* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_get_frequency): handle drivers that return
a channel # instead of a frequency
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3189 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
- (nm_ap_new_fake_from_connection): pass band to channel_to_freq()
- (freq_to_channel): handle split band tables
- (channel_to_freq): handle split band tables, take a band argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3188 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Base the NMNetlinkMonitor class on libnl instead of hand-rolled netlink.
* src/nm-netlink-monitor.c
src/nm-netlink-monitor.h
- Remove handrolled netlink, use libnl instead
* src/nm-device-802-3-ethernet.c
- (constructor, nm_device_802_3_ethernet_carrier_off,
nm_device_802_3_ethernet_carrier_on): use new names
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3181 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Bump requirement for libnl to 1.0-pre8 (which works with newer kernels
and fixes memory leaks)
* src/nm-netlink.c
- (nm_netlink_get_default_handle): handle new versions of libnl that
automatically handle the netlink PID
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3178 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Michael Biebl <biebl@debian.org>
* configure.in
src/ppp-manager/Makefile.am
- fix up install dir of pppd plugin
- clean up configure.in a bit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3176 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
src/NetworkManagerSystem.c
- (new_nl_handle): ensure that the same netlink pid is never chosen
twice (gnome.org #491047)
- Make more robust against allocation-related failures should they occur
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-umts-device.c (real_act_stage1_prepare): Flash the
* modem (drop DTR)
before doing anything else.
(init_modem): Move modem initialization here.
* src/nm-serial-device.c (ppp_state_changed): React on pppd
* state changes.
(nm_serial_device_flash): Implement.
* src/ppp-manager/nm-ppp-manager.c (name_owner_changed): Fix the
* typoes: the state
changes signal is "StateChanged" and not "Status".
(ppp_exit_code, ppp_status_changed): Remove the debug output,
it's working fine now.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3146 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-config.c
- (nm_supplicant_config_add_setting_wireless_security): reorganize a bit
to only send some options when they make sense; also send phase2
option to the supplicant (possible fix for rh #399631)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3143 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Change the
arguments: This whole file shouldn't really know anything about
NMDevices, it
should deal only with device interfaces. Devices might have
different ifaces for
different stuff and this place shouldn't know anything about it.
* src/NetworkManagerPolicy.c: Get rid of leftover global
* variable global_policy.
(global_state_changed): Implement. In the current NM it's not
really important,
but will be required in the case of multiple active devices. (Or
even better,
if stuff like that gets moved out from NM).
* src/vpn-manager/nm-vpn-connection.c
* (connection_state_changed): Don't call
nm_system_device_set_from_ip4_config() directly, use
nm_device_set_ip4_config()
instead.
* src/nm-device.c: Add a ip_face protected member. It's used for
* 'multi-interface'
devices like serial devices (ttyS0 and ppp0 for example).
(nm_device_get_ip_iface): Implement. Default to the device iface
if ip_iface is not
set.
(nm_device_set_ip_iface): Implement.
(nm_device_activate_stage5_ip_config_commit): Move all the extra
actions that happen
after setting ip4_config from here ...
(nm_device_set_ip4_config): ... to here. The reason behind it is
that no other code
than this function should call
nm_system_device_set_from_ip4_config() because no
other code has enough information on which arguments to use. So
instead, other code
could just set the new ip4 config using this function and
everyone is happy.
* src/nm-umts-device.c: Store the pending ids so that we can
* remove pending actions
if we happen to get deactivated while something is pending.
(automatic_registration): Handle the response that indicates
pending network
registration and wait until the pending registration is done.
(real_deactivate_quickly): If there's a pending operation,
cancel it.
* src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when
* the iface is up ...
(real_deactivate_quickly): ... and remove it when it's down.
(nm_serial_device_get_reply): Return the timeout id so that the
callers can remove
it if needed.
(nm_serial_device_wait_for_reply): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Casey Harkins <caseyharkins@gmail.com>
* src/nm-openvpn-service-openvpn-helper.c
src/nm-openvpn-service.c
properties/nm-openvpn.c
auth-dialog/main.c
- Fix up so it mostly works
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3140 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-umts-device.c (dial_done): Fix the typoes in warnings.
(get_network_done): Remove newline, nm_info() does it already.
(real_act_stage1_prepare): Turn the modem echo off.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): In case of serial
device, set the route to the device interface. This is a hack.
* src/nm-serial-device.c (nm_serial_device_send_command_string):
* Only append carriage
return, no need for a new-line.
(ppp_ip4_config): Store the ip4 config to be set in the next
stage.
Change the device iface here (ugh).
(real_act_stage4_get_ip4_config): Implement.
(real_deactivate_quickly): Free the pending ip4 config if it's
still pending.
Restore the device iface.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check): Do
* nothing if the active
device is not wired or wireless (eg, automatically upped)
device.
* src/ppp-manager/nm-ppp-manager.c (ip4_config_get): Don't make
* the config secondary,
it isn't.
(nm_ppp_manager_start): Don't let pppd to set the default route,
we want to do it.
* src/nm-hal-manager.c (get_creator): Make sure the device has
* required capability
before calling it's is_device_fn().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3137 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
