When processing assignments, we have both an LHS and RHS. At a glance,
"lhs_expr" clearly refers to the LHS, while a generic name like "expr"
is ambiguous.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6c158e110c)
OpenGL with ARB_ES2_compatibility allows shaders that specify #version
100.
This fixes the Khronos OpenGL test(Texture_Rectangle_Samplers_frag.test)
failure.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit c907595ba7)
This fixes a serious regression introduced
in 4e549ddb50.
Cc: 9.2 10.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit d40532f260)
NV3x cards don't support NPOT textures. Technically this restriction
could be worked around, but since it also doesn't expose any video
decoding hw, just turn it off entirely.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 00e4314f6d)
The textures array is defined as a number of NV50_MAX_PIPE_CONSTBUFS
per shader stage. Currently the nv50 driver handles only 3 shader
stages, thus we wreck chaos when accessing array-out-of-bounds.
Cc: 9.1 9.2 10.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 12e744abbb)
The textures array is defined as a number of PIPE_MAX_SAMPLERS per shader stage.
Currently nv50 driver handles only 3 shader stages, thus we wreck chaos when
accessing array-out-of-bounds.
Fixes a segfault in piglit/bin/arb_texture_buffer_object-data-sync -fbo -auto
Cc: 9.1 9.2 10.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit d606ca37eb)
Commit c13970808 (mesa: GL_EXT_secondary_color is not optional) changed
CHECK_EXTENSION2(EXT_secondary_color, ARB_vetex_program, cap)
to
CHECK_EXTENSION(ARB_vertex_program, cap)
However CHECK_EXTENSION2 checks that either extension is available, not
both. Remove the extension check entirely since the intent was for it to
always be enabled.
v2: Fix glGet*(GL_COLOR_SUM) too. Suggested by Ian.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 9.2 10.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 739dc95e67)
The radeonsi code was not cleaning up either of these items leading to
leaked memory.
v2: Move cleanup to r600_common_context_cleanup instead of duplicating
the logic for SI
CC: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 5ac3229f76)
Conflicts:
src/gallium/drivers/radeon/r600_pipe_common.c
The ES and desktop GL specs diverge here. Yay!
In desktop OpenGL, the driver can perform online compression of
uncompressed texture data. GL_NUM_COMPRESSED_TEXTURE_FORMATS and
GL_COMPRESSED_TEXTURE_FORMATS give the application a list of formats
that it could ask the driver to compress with some expectation of
quality. The GL_ARB_texture_compression spec calls this "suitable for
general-purpose usage." As noted above, this means
GL_COMPRESSED_RGBA_S3TC_DXT1_EXT is not included in the list.
In OpenGL ES, the driver never performs compression.
GL_NUM_COMPRESSED_TEXTURE_FORMATS and GL_COMPRESSED_TEXTURE_FORMATS give
the application a list of formats that the driver can receive from the
application. It is the *complete* list of formats. The
GL_EXT_texture_compression_s3tc spec says:
"New State for OpenGL ES 2.0.25 and 3.0.2 Specifications
The queries for NUM_COMPRESSED_TEXTURE_FORMATS and
COMPRESSED_TEXTURE_FORMATS include COMPRESSED_RGB_S3TC_DXT1_EXT,
COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT,
and COMPRESSED_RGBA_S3TC_DXT5_EXT."
Note that the addition is only to the OpenGL ES specification!
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
See-also: http://lists.freedesktop.org/archives/mesa-dev/2013-October/047439.html
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0a75909b3f)
The temporary variable used to store _ColorDrawBufferIndexes must be
signed (GLint), otherwise the following conditional will be incorrectly
evaluated. Leading to crashes in the driver/mesa or accessing/writing
to arbitrary memory location. The bug dates back to 2009.
Cc: 10.0 9.2 9.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit bfcf78c110)
_ColorDrawBufferIndexes is defined as GLint* and using a GLuint*
will result in the first part of the conditional to be evaluated to
true always.
Unintentionally introduced by the following commit, this will result
in a driver segfault if one is using an old version of the piglit test
bin/clearbuffer-mixed-format -auto -fbo
commit 03d848ea10
Author: Marek Olšák <marek.olsak@amd.com>
Date: Wed Dec 4 00:27:20 2013 +0100
mesa: fix interpretation of glClearBuffer(drawbuffer)
This corresponding piglit tests supported this incorrect behavior instead of
pointing at it.
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: 10.0 9.2 9.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 10368e1446)
This should help with cross-compiling and multilib when $CHOST-specific
llvm-config is expected rather than build host default one.
It will help us a bit in Gentoo where we've started using
i686-pc-linux-gnu-llvm-config for 32-bit multilib LLVM.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=73100
CC: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5ea2376334)
Prior to this patch, if we ran out of aperture space during
brw_try_draw_prims(), we would rewind the batch buffer pointer
(potentially throwing some state that may have been emitted by
brw_upload_state()), flush the batch, and then try again. However, we
wouldn't reset the dirty bits to the state they had before the call to
brw_upload_state(). As a result, when we tried again, there was a
danger that we wouldn't re-emit all the necessary state. (Note: prior
to the introduction of hardware contexts, this wasn't a problem
because flushing the batch forced all state to be re-emitted).
This patch fixes the problem by leaving the dirty bits set at the end
of brw_upload_state(); we only clear them after we have determined
that we don't need to rewind the batch buffer.
Cc: 10.0 9.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fb6d9798a0)
We definitely want to fall through to the unsynchronized map case, instead
of wasting bandwidth on a copy. Prevents a -43.2407% +/- 1.06113% (n=49)
performance regression on aa10perf when teaching glamor to provide the
GL_INVALIDATE_RANGE_BIT information.
This is a performance fix, which I usually wouldn't cherry-pick to stable.
But this was really was just a bug in the code, its presence would
discourage developers from giving us the best information they can, and I
think we've got fairly high confidence in the unsynchronized map path
already.
Cc: 10.0 9.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f46563fe1c)
MSVC 2013 version of math.h includes an fma() function.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit e8ff08edd8)
This small rearrangement avoids MSVC 2013 ICE. Also, this should be
a better memory access order.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 8fcddd325c)
This fixes the following compile error:
src\glsl\ir_constant_expression.cpp(1405) : error C2666: 'copysign' : 3
overloads have similar conversions
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 067ad6e53e)
The hardware is broken with nonzero texel offsets and unnormalized
coordinates; instead of doing correct offsetting, we get garbage.
This just extends the existing workaround for ir_txf and
ir_tg4+gsampler2DRect to also consider ir_tex+gsampler2DRect.
Fixes broken rendering in 'tesseract' when 'mesa_texrectoffset_bug' is
not enabled; also fixes the new piglit test
'tests/spec/glsl-1.30/execution/fs-textureOffset-Rect'.
Has been broken ~forever; suggesting including this in only 10.0 because
the lowering pass doesn't exist in 9.2 or earlier so would require quite
a different patch.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Lee Salzman <lsalzman@gmail.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9e99735f30)
Commit 9119269ca1 moved the texel
buffer allocation to _swrast_texture_span(), however, when compiled
with OpenMP support this code already runs multi-threaded so a
critical section is required to prevent multiple allocations and
rendering errors.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 2a0fb946e1)
This is part of the GL_EXT_packed_float extension.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit 3486f6f31b
Also squashed in a subsequent bug fix:
mesa: check for MESA_FORMAT_RGB9_E5_FLOAT in _mesa_is_format_signed()
This packed floating point format only stores positive values.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 0fc8d7c66e)
Also squashed in a second, subsequent bug fix:
mesa: check bits per channel for GL_RGBA_SIGNED_COMPONENTS_EXT query
If a channel has zero bits it's not signed.
v2: also check for luminance and intensity format bits. Bruce
Merry's proposed piglit test hits the luminance case.
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit d046fd731a)
Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=73096
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
Conflicts:
src/mesa/main/get.c
* These make up the base of what C++ GL Haiku applications
use for 3D rendering.
* Not placed in includes/GL to prevent Haiku headers from
getting installed on non-Haiku systems.
Acked-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 56d920a5c1)
The compiler back-ends (i965's fs_visitor and brw_visitor,
ir_to_mesa_visitor, and glsl_to_tgsi_visitor) assume that when
ir_loop::counter is non-null, it points to a fresh ir_variable that
should be used as the loop counter (as opposed to an ir_variable that
exists elsewhere in the instruction stream).
However, previous to this patch:
(1) loop_control_visitor did not create a new variable for
ir_loop::counter; instead it re-used the existing ir_variable.
This caused the loop counter to be double-incremented (once
explicitly by the body of the loop, and once implicitly by
ir_loop::increment).
(2) ir_clone did not clone ir_loop::counter properly, resulting in the
cloned ir_loop pointing to the source ir_loop's counter.
(3) ir_hierarchical_visitor did not visit ir_loop::counter, resulting
in the ir_variable being missed by reparenting.
Additionally, most optimization passes (e.g. loop unrolling) assume
that the variable mentioned by ir_loop::counter is not accessed in the
body of the loop (an assumption which (1) violates).
The combination of these factors caused a perfect storm in which the
code worked properly nearly all of the time: for loops that got
unrolled, (1) would introduce a double-increment, but loop unrolling
would fail to notice it (since it assumes that ir_loop::counter is not
accessed in the body of the loop), so it would unroll the loop the
correct number of times. For loops that didn't get unrolled, (1)
would introduce a double-increment, but then later when the IR was
cloned for linking, (2) would prevent the loop counter from being
cloned properly, so it would look to further analysis stages like an
independent variable (and hence the double-increment would stop
occurring). At the end of linking, (3) would prevent the loop counter
from being reparented, so it would still belong to the shader object
rather than the linked program object. Provided that the client
program didn't delete the shader object, the memory would never get
reclaimed, and so the shader would function properly.
However, for loops that didn't get unrolled, if the client program did
delete the shader object, and the memory belonging to the loop counter
got re-used, this could cause a use-after-free bug, leading to a
crash.
This patch fixes loop_control_visitor, ir_clone, and
ir_hierarchical_visitor to treat ir_loop::counter the same way the
back-ends treat it: as a freshly allocated ir_variable that needs to
be visited and cloned independently of other ir_variables.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72026
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d6eb4321d0)
If an ir_loop has a non-null "counter" field, the variable referred to
by this field is implicitly read and written by the loop. We need to
account for this in ir_variable_refcount, otherwise there is a danger
we will try to dead-code-eliminate the loop counter variable.
Note: at the moment the dead code elimination bug doesn't occur due to
a bug in ir_hierarchical_visitor: it doesn't visit the "counter"
field, so dead code elimination doesn't treat it as a candidate for
elimination. But the patch to follow will fix that bug, so we need to
fix ir_variable_refcount first in order to avoid breaking dead code
elimination.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9d2951ea0a)
Emitting flushes before depth and hiz resolves at the top of blorp's
state emission fixes the hang. Marchesin and I found the fix
experimentally, as opposed to adhering to a documented hardware
workaround. A more minimal fix likely exists, but this gets the job
done.
Fixes HiZ hangs in the new WebGL Google maps on Sandybridge Chrome OS.
Tested by zooming in and out continuously for 2 hours.
This patch is based on
8bc07bb701
CC: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70740
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1a928816a1)
The preprocessor currently accepts multiple else/elif-groups
per if-section. The GLSL-preprocessor is defined by the C++
specification, which defines the following parse-rule:
if-section:
if-group elif-groups(opt) else-group(opt) endif-line
This clearly only allows a single else-group, that has to come
after any elif-groups.
So let's modify the code to follow the specification. Add test
to prevent regressions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit eb212c5a30)
This reverts commit 136a12ac98.
According to belak51 on IRC, this commit broke Allegro, which would no
longer compile. Applications apparently expect the GLXContextID typedef
to exist in glx.h; removing it breaks them. A bit of searching around
the internet revealed other complaints since upgrading to Mesa 10.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f425d56ba4)
0x9649 is sumo2, not sumo.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: "9.2" "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e2d53fac1c)
Found while tracking down memory leaks in VDPAU playback
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
CC: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3ddabe0d52)
Prevents a potential memory leak found when tracking down something else.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
CC: "10.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 20446d0e53)
