The motivation behind this is to add some self-documentation in the code
about how each CAP can be used.
The idea is:
- enum pipe_cap is only valid in get_param
- enum pipe_capf is only valid in get_paramf
Which CAPs are floating-point have been determined based on how everybody
except svga implemented the functions. svga have been modified to match all
the other drivers.
Besides that, the floating-point CAPs are now prefixed with PIPE_CAPF_.
The old count_uniform_size::num_shader_uniforms was actually
calculating the number of components used. Multiplying by 4 when
setting gl_shader::num_uniform_components caused us to count 4x as
many uniform components as were actually used.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42930
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42966
Acked-by: Marek Olšák <maraeo@gmail.com>
Tested-by: Vinson Lee <vlee@vmware.com>
Tested-by: Pavel Ondračka <pavel.ondracka@email.cz>
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
Regresses one Piglit test: bugs/fdo10370.
I'm not enabling HiZ for gen7 yet because it causes a mysterious
performance regression.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For depthstencil renderbuffers, we were using separate stencil only if the
hardware required it. Since the performance gains from HiZ is so high, we
should always use separate stencil if the hardware supports it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
I implemented functions for horizontal/vertical alignment units separately
because I find it easier to read that way...especially with all the
corner-cases.
[chad] Corrected the vertical alignment calculation by checking for
depthstencil formats.
v2:
- Fix typos in intel_horizontal_texture_alignment_unit():
s/height/width/ and s/VALIGN/HALIGN.
- Remove special case for compressed formats in
intel_get_texture_alignment unit(). Compressed formats are already
handled in the halign and valign functions.
- Replace check ``_mesa_is_depth_format(...) ||
_mesa_is_depthstencil_format(...)`` with explcitit checks against
GL_DEPTH_COMPONENT and GL_DEPTH_STENCIL.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This allows us to replace all the calls to
intel_get_texture_alignment_unit() with a single call at miptree creation.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
When a depth texture is first attached to framebuffer, allocate a HiZ
miptree for it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
After brw_try_draw_prims() emits a batch, mark that the depth buffer needs
a depth resolve if the buffer was written to and if it has an accompanying
HiZ buffer.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Resolve all buffers that will be mapped by intelSpanRenderStart. This
comprises resolving the depth buffer of each enabled texture and of the
read and draw buffers.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Factor the mapping loops from intelSpanRenderStart() into
intel_span_map_buffers(). This in preparation for the next commit,
which resolves the buffers before mapping.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Before emitting primitives in brw_try_draw_prims(), resolve the depth
buffer's HiZ buffer and resolve the depth buffer of each enabled depth
texture.
v2: [anholt] The driver no longer validates drm bo's, so update a comment
to reflect that.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
To do so, we must resolve all buffers on entering a glBegin/glEnd block.
For the detailed explanation, see the Doxygen comments in this patch.
v2:
- Fix typo: s/enusure/ensure/.
- In brwPrepareExecBegin(), do the same resolves as done by
brw_predraw_resolve_buffers().
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
A lot of the state manipulation is handled by the meta-op state setup.
However, some batches need manual intervention.
v2:
Do not special-case the 3DSTATE_DEPTH_STENCIL.Depth_Test_Enable bit
for HiZ in gen6_upload_depth_stencil(). The HiZ meta-op sets
ctx->Depth.Test, just read the value from that.
v3:
Add a new dirty flag, BRW_STATE_HIZ, for brw_tracked_state. Flag it
immediately before and after executing the HiZ operation in
gen6_resolve_slice(). Add the flag to the the dirty bits for the
following state packets:
gen6_clip_state
gen6_depth_stencil_state
gen6_sf_state
gen6_wm_state
v4:
- Add BRW_NEW_STATE_HIZ to the dirty bit table in brw_state_upload.c.
This is needed for INTEL_DEBUG=state.
- Align brw dirty bit for gen6_depth_stencil_state.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Some state batches also need to be manipulated. That's done in the next
commit.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
brw_context::hiz contains state needed to perform HiZ meta-ops and
indicates if a HiZ operation is currently in progress.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add the following functions:
intel_renderbuffer_resolve_hiz
intel_renderbuffer_resolve_depth
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add functions that
- set a miptree slice as needing a resolve
- resolve a single slice of a miptree
- resolve all slices of a miptree
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is a map of miptree slices to needed resolves.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is a map of miptree slices to needed resolves, implemented as
a linked list. A future commit will embed such a list in
intel_mipmap_tree.
If you think I'm crazy to put a list in a miptree, read the Doxygen in
this patch for intel_resolve_map.
v2: [anholt] Move Doxygen from functin prototypes to definitions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Now that intel_renderbuffer::region has been replaced with a miptree, the
HiZ functions region parameter must be replaced with a miptree parameter.
Change the return type from bool to void.
Rename the 'depth' parameter to 'layer', because it will correspond to
irb->mt_layer.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Remove the following functions:
i830_hiz_resolve_noop
i915_hiz_resolve_noop
brw_hiz_resolve_noop
My original strategy for how intel->vtbl.resolve_*buffer was used has
substantially changed. The above functions are no longer called in the
current strategy.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is required to correctly implement HiZ for mipmapped and
multi-layered textures.
v2: Accomodate refcount fixes in intel_process_dri2_buffer_*() that were
introduced in v2 of commit
intel: Replace intel_renderbuffer::region with a miptree [v2]
Reviewed-by: Eric Anholt <eric@anholt>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For depthstencil textures using separate stencil, we embedded a stencil
buffer in intel_texture_image. The intention was that the embedded stencil
buffer would be the golden copy of the texture's stencil bits. When
necessary, we scattered/gathered the stencil bits between the texture
miptree and the embedded stencil buffer.
This approach had a serious deficiency for mipmapped or multi-layer
textures. Any given moment the embedded stencil buffer was consistent with
exactly one miptree slice, the most recent one to be scattered. This
permitted tests of type A to pass, but broke tests of type B.
Test A:
1. Create a depthstencil texture.
2. Upload data into (level=x1,layer=y1).
3. Read and test stencil data at (level=x1, layer=y1).
4. Upload data into (level=x2,layer=y2).
5. Read and test stencil data at (level=x2, layer=y2).
Test B:
1. Create a depthstencil texture.
2. Upload data into (level=x1,layer=y1).
3. Upload data into (level=x2,layer=y2).
4. Read and test stencil data at (level=x1, layer=y1).
5. Read and test stencil data at (level=x2, layer=y2).
v2:
Only allocate stencil miptree if intel->must_use_separate_stencil,
because we don't make the conversion from must_use_separate_stencil to
has_separate_stencil until commit
intel: Use separate stencil whenever possible
v3:
Don't call ChooseNewTexture in intel_renderbuffer_wrap_miptree() in
order to determine the renderbuffer format. Instead, pass the format as
a param to that function.
CC: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is in preparation for properly implementing glFramebufferTexture*()
for mipmapped depthstencil textures. The FIXME comments deleted by this
patch give a rough explanation of what was broken.
This refactor does the following:
- In intel_update_wrapper() and intel_wrap_texture(), change the
parameters to prepare to remove functions' dependency on
gl_texture_image.
- Move the call to intel_renderbuffer_set_draw_offsets() from
intel_render_texture() into intel_udpate_wrapper().
Each time I encounter those functions, I dislike their vague names.
(Update which wrapper? What is wrapped? What is the wrapper?). So, while
I was mucking around, I also renamed the functions.
v2:
In addition to the ``GLenum internal_format`` parameter to
intel_wrap_miptree(), add a ``gl_format format`` parameter. This
removes the need to recalculate for the true format from
internal_format with ChooseNewTextureFormat, which was just weird.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is a small helper function that asserts that a given level and layer
are valid for a miptree. I will be extensively using it in the future
miptree HiZ functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Since the renderbuffer tracks the miptree level and layer that it wraps,
the 'tex_image' and 'zoffset' params are no longer needed to calculate the draw
offsets.
Not only are they no longer needed, but their presence would prevent
calculating the renderbuffer draw offsets in situations where there were
no texture image. Such situations will occur during the HiZ meta-op and
during scatter/gather of separate stencil textures.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
TODO: Make v2 for kwg.
Add two fields to intel_renderbuffer:
mt_level
mt_layer
Multiple renderbuffers may simultaneously wrap a single texture and each
provide a different view into that texture. [Consider
glFramebufferTextureLayer()]. The new fields indicate which slice of the
miptree is wrapped by the renderbuffer.
The buffer resolve operations, to be introduced in the future, require
these fields in order to resolve the correct slice in the miptree.
To add the fields, it was necessary to replace the type of some function
parameters from gl_texture_image to gl_renderbuffer_attachment.
v2: [kwg] Replace confusing condition `CubeMapFace > 0` with the more
sensible `Target == GL_TEXTURE_CUBE_MAP`.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For all texture targets except GL_TEXTURE_CUBE_MAP, the 'nr_images' and
'depth' fields of intel_mipmap_level were identical. In the exceptional
case, nr_images == 6 and depth == 1.
It is simple to determine if a texture is a cube or not, so the presence
of two fields here was not helpful. Worse, it was confusing. When we
eventually implement GL_ARB_texture_cube_map_array, this mess would have
become even more confusing.
This patch removes 'nr_images' and assigns to 'depth' a consistent
meaning: depth is the number of 2D slices at each miplevel. The exact
semantics of depth varies according to the texture target:
- For GL_TEXTURE_CUBE_MAP, depth is 6.
- For GL_TEXTURE_2D_ARRAY, depth is the number of array slices. It is
identical for all miplevels in the texture.
- For GL_TEXTURE_3D, it is the texture's depth at each miplevel. Its
value, like width and height, varies with miplevel.
- For other texture types, depth is 1.
As a consequence, parameters were removed from the following function
signatures:
intel_miptree_set_level_info
Remove 'nr_images'.
i945_miptree_layout
brw_miptree_layout_texture
brw_miptree_layout_texture_array
Remove 'slices'.
v2:
- Replace "It's" with "Its".
- Remove all hunks in intel_fbo.c. The hunks were spurious and sneaked
in during a rebase.
- Remove unneeded hunk in intel_tex_map_image_for_swrast(). It was
a little refactor of the for-loop's upper bound.
v4:
In intel_miptree_get_image_offset(), document the conditions under
which different if-branches are taken.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
They're not supported by hw directly, but it's easy to emulate
them with a shader swizzling fixup.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[danvet: The important thing is to write a 1 to the unused alpha
channel, the ddx is relying on this for render accel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the gallium driver doesn't support PIPE_FORMAT_R16G16B16A16_SNORM
the call to st_choose_renderbuffer_format() would fail and we'd generate
an GL_OUT_OF_MEMORY error. We'd never get to the subsequent code that
handles software/malloc-based renderbuffers.
Add a special-case check for PIPE_FORMAT_R16G16B16A16_SNORM which is used
for software-based accum buffers. This could be fixed in other ways but
it would be a much larger patch. st_renderbuffer_alloc_storage() could
be reorganized in the future.
This fixes accum buffer allocation for the svga driver.
Note: This is a candidate for the 7.11 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Extract the body of the inner loop into a new function,
intel_miptree_copy_slice().
This is in preparation for adding support for separate stencil and HiZ to
intel_miptree_copy_teximage(). When copying a slice of a depthstencil
miptree that uses separate stencil, we will also need to copy the
corresponding slice of the stencil miptree. The easiest way to do this
will be to call intel_miptree_copy_slice() recursively. Analogous
reasoning applies to copying a slice of a depth miptree with HiZ.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add a new field, intel_mipmap_level::slice, and move the offset fields
into it. Also add some much needed documentation for these fields.
Before this patch, a separate array was allocated for the
intel_mipmap_level::{x,y}_offsets. This was just silly; it incurred an
extra call to malloc and diminished memory locality.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Essentially, this patch just globally substitutes `irb->region` with
`irb->mt->region` and then does some minor cleanups to avoid segfaults
and other problems.
This is in preparation for
1. Fixing scatter/gather for mipmapped separate stencil textures.
2. Supporting HiZ for mipmapped depth textures.
As a nice benefit, this lays down some preliminary groundwork for easily
texturing from any renderbuffer, even those of the window system.
A future commit will replace intel_mipmap_tree::hiz_region with a miptree.
v2:
- Return early in intel_process_dri2_buffer_*() if region allocation
fails.
- Fix double semicolon.
- Fix miptree reference leaks in the following functions:
intel_process_dri2_buffer_with_separate_stencil()
intel_image_target_renderbuffer_storage()
v3:
- [anholt] Fix check for hiz allocation failure. Replace
``if (!irb->mt)` with ``if(!irb->mt->hiz_region)``.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This function creates a miptree that is suitable as storage for
a non-texture renderbuffer.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
