Using the constant cache for reads isn't going to work for scratch
reads (variably-indexed arrays or register spills), as these aren't
constant at all.
Also, in the new VS backend, use the proper message number for OWord
Dual Block Write messages. It's now 10, instead of 9.
+205 piglits.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
While reviewing some compiler cleanups I'd sent out, Paul noticed that
tree grafting wasn't taking "out" parameters into account.
Further investigation revealed that it isn't strictly necessary: ir_call
ends basic blocks, and tree grafting currently only operates on basic
blocks. So calls already kill grafts.
However, just to be safe, this patch makes "out" parameters explicitly
kill grafts. Paul and I both prefer this. It's a bit clearer.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The 'mode' param is a bitset of GL_MAP_READ_BIT, GL_MAP_WRITE_BIT.
A future commit will perform buffer resolves in intel_region_map(). So,
even though the access mode is irrelevant to the GTT, the extra
information allows us to intelligently avoid unneccessary buffer resolves.
Signed-off-by: Chad Versace <chad@chad-versace.us>
Add the following to the vtbl:
hiz_resolve_depthbuffer
hiz_resolve_hizbuffer
For all drivers for which HiZ is not enabled, the methods are set to be
no-ops. If HiZ is enabled, the methods are currently to set to empty
stubs.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad@chad-versace.us>
intel_context::gen field is set by intelInitContext(). So, by calling
intelInitContext() before initializing the vtable, we can can construct
different vtables for different gens.
Specifically, this allows us to set the HiZ operations to be no-ops for
contexts for which HiZ is not enabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad@chad-versace.us>
During anholt's MapTextureImage refactoring, the call to
intel_tex_image_s8z24_create_renderbuffers was missplaced. It needs to
occur *after* the miptree is allocated.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad@chad-versace.us>
Don't dereference the color buffer if one isn't attached.
This fixes the following Piglit tests in my experimental HiZ branch:
glean/logicOp
glean/paths
Note: This is a candidate for the stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad@chad-versace.us>
This is necessary because i965 will need to call vbo_bind_array() when
cleaning up after a buffer resolve meta-op.
Detailed Explanation
--------------------
The vbo module tracks vertex attributes separately from the gl_context.
Specifically, the vbo module maintins vertex attributes in
vbo_exec_context::array::inputs, which is synchronized with
gl_context::Array::ArrayObj::VertexAttrib by vbo_bind_array().
vbo_draw_arrays() calls vbo_bind_array() to perform the synchronization
before calling the real draw call, vbo_context::draw_arrays.
Intel hardware accomplishes buffer resolves with a meta-op. Frequently,
that meta-op must be performed within glDraw* in the moment immediately
before the draw occurs (The hardware designers hate us...). After
performing the meta-op, but before calling vbo_bind_array(), the
gl_context's vertex attributes will have been restored to their original
state (that is, their state before the meta-op began), but the vbo
module's vertex attribute are those used in the last meta-op. Therefore we
must manually synchronize the two with vbo_bind_array() before continuing
with the original draw command (that is, the one requested with glDraw*).
See brw_predraw_resolve_buffers(), which will be added in a future commit.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
This hook allows the driver to prepare for a glBegin/glEnd.
i965 will use the hook to avoid avoid recursive calls to FLUSH_VERTICES
during a buffer resolve meta-op.
Detailed Justification
----------------------
When vertices are queued during a glBegin/glEnd block, those vertices must
of course be drawn before any rendering state changes. To enusure this,
Mesa calls FLUSH_VERTICES as a prehook to such state changes. Therefore,
FLUSH_VERTICES itself cannot change rendering state without falling into
a recursive trap.
This precludes meta-ops, namely i965 buffer resolves, from occuring while
any vertices are queued. To avoid that situation, i965 must satisfy the
following condition: that it queues no vertex if a buffer needs resolving.
To satisfy this, i965 will use the PrepareExecBegin hook to resolve all
buffers on entering a glBegin/glEnd block.
--------
v2: Don't add dd_function_table::CleanupExecEnd. Anholt and I discovered
that hook to be unnecessary.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
In some cases, Intel hardware requires that depth and stencil buffers be
separate. To accommodate swrast, i965 resorts to hackery that causes
a segfault in the fastpaths of draw_depth_stencil_pixels() and
read_depth_stencil_pixels().
The hack is that i965 sets framebuffer->Attachment[BUFFER_DEPTH].Renderbuffer
and framebuffer->Attachment[BUFFER_STENCIL].Renderbuffer to a dummy
renderbuffer for which the GetRow accessors and friends are null. The real
buffers are located at framebuffer->_DepthBuffer and framebuffer->_Stencilbuffer.
To fix the segault, this patch skips the fastpath if
framebuffer->Attachment[BUFFER_DEPTH].Renderbuffer->GetRow is null.
Note: This is a candidate for the 7.11 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
When i965 uses (in the near future) meta-ops to perform buffer resolves,
the meta-op stack exceeds depth 2. I bumped it to 8 because... 8 is bigger
than 2, but not too big.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
If this flag is set, then _mesa_meta_begin/end will save/restore the state of
GL_SELECT and GL_FEEDBACK render modes.
Intel's future buffer resolve meta-ops will require this, since buffer resolves
may occur when the GL_RENDER_MODE is GL_SELECT.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
This is required in order for meta-ops to save/restore the GL_RENDER_MODE
state.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
I initially produced the patch using this bash command:
for file in {intel,i915,i965}/*.{c,cpp,h}; do [ ! -h $file ] && sed -i
's/GLboolean/bool/g' $file && sed -i 's/GL_TRUE/true/g' $file && sed -i
's/GL_FALSE/false/g' $file; done
Then I manually added #include <stdbool.h> to fix compilation errors,
and converted a few functions back to GLboolean that were used in core
Mesa's function pointer table to avoid "incompatible pointer" warnings.
Finally, I cleaned up some whitespace issues introduced by the change.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Chad Versace <chad@chad-versace.us>
Acked-by: Paul Berry <stereotype441@gmail.com>
It was previously under gpu_shader4, but I'm pretty sure everyone's
going to be doing GLSL 1.30 first (since gpu_shader4 is basically 1.30
plus a bunch of extra stuff).
Fixes piglit glsl-1.30/texel-offset-limits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When saving the active program in _mesa_meta_begin, it was actually
saving the fragment program instead. This means that if the
application binds a program that only has a vertex shader then when
the meta saved state is restored it will forget the bound program.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41969
Reviewed-by: Chad Versace <chad@chad-versace.us>
This is a step towards providing a direct route for drivers accepting
GLSL IR for codegen. Perhaps more importantly, it runs the fixed
function fragment program through the GLSL IR optimization. Having
seen how easy it is to make ugly fixed function texenv code that can
do unnecessary work, this may improve real applicatinos.
On converting fixed function programs to generate GLSL, the linker
became cranky that we were trying to make something that wasn't a
linked vertex+fragment program. Given that the Mesa GLES2 drivers
also support desktop GL with EXT_sso, just telling the linker to shut
up seems like the easiest solution.
As pointed out by Michel Dänzer, gcc -lstdc++ doesn't work on all systems,
because it may require other libraries which are only pulled in implicitly
by g++. And libstdc++ is available only with GNU compiler.
Use c++ compiler for linking and remove redundant LDFLAGS += -lstdc++
all over the tree.
In addition to setting up the flags correctly, this renames the
generated libraries to ensure they get 'Mangled' in the name.
This is very useful for distros and the like, where mangled Mesa
and non-mangled GL libraries typically need to be installed
side-by-side.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Scalar instruction that need to write to the xyz components of a
register must reserve the RGB instruction slot for a REPL_ALPHA
instruction. With this commit, the scheduler will attempt to free
the RGB slot by moving the write to the w component of a register.
Introuduce a simple function called copy_data to do the image data copy
stuff for all the save_CompressedTex*Image function. The function check
the NULL data case to avoid some potential segfault. This also would
make the code a bit simpler and less redundance.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Fix is in {read,draw}_depth_stencil_pixels(). If depthRb == stencilRb,
then it is redundant to check depthRb->x *and* stencilRb->x.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
For glReadPixels, the user supplied pixels have format
GL_UNSIGNED_INT_24_8. But, when the depthstencil buffer's format was
MESA_FORMAT_S8_Z24, the fastpath read from the buffer without reordering
the depth and stencil bits. To fix this, this patch just skips the
fastpath when the format is not MESA_FORMAT_Z24_S8.
The problem and fix for glWritePixels is analagous.
Fixes the Piglit tests below on i965/gen6 and causes no regressions.
general/depthstencil-default_fb-drawpixels-24_8
general/depthstencil-default_fb-readpixels-24_8
EXT_packed_depth_stencil/fbo-depthstencil-GL_DEPTH24_STENCIL8-drawpixels-24_8
EXT_packed_depth_stencil/fbo-depthstencil-GL_DEPTH24_STENCIL8-readpixels-24_8
Note: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad@chad-versace.us>
This is required for an accurate implementation of d3d1x's
CheckFormatSupport query.
It also seems generally useful for state trackers, which could
choose alternative rendering paths or formats if blending would
come at a significant performance loss.
The texture semaphore allows for prefetching of texture data. On my
RV515, this increases the FPS of Lightsmark by 33% (This is with the
reg_rename pass enabled, which is enabled in the next commit).
There is a new env variable now called RADEON_TEX_GROUP, which allows
you to specify the maximum number of texture lookups to do at once.
The default is 8, but different values could produce better results
for various application / card combinations.
We no longer emit full instructions immediately after they have been
merged. Instead merged instructions are added to the ready list and
the scheduler can commit them whenever it wants.
This is supported by the pseudo-code on pages 27 and 28 (pages 41 and
42 of the PDF) of the OpenGL 2.1 spec. The last part of the
implementation of ArrayElement is:
if (generic attribute array 0 enabled) {
if (generic vertex attribute 0 array normalization flag is set, and
type is not FLOAT or DOUBLE)
VertexAttrib[size]N[type]v(0, generic vertex attribute 0 array element i);
else
VertexAttrib[size][type]v(0, generic vertex attribute 0 array element i);
} else if (vertex array enabled) {
Vertex[size][type]v(vertex array element i);
}
Page 23 (page 37 of the PDF) of the same spec says:
"Setting generic vertex attribute zero specifies a vertex; the
four vertex coordinates are taken from the values of attribute
zero. A Vertex2, Vertex3, or Vertex4 command is completely
equivalent to the corresponding VertexAttrib* command with an
index of zero."
Fixes piglit test attribute0.
NOTE: This is a candidate for stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Don't allow any "CPU" buffers to be allocated by the pb_fenced
buffer manager, since we can't protect against failures during
buffer validation.
Also, add an extra slab buffer manager to allocate buffers from
the kernel if there is a failure to allocate from our big buffer pool.
The reason we use a slab manager for this, is to avoid allocating
many very small buffers from the kernel.
v2: Increased VMW_MAX_BUFFER_SIZE and fixed some comments.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
