Valid values for URBAllocation start at 32, so substract that
before programming the register.
This was missed when porting from the GL driver.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit a52ee32a9a)
This fixes both Europa Universalis IV and Stellaris rendering on i965.
This was tested on SKL.
This fix was discovered by Jakub Szuppe at Stream HPC
(https://streamhpc.com/).
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96958
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95530
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6a7c5257ca)
st/mesa creates a surface that reinterprets the compressed blocks as
RGBA16UI or RGBA32UI. We have to adjust width0 & height0 accordingly to
avoid out-of-bounds memory accesses by CB.
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 25e5534734)
Current version fails to set depthstencil.depth_offset when there
is only stencil attachment (it does set the intra tile offsets
though). Fixes piglits:
g45,g965,ilk: depthstencil-render-miplevels 1024 s=z24_s8
g45,ilk: depthstencil-render-miplevels 273 s=z24_s8
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit 6967285981)
The maximum LOD bias supported is the same as the max texture level
supported.
Fixes piglit: ext_texture_lod_bias
Fixes: c9e8b49b ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 5065549e2a)
Now that we support RB swapped targets by using a shader variant, we
must derive the color mask from both the blend state and the bound
framebuffer.
Fixes piglit: fbo-colormask-formats
Fixes: 7f62ffb68a ("etnaviv: add support for rb swap")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 8644b59b5d)
This replaces the open coded etnaviv version of the color pack with the
common util_pack_color.
Fixes piglits:
arb_color_buffer_float-clear
fcc-front-buffer-distraction
fbo-clearmipmap
Fixes: c9e8b49b ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit d6aa2ba2b2)
etna_resource_copy_region handles resources with multiple samples
by falling back to the software path. There is no need to kill the
application there.
Fixes: c9e8b49b ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 6633880e7e)
When copying a resource fully we can just blit the whole level. This allows
to use the RS even for level sizes not aligned to the RS min alignment. This
is especially useful, as etna_copy_resource is part of the software fallback
paths (used in etna_transfer), that are used for doing unaligned copies.
Fixes: c9e8b49b ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit ff490eb8fd)
If the blit region is not aligned to the RS min alignment don't try
to execute the blit, but fall back to the software path.
Fixes: c9e8b49b ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 2a6183d416)
As described inline - follow what's written in the manual and what works
for all platforms that Mesa supports.
We want to untangle things leaving only -pthread, yet that has a
potential of causing regressions. Thus we'll do it as a follow-up patch.
As a nice side-effect this resolves issues, where the system lacks
libpthread.so, yet the linker does not warn about it and we and up with
unresolved symbols.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101071
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
(cherry picked from commit e5aa806e5f)
Before, we weren't setting step rate so we got whatever old value
happened to be lying around. This can lead to some interesting
rendering errors. In particular, if you run the OpenGL ES CTS with
dEQP-GLES3.functional.instanced.types.mat2x4 immediately followed by one
of the dEQP-GLES3.functional.transform_feedback.* tests, the transform
feedback test gets stale instancing data from the other test and fails.
The only thing that is causing this to not be a problem today is that we
use meta for clears and meta is setting up vertex buffers via the VBO or
non-interleaved path and setting step_rate to 0 for us. When blorp
depth/stencil clears are enabled, meta is no longer sitting between the
two tests and the stale data starts causing noticeable problems.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
(cherry picked from commit f762962f7f)
Instance divisor is a property of the vertex buffer and not the vertex
element so if we ever see anything other than 0, bail.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
(cherry picked from commit b3569e7445)
According to the docs, a simple CS stall is insufficient to ensure that
the memory from the flush is visible and an end-of-pipe sync is needed.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d9261275cc)
v2 (Jason Ekstrand):
- Take a flags parameter to control the flushes
- Refactoring
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7b607aae3f)
These two functions contain almost identical logic except for one SNB
workaround required for render target cache flushes. They may as well
call into the same code so we only have to handle the work-arounds in
one place.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b771d9a136)
It's a 64-bit value. Splitting it up just makes the function arguments
awkward.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a8ea68bc93)
[Andres Gomez: modified remaining uses of the new API]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Testing with zlib versions 1.2.{3,4,5,6,7,8} showed no difference in
functionality, correctness, or zlib API usage and 1.2.3 is the oldest
version available in still actively deployed production Linux
distributions (RHEL/CentOS 6 and SuSE 11).
Build 17.1.1 against the system supplied zlib-devel packages for 1.2.3
in EL6 and 1.2.7 on EL7. I then swapped out the zlib version at runtime
via LD_LIBRARY_PATH with ones build from the release tarballs from
zlib.net
Testwise - I ran the piglit shader profile with --quick addded to the
tests since I figured that would exercise the shader cache, which would
in turn use zlib.
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Cc: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
[Emil Velikov: add hunk about version/piglit testing]
Acked-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit ad69b037b1)
Fixes for:
src/util/rand_xor.c:60:13: error: implicit declaration of function 'open' [-Werror=implicit-function-declaration]
int fd = open("/dev/urandom", O_RDONLY);
^~~~
src/util/rand_xor.c:60:34: error: 'O_RDONLY' undeclared (first use in this function)
int fd = open("/dev/urandom", O_RDONLY);
^~~~~~~~
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
(cherry picked from commit adadadc151)
The max_array_access field applies to the first dimension, which means
we only want to set it for the 1D clip dist arrays.
This fixes an ir_validate assert seen with
KHR-GL44.cull_distance.functional
on nouveau and radeon with debug builds.
Fixes: a08c4ebbe (glsl: rewrite clip/cull distance lowering pass)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 53587b7105)
Fixes trace dumping crash for SI or when RADV_DEBUG=noibs is set.
Fixes: 97dfff5410 "radv: Dump command buffer on hang."
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit fae3b13905)
The shader reads the descriptor to decide if it should take the
fmask value, however we weren't initing it always, which meant
random crap, esp with MSAA depth textures.
Fixes random hangs with:
dEQP-VK.glsl.builtin_var.fragdepth.*
v2: check fmask_state is not NULL
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 51553c0bea)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/amd/vulkan/radv_image.c
This just sets the vulkan device type depending on whether
this is an APU or GPU.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
(cherry picked from commit 2890a71158)
Sets could have been ignored during previous descriptor set flush
due to the shader not using them and therefore no SGPR being assigned.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
(cherry picked from commit 4415a46be2)
Conflicts:
src/amd/vulkan/radv_cmd_buffer.c
src/amd/vulkan/radv_meta.c
We clear the descriptors_dirty array afterwards, so the SGPRs for
the other pipeline don't get updated on the flush for that other
draw/dispatch, so we have to make sure we do it immediately.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
(cherry picked from commit 5fb8bb3065)
[Emil Velikov: drop radv_flush_indirect_descriptor_sets hunk - missing
in branch]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/amd/vulkan/radv_cmd_buffer.c
Specification states that in case of error, value should not be
written, patch changes buffer age queries to return -1 in case of
error so that we can skip changing the value.
In addition, small change to droid_query_buffer_age to return 0
in case buffer does not have a back buffer available.
Fixes:
dEQP-EGL.functional.negative_partial_update.not_postable_surface
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8fac894f9b)
Remove c++14 generic lambda to keep compiler requirement at c++11.
No regressions on piglit or vtk test suites.
Tested-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
CC: mesa-stable@lists.freedesktop.org
(cherry picked from commit 0b80b02502)
The workaround causes a massive performance decrease on 1-SE parts.
(Cape Verde, Hainan, Oland)
The performance regression is already part of 17.0 and 17.1.
v2: check tess_uses_prim_id
Cc: 17.0 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 391673af7a)
[Emil Velikov: s/tcs_tes_uses_prim_id/tess_uses_prim_id/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
A number of internal VMware apitrace traces image comparisons fail with
dri3 because the viewport transformation becomes incorrect after an X
drawable resize. The incorrect viewport transformation sometimes persist
until the second draw-call after a swapBuffer.
Comparing with the dri2 glx code there are a couple of places where dri2
invalidates the drawable in the absence of server-triggered invalidation,
where dri3 doesn't do that. When these invalidation points are added to
dri3, the image comparisons become correct.
v2:
Addressed review comment by Michel Dänzer.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-and-tested-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 1253d58983)
This fixes a performance issue with the shader cache that delayed Gallium
shader create calls until draw calls.
I'd like this in stable, but it's not a showstopper.
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 2ec50f98a9)
BGRA8 image stores on Fermi don't work, which results in breaking
PBO downloads, such that they always return 0x0. Discovered this
through a glamor bug, and confirmed it does indeed break a good number
of piglit tests such as spec/arb_pixel_buffer_object/pbo-read-argb8888
Fixes: 8e7893eb53 ("nvc0: add support for BGRA8 images")
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 245912b684)
glXGetCurrentDisplay() has been broken for years and nobody noticed until
recently. This change adds a new XMesaGetCurrentDisplay() that the GLX
emulation API can call, just as we did for glXGetCurrentContext().
Tested by hacking glxgears to call glXGetCurrentContext() before and
after glXMakeCurrent() to verify the return value is NULL beforehand and
the same as the opened display afterward.
Also tested by Tom Hudson with his tests programs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100988
Cc: mesa-stable@lists.freedesktop.org
Tested-by: Tom Hudson <tom.hudson.phd@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit c6ba85a8c0)
We were linking src/glx with -Bsymbolic, but not the classic/gallium X11
libGL.so.
But it's always a good idea to build all libGL.so and all DRI drivers
with -Bsymbolic, otherwise they might resolve symbols from the 3rd party
application executable or shared libraries, which is _never_ what we
want.
In particular, this can happen when intercepting OpenGL calls with
apitrace, before
63194b2573
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit ce5e83b8a0)
This function never occurs in the callchain of a GL function. It occurs
only in the callchain of eglCreate*Surface and the analogous paths for
GLX. Therefore, even if a thread does have a bound GL context,
emitting a GL error here is wrong. A misplaced GL error, when no GL
call is made, can confuse clients.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9d996e94fb)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/intel_fbo.c
The cpu_fini() call pushes the buffer back into the GPU domain, which needs
to be done for all buffers, not just the ones with CPU written content. The
etnaviv kernel driver currently doesn't validate this, but may start to do
so at a later point in time. If there is a temporary resource the fini needs
to happen before the RS uses this one as the source for the upload.
Also remove an invalid comment about flushing CPU caches, cpu_fini takes
care of everything involved in this.
Fixes: c9e8b49b88 ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
(cherry picked from commit cab5996c26)
