The offset of dest should be 40, not 48.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: 486c341769 ("panfrost: Add architecture description XML for v10")
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33371>
(cherry picked from commit 38a3cd8c76)
Those were supposed to use BITFIELD_BIT.
Fixes: 2237cff1af ("panfrost: Report default value for GROUP_PRIORITIES_INFO in drm-shim")
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33371>
(cherry picked from commit 05c2abcfea)
These have been switching between failing and passing recently. Not
really sure what's going on here, but we don't want the CI to flip
randomly between failing and passing, so let's mark them as flakes.
Backport-to: 25.0
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33381>
(cherry picked from commit 4d86a1c928)
This has probably no incidence on anything else but human-visible names
but let's fix it anyway.
Fixes: ef3091736c ("ci: use CI_PROJECT_NAME for artifacts name")
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32927>
(cherry picked from commit 978c0989eb)
Vulkan defines the line rasterization to *always* use perpendicular
rather than aligned line ends (unless otherwise specified by
VK_EXT_line_rasterization). So let's remove the code that conditionally
sets the bit, we always want the default value (0) here.
It might seem confusing because we kinda named this field wrong. It's
really about perpendicular vs aligned line ends. That's a cleanup we
might want to deal with later, but deleting the assignment is sufficient
to fix this issue. This is also what we do for v10.
This was probably just copied from the Gallium-driver, where this logic
is more or less correct.
Fixes: d970fe2e9d ("panfrost: Add a Vulkan driver for Midgard/Bifrost GPUs")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33373>
(cherry picked from commit 1d64095410)
The check in check_multiview_texture_target() whether numViews <= 0 (as
required by the OVR_multiview spec) is never triggered since it is only
called by frame_buffer_texture() when numviews > 1, as numviews of 0 is
passed in by non multiview FramebufferTexture functions. Such cases are
incorrectly treated as non-multiview attachments.
Tweak frame_buffer_texture() to take an extra bool argument "multiview"
to distinguish between a multiview call with numviews=0, and a
non-multiview call.
Fixes: 328c29d600 ("mesa,glsl,gallium: add GL_OVR_multiview")
Signed-off-by: James Hogan <james@albanarts.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33346>
(cherry picked from commit 7f493b45ae)
Fix the FBO attachment completeness test to ensure that multiview
attachments have all views referring to layers in range of the
underlying texture.
The OVR_multiview spec states:
Add the following to the list of conditions required for framebuffer
attachment completeness in section 9.4.1 (Framebuffer Attachment
Completeness):
"If <image> is a two-dimensional array and the attachment
is multiview, all the selected layers, [<baseViewIndex>,
<baseViewIndex> + <numViews>), are less than the layer count of the
texture."
Fixes: 328c29d600 ("mesa,glsl,gallium: add GL_OVR_multiview")
Signed-off-by: James Hogan <james@albanarts.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33346>
(cherry picked from commit 39491da1b6)
OVR_multiview requires OpenGL 3.0, so expose gl_ViewID_OVR builtin back
to GLSL 1.30 on OpenGL.
v2: Minor whitespace fix
Fixes: 328c29d600 ("mesa,glsl,gallium: add GL_OVR_multiview")
Signed-off-by: James Hogan <james@albanarts.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33346>
(cherry picked from commit b774b615d2)
In a 3-plane uncompressed YUV surface, only the chroma planes should use
MALI_PLANE_TYPE_CHROMA_2P plane_type or set secondary_pointer.
Fixes: 144f9324a3 ("panfrost: prepare v9+ to support YUV sampling")
Signed-off-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33104>
(cherry picked from commit 58bd1356cc)
On v10, only YUV 420 formats support center_y or center siting.
On previous HW versions, YUV 422 formats support center_y siting but not
center_x or center siting.
Fixes: 83c76cceaf ("panfrost: advertise YUV formats for valhall")
Signed-off-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33104>
(cherry picked from commit 23aa784c05)
if there is no heap with device-local and host-visible, then
rebar cannot exist. the previous detection did not account for
the rebar heap using the device-local fallback, which of course
would have the same size as the device-local heap and pass the threshold
check
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33359>
(cherry picked from commit 3064bfc312)
The blend count field is 4 bits not 3 bits.
Fixes: f2740ac69c ("pan/decode: Add support for decoding CSF")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33321>
(cherry picked from commit 438652654b)
Commit 2d3c50d484 ("panvk: Fix barriers in secondary cmdbufs w/o rp's")
started resetting the render flags we were relying on to decide to
clobber registers or not. Introduce a new field to restore that check.
Fixes: 2d3c50d484 ("panvk: Fix barriers in secondary cmdbufs w/o rp's")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33321>
(cherry picked from commit 127af6f38a)
The shader_modifies_coverage-flag is currently not set for PanVK. This
might lead to issues down the line, so ensure it's set correctly.
Fixes: 5544d39f44 ("panvk: Add a CSF backend for panvk_queue/cmd_buffer")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Benjamin Lee <benjamin.lee@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33300>
(cherry picked from commit 375116a3a0)
Enabling evaluate_per_sample in non-MSAA cases might cause issues and
hangs for subsequent ZS cases.
Therefore, only enable the flag when MSAA is active.
Fixes: 26d339ef8a ("panfrost: Generate Valhall Malloc IDVS jobs")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Benjamin Lee <benjamin.lee@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33300>
(cherry picked from commit 46256f3e39)
We now use `parse_debug_string` to parse debug strings from files, which
may have newlines in them. This change ensures that newline characters
are ignored during parsing, a similar change was made to
`parse_enable_string` for consistency.
Signed-off-by: Mark Collins <mark@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32906>
Currently the `nolrz` TU_DEBUG options are only checked during
device creation and image creation, respectively. This means that if
the options are enabled after the device/image is created, LRZ
will still be used. Similarly, if the options are disabled after the
device/image is created, LRZ will still be disabled.
This change moves the checks to the point where the LRZ is actually
used, allowing for runtime toggling of LRZ.
Signed-off-by: Mark Collins <mark@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32906>
This adds a new environment variable, TU_DEBUG_FILE, which can be used to
enable/disable various debug options at runtime via writing to a file. This
is useful for switching between different debug options (such as toggling
between SYSMEM/GMEM) without needing to restart the application.
Signed-off-by: Mark Collins <mark@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32906>
debian-testing is the critical path: the shortest possible job to build
exactly what we need to execute on hardware, and nothing else.
debian-build-testing exists to give us better coverage at the expense of
running longer.
Since the only jobs using r300 and Nine, and the only jobs using NVK,
are in post-merge stages which are manually triggered, move these builds
to debian-build-testing. This makes the critical path to those a little
longer, but we do get to make it shorter for everyone else just running
regular Marge jobs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33287>
Don't build every driver everywhere, just what we need right now.
r600 is temporarily excluded from release builds as it has a warning
which becomes an error.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33287>
