And use the type in functions instead of a generic `uint32_t` to make it
easier to notice the wrong type.
Fixes: 47e02a2ef1 ("v3dv: add a fast path for vkCmdClearAttachments")
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24787>
Instead, we replace every use of it with nir_def. Most of this commit
was generated by sed:
sed -i -e 's/dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
A few manual fixups were required in lima and the nir_legacy code.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
For tex instructions that don't have sampler state use backend_flags
instead of sampler index to bind default sampler state.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24537>
We really want to avoid cpu jobs as much as possible. Also,
the texel buffer path we have for this should be able to
handle most cases.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24466>
We had this incorrectly included inside the body of loop over
the subpass attachments so when all attachments are unused we
would not set this correctly.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24396>
The Vulkan CTS started generating the list of valid versions the
driver can report as conformant against based on the active branches,
and the branch we were reporting up to now is no longer valid.
Fixes dEQP-VK.api.driver_properties.conformance_version
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23980>
`cl_aligned_packet_length()` expand literals, so use ALIGN_POT to compute it
at compile time.
`v3dv_AllocateMemory()` uses a 64-bit `allocationSize`, so use `align64()`.
`v3d_lower_nir()` uses a 32-bit `shared_size`, so use `align()`.
Extracted out of https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23932
for easier review.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23938>
Here we were aliasing the full compressed image with an uncompressed
format that we would then use for sampling during the blit copy. This
had 2 issues:
1. Uncompressed image views would have smaller dimensions than the
compressed image, and thus, would also have less mip levels.
2. When sampling from smaller mip levels, the hw internally computes
the size of the mip level from the size of level 0, which then uses
to interpret the texture coordinates, but for some texture sizes
this size would not be an exact match for compressed and uncompressed
views.
To fix this, we modify the aliasing technique to only alias the
miplevel selected in the copy as a level 0 image and we ensure the
slice 0 for that image matches exactly the slice description of the
aliased mip level in the original image.
Fixes all test failures in
dEQP-VK.api.copy_and_blit.core.image_to_buffer.*
for compressed formats when we forcefully disable the TLB path.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23919>
Called copy_image_to_buffer_texel_buffer, that reuses
copy_image_linear_texel_buffer, by setting up a image destination from
the buffer destination.
This fixes new ycbcr tests added recently (1.3.6.0) like:
dEQP-VK.ycbcr.copy.*.*.*buffer*
that were failing due lack of a codepath handling them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23864>
In order to have common code to create a image from a buffer, that we
plan to use later on a new codepath.
This refactor adds three new methods:
* One that gathers all the info required to create the structures and
implement the operation
* One that creates the image from the buffer, based on that info
* One that creates a BlitRegion from that info
This seems like too much splitting, but we needed to do it in this
way, because we can't ensure that future uses of this common code
would use a BlitRegion.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23864>
With TLB paths we are always storing full tiles, so we can't use it
if the regions we store are not a multiple of the tile size (or the
full image).
Unfortunately, at the point we call this we don't usually have the
tile size yet so for now we skip the path if we are not copying
full mip levels.
Fixes various CTS fails in:
dEQP-VK.ycbcr.copy.*.optimal*buffer_optimal*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23739>
We want to store the slice size in pixels not the level size
after padding to a power of 2 we use miplevels >= 2.
Fixes: 1cb2d2a5ee ('v3dv: store slice dimensions in pixels')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23739>
There's no reason to use the gallium `p_compiler.h` types in vulkan code.
Inspired by https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23577,
but using `size_t` for `ulist_data_size` because its two users are
`blob_read_bytes()` and `memcpy()`, both of which expect a `size_t`.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23795>
It is now set by all relevant drivers and not checked anywhere.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23191>
If the viewport center is not positive we can't express it
through the fine coordinates, which are unsigned, and we
need to use the coarse coordinates too.
Fixes new crashes in Vulkan CTS 1.3.6.0:
dEQP-VK.draw.renderpass.offscreen_viewport.*negative*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23489>
These are split between fine and coarse coordinates. We have only been
using fine until now, so we kept the same naming convention we had
prior to V3D 4.1 for simplicity, but we will start using the coarse
coordinates soon too.
Also, the signedness was reversed: coarse coordinates are signed and
fine coordinates are unsigned.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23489>
KHR_maintenance1 allows clients to specify a negative
height, but not a negative width, so assert on that and
simplify the computations for the horizontal dimension.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23489>
This only used by vulkan drivers and depends on vulkan util, so do the move to decouple
nir from vulkan utils
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23444>
Via Coccinelle patch:
@@
expression a, b, c;
@@
-a.src = nir_src_for_ssa(b);
-a.src_type = c;
+a = nir_tex_src_for_ssa(c, b);
@@
expression a, b, c;
@@
-a.src_type = c;
-a.src = nir_src_for_ssa(b);
+a = nir_tex_src_for_ssa(c, b);
Plus manual fixups, including...
* a few identity swizzles changed to nir_trim_vector in TTN and prog-to-nir to
fix the Coccinelle-botched formatting, and similarly a pointless nir_channels
* collapsing a now-pointless temp in vtn
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23352>
They are exactly the same, so it's safe to do the replace
Also gen OS_TIMEOUT_INFINITE var with rusticl_mesa_bindings_rs by OS_ prefix and
include "util/os_time.h" in rusticl/rusticl_mesa_bindings.h
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23401>
This is a prepare step to remove depends on p_defines.h in src/util/*
This is done by:
replace pipe_prim_type with mesa_prim
replace shader_prim with mesa_prim
replace PIPE_PRIM_MAX with MESA_PRIM_COUNT
replace SHADER_PRIM_ with MESA_PRIM_
replace PIPE_PRIM_ with MESA_PRIM_
This patch only replace code only
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23369>
Piglit tests for v3d highlighted issues with the padding
computation when allocating memory for slices. This change
moves the fixes from v3d to v3dv.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23260>
Fixes hundreds of dEQP-VK.api.copy_and_blit.* tests when including the
assert that the alignment in align() is valid, as added in !20153.
Fixes: 3ba839bf73 ("v3dv: align compressed image regions to block size")
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23224>
This simplifies things a bit. Note that in some cases, the arguments are
swapped, because multiplications are commutative, and nir_fmul_imm only
allows the second operand to be an immediate.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23179>
This fixes an assert crash in UE4 when forcing the blit path for
image copies, caused by an image copy of a small miplevel which
pixel size is smaller than a single compressed block, leading to
an empty blit region.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23180>
We had a check to ensure we were copying full slices, but the
size check was done against the base mip level, so in practice
we were only using the TFU for mip 0.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23180>
