No shader-db or fossil-db changes on any Intel platform. This ends up
begin helpful in "intel/brw: Use range analysis to optimize fsign."
v2: Add integer CSEL support
v3: Massive simplification (-20 lines!) of constant propagation
logic. Suggested by Ken. Add missing CSEL case in supports_src_as_imm.
Noticed by Ken.
v4: While MAD can mix F and HF sources on some platforms, CSEL
cannot. Found by skqp on TGL.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29095>
Gfx9 can only have F, but newer GPUs can have F, HF, *D, or *W. The
source and destination types must still match in size.
v2: Simplify the float vs integer logic. Suggested by Ken.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29095>
This bit from the comment should have been a big red flag:
There are currently zero instances of fsign(double(x))*IMM in
shader-db or any test suite, so it is hard to care at this time.
The implementation of that path was incorrect. The XOR instructions
should be predicated like the OR instruction in the non-multiplication
path. As a result, dsign(zero_value) * x will not produce the correct
result.
Instead of fixing this code that is never exercised by anything, replace
it with the simple lowering in NIR.
Ironically, the vec4 implementation is correct. The odds of encountering
an application that is performace limited by dsign performance in vertex
processing stages on Ivy Bridge or Haswell is infinitesimal.
No shader-db changes on any Intel platform.
v2: Delete 's' in emit_fsign as it is now unused.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29095>
This bit from the comment should have been a big red flag:
There are currently zero instances of fsign(double(x))*IMM in
shader-db or any test suite, so it is hard to care at this time.
The implementation of that path was incorrect. The XOR instructions
should be predicated like the OR instruction in the non-multiplication
path. As a result, dsign(zero_value) * x will not produce the correct
result.
Instead of fixing this code that is never exercised by anything, replace
it with the simple lowering in NIR.
No shader-db or fossil-db changes on any Intel platform.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29095>
Some commas were being skipped, according to history as an attempt
to elide BAD_FILEs, but we still print them, so be consistent. Also
for instructions without any sources, the trailing comma was always
being printed. Fix that too.
Example of instruction output before the change
halt_target(8) (null):UD,
send(8) (mlen: 1) (EOT) (null):UD, 0u, 0u, g126:UD(null):UD NoMask
and after it
halt_target(8) (null):UD
send(8) (mlen: 1) (EOT) (null):UD, 0u, 0u, g126:UD, (null):UD NoMask
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29114>
It was the default to show register pressure for each instruction,
but it gets in the way of cleaner diffs before/after an optimization pass.
Add INTEL_DEBUG=reg-pressure option to show it again.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29114>
The sequential IP cause noise when diffing before/after a pass that
either add or remove instructions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29114>
The debug identifier is put into the captured buffers for error
capture. This helps us figure out what version of the driver people
are running when encountering a GPU hang. This identifier has the
git-sha1 + driver name.
libintel_dev is also a dependency of the compiler so any change to the
git-sha1 also triggers recompile which we want to avoid.
This changes moves the debug identifier to src/intel/common which
drivers already depend on, so the compiler is not affected anymore.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11136
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29128>
Running
KHR-GL46.sparse_texture_clamp_tests.SparseTextureClampLookupColor test
with Zink on Anv we run into an assert :
assert(inst->mlen <= MAX_SAMPLER_MESSAGE_SIZE * reg_unit(devinfo));
Turns out we've not covered all the cases in the SIMD lowering.
It's a bit of a shame to have both files reproduce the same logic.
Will try to think of a better way to extract the layout of the a send
message but that'll be a much bigger rework.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29118>
Any drivers which use vk_spirv_to_nir() now no longer need to build a
caps table manually.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Iván Briano <ivan.briano@intel.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28905>
It's just a vtn_fail_if() and there's no actual cap for it. It's not
really gaining us much to have the check.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Iván Briano <ivan.briano@intel.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28905>
Also capture all buffers so that we can compare replay run with the
original error state.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27594>
We need to add the plane index to compute the address from which to
load the descriptor (anv_sampled_image_descriptor in this case).
This was likely broken before we added direct descriptor support so
that gets a stable backport.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11125
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29111>
This will make easy to add Xe KMD support and reduce code duplication.
No changes in behavior are expected here.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29077>
The platform version check to return the OA format was duplicated
in a few places, so adding a function and dropping this duplication.
While at it, already making it future proof for Xe KMD support and
split i915 specific code to its own file.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29077>
Now that perf config and context are freed we don't need this rallocs
contexts.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29077>
There was no function to free resources allocated in intel_perf_config
or it self.
Other callers will be added in separated patches.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29077>
Remove the GPDP and GPDP2 entrypoints, and fill the properties
at device initialization time instead.
Move DRM master major/minor gathering before get_properties() and WSI
init, as the latter uses the results gathered by the former.
Reviewed-by: Julia Tatz <tatz.j@northeastern.edu>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27717>
The runtime grew support for VkPhysicalDevicePresentationPropertiesANDROID,
so we can use that now and get rid of anv_GetPhysicalDeviceProperties2.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27717>
For CMP/CMPN, use src0 type if destination is null otherwise get the
src0 type register with destination register size.
This fixes dEQP-VK.glsl.builtin_var.frontfacing.* tests cases on Xe2+.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28679>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 806281f61f ("anv: add a new reserved pool for capture/release")
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29057>
Fixes fs-uint-to-float-of-extract-int8.shader_test and
fs-uint-to-float-of-extract-int16.shader_test added by piglit!883.
v2: Expand the comment explaining the potential problem. Suggested by
Caio.
Fixes: e6022281f2 ("intel/elk: Rename files to use elk prefix")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27891>
Fixes fs-uint-to-float-of-extract-int8.shader_test and
fs-uint-to-float-of-extract-int16.shader_test added by piglit!883.
No shader-db or fossil-db changes on any Intel platform.
v2: Expand the comment explaining the potential problem. Suggested by
Caio.
Fixes: 29ce110be6 ("i965/fs: Remove extract virtual opcodes.")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27891>
This seems to be a simple copy-paste mistake. It makes sense to or-assign
surface offsets because we clear the actual offset part with a mask first,
but sampler offsets should be just assigned instead.
Fixes: 7c76125d ("anv: use 2 different buffers for surfaces/samplers in descriptor sets")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/10790
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29019>
Xe KMD will not provide a enum with formats, instead UMD needs set
a uint64_t with type, counter_sel, counter_size and bc_report for the
format.
So here changing from int to uint64_t, it do not causes any issues for
i915 and makes it ready for Xe KMD.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28997>
