Among other things, fixes a bug for fixed point registers/bitfields.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 24cd746e4b)
At least on a3xx, we cannot do it without some emulation in shader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 5c72672cdc)
Still some open questions.. and at any rate, no additional piglit passes
due to various wrap modes that we need to emulate in at least some
cases :-(
But it does fix some mystery page-faults.. So add some comments in the
code where there are things that we need to emulate or do more r/e, and
push as-is.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a87e44da3a)
Handles texture(samplerCubeShadow, bias), part of GLES3 and GL3
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit f6ff4cd517)
Previously we would get a potentially computed post-swizzle coord based
on the texture target info, which would not include the bias/lod in the
last argument.
The second argument does not have to be adjacent, so adjusting the order
array did not make sense.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 9a3dcf21d7)
This will make life a lot easier as we add support for additional
instructions.
v2: shadow reference value is always .z or .w
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 53678f5e6b)
And config query and DRM_CONF_SHARE_FD to both mega-driver and
traditional build configs, so that EGL_EXT_image_dma_buf_import
works.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 18291ee17a)
4f338c9b introduced logic to trigger a flush rather than overflowing
cmdstream buffer. But the threshold was too low, triggering flushes
where they were not needed. This caused problems with games like
xonotic.
Part of the problem is that we need to mark all state dirty between
cmdstream submit ioctls, because we cannot rely on state being
preserved across ioctls. But even with that, there are still some
problems that are still being debugged. For now:
1) correctly mark all state dirty
2) introduce FD_MESA_DEBUG flush flag to force rendering to be flushed
between each draw, to trigger problems (so that I can debug)
3) use a more reasonable threshold so for normal usecases we don't
trigger the problems
This at least corrects the regression, but there is still more debugging
to do.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 9b6281a7da)
UCMP does not require a compare, only a select.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 436dd1e2f8)
Each get_dst() should have a matching put_dst(). Add a bit of checking
to catch mistakes.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 59ff81663a)
We need the .w component to end up in .x, since the hw appears to fetch
gl_FragColor starting with the .x coordinate regardless of MRT format.
As long as we are doing this, we might as well throw out the remaining
unneeded components.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 80058c0f08)
Because of render-to-alpha (000x) shenanigans, freedreno needs to do
some special handling when rendering to alpha-only formats. And I
noticed that while we had _is_luminance(), _is_intensity(), etc, an
_is_alpha() helper was missing. So fix that.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 3e0a82b52e)
Since software primitive-restart emulation is going to be removed (and
anyways, mostly seemed to be crash prone in combination with
u_primconvert and oddball scenarios (like PIPE_PRIM_POLYGON with only a
single vertex), might as well do it in hardware (which fortunately
didn't turn out to be too hard to figure out).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 720cfb6fe9)
Triggered by shaders like:
FRAG
PROPERTY FS_COLOR0_WRITES_ALL_CBUFS 1
DCL OUT[0], COLOR
DCL CONST[0]
DCL TEMP[0..2], LOCAL
0: IF CONST[0].xxxx :0
1: MOV TEMP[0], TEMP[1]
2: ELSE :0
3: MOV TEMP[0], TEMP[2]
4: ENDIF
5: MOV OUT[0], TEMP[0]
6: END
not really a sane shader, although driver segfaulting is probably
not the appropriate response.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a2c22d80d4)
We currently aren't too clever about dealing with running out of
cmdstream buffer space. Since we use a single buffer for both drawing
and tiling commands, we need to ensure there is enough space at the tail
of the cmdstream buffer to fit the tiling commands.
Until we get more clever, the easy solution is a threshold to trigger
flushing rendering even if the application does not trigger flush (swap,
changing render target, etc). This way we at least don't crash for apps
that do several thousand draw calls (like some piglit tests do).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 4f338c9bbf)
Most of the things the new compiler still has trouble with basically
amount to cp stage removing too many copies. But without the cp stage,
the shaders the new compiler produces are still better (perf and
correctness) than the old compiler. So a simple thing to do until I
have more time to work on it is first trying falling back to new
compiler without cp, before finally falling back to old compiler.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit fd4884e929)
We can't rely on the value from the assembler if relative addressing is
used. So instead use the max of declared-consts (which does not include
compiler immediates) and what we get from the assembler (which does).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 5d8f40a53a)
Conflicts:
src/gallium/drivers/freedreno/ir3/ir3_shader.c
all_delayed will also be true if we didn't attempt to schedule anything
due to no more instructions using current addr/pred. We rely on coming
in to block_sched_undelayed() to detect and clean up when there are no
more uses of the current addr/pred, which isn't necessarily an error.
This fixes a regression introduced in b823abed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 73ff4c5f70)
There are some cases where the scheduler can get itself into impossible
situations, by scheduling the wrong write to pred or addr register
first. (Ie. it could end up being unable to schedule any instruction if
some instruction which depends on the current addr/reg value also
depends on another addr/reg value.)
To solve this we'd need to be able to insert extra mov instructions
(which would also help when register assignment gets into impossible
situations). To do that, we'd need to move the nop padding from sched
into legalize.
But to start with, just detect when we get into an impossible situation
and bail, rather than sitting forever in an infinite loop. This way it
will at least fall back to the old compiler, which might even work if
you are lucky.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b823abedf8)
We must convert it to boolean from the DX9 float encoding that Gallium
specifies.
Later, we should probably define that FACE should be 0 or ~0 if native
integers are supported.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9ec305ead7)
The get_variable_being_redeclared() function can free the 'var' argument.
Thereafter, we cannot assume that 'var' is a valid pointer. This patch
replaces 'var->name' with 'earlier->name' in two places and calls
is_gl_identifier(var->name) before 'var' might get freed.
This fixes several piglit GLSL crashes, including:
spec/glsl-1.50/execution/geometry/clip-distance-in-param
spec/glsl-1.50/execution/geometry/clip-distance-bulk-copy
spec/glsl-1.50/compiler/gs-redeclares-pervertex-out-before-global-redeclaration.geom
I'm not sure why these were not spotted sooner.
A similar bug was previously fixed by f9cecca7a.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit 14379a0644)
This fixes a crash when exiting Firefox. I have really no idea how Firefox
does it. It seems to involve multiple contexts and multithreading.
v2: added an XXX comment
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81680
Acked by Christian König.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Tested-by: Benjamin Bellec <b.bellec@gmail.com>
(cherry picked from commit 833d698ad5)
Otherwise the caching buffer manager may return a buffer which was created
with a different set of flags, which can cause trouble.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 3ede67a4c6)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_winsys.c
Reported by Coverity
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 742158b51e)
Ideally there would be a swrast fallback, but the driver isn't ready for
that. This should avoid crashes if someone tries to use 3d textures
though.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 5524af8136)
