Icelake removed the PLN instruction for interpolating fragment shader
inputs, instead adding a special "Native Float" (NF) data type which
was a 66-bit floating point data type that could only be used with the
accumulator. On Tigerlake, they dropped NF support in favor of just
doing the interpolation with MAD instructions.
We stopped using NF years ago (commit 9ea90aae1e),
instead just using the fs_visitor::lower_linterp() pass to emit MADs.
Since this existed only for a short time, and had very limited utility,
we drop it from the compiler. One downside is that we can no longer
disassemble Icelake shaders containing NF types properly, but I doubt
anyone really minds.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28847>
We already have a logical opcode and lower to what is basically a send
instruction. We just weren't using SHADER_OPCODE_SEND, instead having
extra redundant infrastructure for no real gain.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28705>
align16 support is only used on Gen9 for 3-source instructions, quad
swizzling, and dPdy calculations. We don't need it for broadcast.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28458>
brw_broadcast and generate_mov_indirect both had similar comments, both
with typos ("insead"). One still referred to IVB bugs, while the other
dropped that during the compiler split. The one that dropped the
comment mentioned "both of these" issues, while citing only one issue;
there was in fact a third issue (no-Q/UQ) that wasn't mentioned in
either comment. One also had some bad grammar in the comments.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28458>
Folks, there's more than one accumulator. In general, when the
register file is ARF, the upper 4 bits of the register number specify
which ARF, and the lower 4 bits specify which one of that ARF. This
can be further partitioned by the subregister number.
This is already mostly handled correctly for flags register, but lots
of places wanted to check the register number for equality with
BRW_ARF_ACCUMULATOR. If acc1 is ever specified, that won't work.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28281>
Having the reg set with predication disabled shouldn't cause any problems
during the execution. But when decompiling such instruction the flag won't
be shown in the output, so the recompiling will cause
functionally-identical but binary-different code. Fixing this makes
disasm/asm testing easier.
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25657>
v2: Add brw_ir_performance.cpp and brw_fs_generator.cpp changes. Fix
overlapping register allocation (via has_source_and_destination_hazard). Fix
incorrect destination register file encoding.
v3: Prevent lower_regioning from trying to "fix" DPAS sources.
v4: Add instruction latency information for scheduling and perf
estimates.
v5: Remove all mention of DPASW. Suggested by Curro and Caio. Update
the comment in fs_inst::has_source_and_destination_hazard. Suggested
by Caio.
v6: Add some comments near the src2 calculation in
fs_inst::size_read. Suggested by Caio.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25994>
align is a function and when we want use it, the align variable will shadow it
So replace it with other names
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25997>
Gives use 4Gb of bindless surface state on Gfx12.5+ instead of 64Mb.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21645>
The instructions manipulation cr0 use the default mask on lane0. So if
for some reason that lane is disabled in some of the dispatchs, we can
end up not executing the instructions.
Fixes flakyness in dEQP-VK.spirv_assembly.instruction.graphics.16bit_storage.uniform_float_32_to_16.uniform_matrix_float_rtz_frag
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22314>
Now that we aren't using them on Gfx8+ we can drop a lot of cruft.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21783>
This hardware bug is the result of a control flow optimization present
in Gfx8-9 meant to prevent the ELSE instruction from disabling all
channels and update the control flow stack only to have them
re-enabled at the ENDIF instruction executed immediately after it.
Instead, on Gfx8-9 an ELSE instruction that would normally have ended
up with all channels disabled would pop off the last element of the
stack and jump directly to JIP+1 instead of to the ENDIF at JIP,
skipping over the ENDIF instruction. In simple cases this would work
okay (though it's actual performance benefit is questionable), but in
cases where a branch instruction within the IF block (e.g. BREAK or
CONTINUE) caused all active channels to jump outside the IF
conditional, the optimization would break the JIP chain of "join"
instructions by skipping the ENDIF, causing the block of instructions
immediately after the ENDIF to execute with all channels disabled
until execution reaches the reconvergence point.
This issue was observed on SKL in the
dEQP-VK.reconvergence.subgroup_uniform_control_flow_elect.compute.nesting4.0.38
test in combination with some Vulkan binding model changes Lionel is
working on. In such cases the execution with all channels disabled
was leading to corruption of an indirect message descriptor, causing a
hang.
Unfortunately the hardware bug doesn't provide a recommended
workaround. In order to fix the problem we point the JIP of an ELSE
instruction to the instruction immediately before the ENDIF -- However
that's not expected to work due to the restriction that JIP and UIP
must be equal if and only if BranchCtrl is disabled -- So this patch
also enables BranchCtrl, which is intended to support join
instructions within the "ELSE" block, which in turn disables the
optimization described above, which in turn causes us to execute the
instruction immediately *before* the ENDIF with all channels disabled
-- So in order to avoid further fallout from executing code with all
channels disabled we need to insert a NOP before ENDIF instructions
that have a matching ELSE instruction.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20921>
This will affect MTL which will have fp64 support without int64
support.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iván Briano <ivan.briano@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19284>
v2: drop the hardcoded inst->mlen=1 (Rohan)
v3: Move back to LOAD/STORE messages (limited to SIMD16 for LSC)
v4: Also use 4 GRFs transpose loads for fills (Curro)
v5: Reduce amount of needed register to build per lane offsets (Curro)
Drop some now useless SIMD32 code
Unify unspill code
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17555>
Fixes the following EU validation error:
ERROR: Header must be present for all URB messages.
The message header is ignored for URB fence messages, so I doubt that
this actually matters in practice. But we should probably mark it as
present, because you have to send something, and according to the
documentation, there is a message header, it's just ignored.
Fixes: e6a9501aa2 ("intel/fs: Add the URB fence message")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17624>
This structure will contain the opcode mapping tables in the next
commit. For now, this is the mechanical change to plumb it into all
the necessary places, and it continues simply holding devinfo.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17309>
We haven't exposed this intrinsic as it doesn't directly correspond to
anything in SPIR-V. However, it's used internally by some NIR passes,
namely nir_opt_uniform_atomics().
We reuse most of the infrastructure in brw_find_live_channel, but with
LZD/ADD instead of FBL. A new SHADER_OPCODE_FIND_LAST_LIVE_CHANNEL is
like SHADER_OPCODE_FIND_LIVE_CHANNEL but from the other side.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15484>
For any fence greater than local scope, always set flush type to at
least invalidate so that fence goes on properly.
v2: Fixup condition to trigger workaround (Lionel)
v3: Simplify workaround (Curro)
v4: Don't drop the existing WA (Curro)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: 22.0 <mesa-stable>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14947>
brw_find_next_block_end() scans through the instructions to find the end
of the block. We were calling it for every instruction in the program
which is, if you have a single basic block, makes the whole mess a nice
clean O(n^2) when it really doesn't need to be. Instead, only call
brw_find_next_block_end() as-needed. This brings it back to O(n) like
it should have been.
This cuts the runtime of the following Vulkan CTS on my SKL box by 5%
from 1:51 to 1:45: dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13734>
Having an integer destination type instead of a float destination type
confuses the SWSB code. This causes problems on some Intel GPUs. Fix
this by using the correct type in the destination of the F32TOF16
opcode.
Gfx7 doesn't have the HF type, so continue to emit W on that platform.
The assertions in brw_F32TO16 (brw_eu_emit.c) are updated to reflect
this. In scalar mode, UD is never emitted as a destination type for
this opcode, so remove it from the allowed types in the assertion.
I also condidered doing something like de55fd358f ("intel/fs/xehp:
Teach SWSB pass about the exec pipeline of
FS_OPCODE_PACK_HALF_2x16_SPLIT."), but Curro recommended that just using
the correct types is a better fix. I agree.
v2: Add missing changes to fs_generator::generate_pack_half_2x16_split.
I'm not sure how I (and the Intel CI) missed that the first time. :(
v3: Fix copy-and-paste issue in the v2 fix. Noticed by Tapani.
Reviewed-by: Francisco Jerez <currojerez@riseup.net> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14181>
When they re-arranged all the dataport stuff and added the LSC, doing
URB fencing through the dataport no longer makes sense. Instead, there
is now a fence message on the URB shared function.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13092>
