In a scenario where the viewports/scissors are a dynamic state but the
count is static (ie. updated when a graphics pipeline is bound), the
driver wasn't considering that and it was re-emitting the previous
number of viewports/scissors.
This fixes rendering issue with Blender.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13127
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34921>
(cherry picked from commit 9a07ccbc89)
The hardware requires a power of two bpe. To do that, the driver
needs to adjust the pitch/offset/extent based on a texel scale factor
which only applies to 96-bits formats.
This fixes new VKCTS coverage.
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34927>
(cherry picked from commit 4b73d7e817)
For coherent/volatile access, this would be too high for vector access.
Even when we didn't set the alignment, LLVM seemed to assume too high of
an alignment for 8/16-bit vector access.
Fixes generated_tests/cl/vload/vload-char-constant.cl
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Backport-to: 25.0
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34903>
(cherry picked from commit d0a09b6ff7)
This assumes that the start of the load is 32-bit aligned.
For example, a vec3 16-bit store with align_offset=2 should split off the
first component, not the last.
This probably also fixed splitting with 8-bit stores.
Fixes arb_copy_buffer-overlap
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Backport-to: 25.0
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34903>
(cherry picked from commit c1ecad2b11)
We're currently not setting the v10+ width/height in the plane
descriptors. This change ensures we do.
Backport-to: 25.0
Backport-to: 25.1
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34839>
(cherry picked from commit e2aa0b7566)
The width/height fields in the plane descriptors for v10 are missing
their minus(1) modifiers.
This change adds the missing modifiers, which implies also setting
default values to 1 due to how the Two-Plane YUV Overlay interacts with
the plane descriptors.
Fixes: 486c341769 ("panfrost: Add architecture description XML for v10")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34839>
(cherry picked from commit 2542857259)
Rather than setting the plane size to the full allocation minus the
current offset, set it to the actual size of the plane.
Fixes: db20152c8a ("panfrost: Handle Valhall texturing")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34839>
(cherry picked from commit 6a9a4b3eef)
Currently, we will always be setting the slice stride in the plane
descriptor to the surface stride, as the check for multisampling is true
even for single sampled surfaces.
This change fixes this check.
Fixes: db20152c8a ("panfrost: Handle Valhall texturing")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34839>
(cherry picked from commit cc58e30847)
Right now llvmpipe only successfully supports single-plane formats,
limiting the number of supported YCbCr formats to a relatively small
number.
The implicit support for R8G8_R8B8 style subsampled RGB formats
causes the most common ones, YUYV and its variants, to chain up
to to lp_build_fetch_subsampled_rgba_aos() when importing (u)dmabufs
with EXT_image_dma_buf_import.
This code path currently has at least the following issues:
1. It doesn't support the YVYU/PIPE_FORMAT_R8B8_R8G8_UNORM and
VYUY/PIPE_FORMAT_B8R8_G8R8_UNORM, resulting in asserts/crashes.
2. The supported cases, YUYV and UYVY, end up with sub-optimal results
as they always return BT.601/narrow results, ignoring
EGL_YUV_COLOR_SPACE_HINT_EXT and EGL_SAMPLE_RANGE_HINT_EXT.
Stopping advertising support for those formats, as well as native support
for PIPE_FORMAT_YUYV and PIPE_FORMAT_UYVY, results in all four variants
taking fallback paths which happen to be much better supported.
An additional effect is that YUYV and UYVY are correctly advertised as
external only.
Cc: mesa-stable
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34775>
(cherry picked from commit 4051d4ef59)
VK_ERROR_INITIALIZATION_FAILED will fail physical device enumeration.
Returning VK_ERROR_INCOMPATIBLE_DRIVER means that the driver can still
be used on supported GPUs when multiple GPUs are installed.
cc: mesa-stable
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34783>
(cherry picked from commit 84b9c281fe)
Otherwise, these can cause infinite loops in optimization because there
aren't _split variants and the optimizer tries to combine and split
things infinitely.
Reviewed-by: Mel Henning <drawoc@darkrefraction.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34849>
(cherry picked from commit efd1cddbe9)
wherever we check that src_mod is none.
This commit simply does:
s/src_mod.is_none()/is_unmodified()/
across all of nak except the definition of is_unmodified() itself.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Fixes: bad23ddb48 ("nak: Add F16 and F16v2 sources")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34794>
(cherry picked from commit 9d1c38ddf1)
Emitting compute dispatches on SDMA just hangs. It might be needed
to switch to gang submit for these to work but fixing the GPU hang is
more important for now.
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34805>
(cherry picked from commit 0684dc5fa8)
This allow us to force mesa to use GL_UNSIGNED_INT rather than
GL_UNSIGNED_SHORT for when chosing the texture format for
GL_DEPTH_COMPONENT. The increased depth precision allows us to
match the Nvidia/AMD closed drivers default behaviour.
Here we also enable the workaround for the remastered tombraider
games.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13032
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34752>
(cherry picked from commit e0a111540f)
Previously, this function tried to swap the instruction which is not
v_mov_b32, so that it doesn't introduce any new OPY-only instructions. If
both were v_mov_b32, it swapped Y. Since this makes Y opy-only, this can't
be done if X is also opy-only.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 408fa33c09 ("aco/gfx12: don't use second VALU for VOPD's OPX if there is a WaR")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13101
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34841>
(cherry picked from commit 9ca71b52aa)
intel_decoder_init() initializes intel_batch_decode_ctx so later
we can call decode functions but it depends on data stored in
brw/elk_isa_info but that was being allocated in stack
of intel_decoder_init() then when the decode functions were executed
it was accessing garbage at the brw/elk_isa_info memory.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ec2d20a70d ("intel/tools: Add helpers for decoder_init/disasm")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34776>
(cherry picked from commit 3e5a735d01)
Or current render target cache setting is to key on the binding table
index, meaning the HW associates a number in the range [0, 7] to a
RENDER_SURFACE_STATE description. If you want change the render target
0 between 2 draw calls, you need to insert a PIPE_CONTROL in between
the 2 draw calls with pb-stall + rt-flush in order to flush an writes
to a previous RENDER_SURFACE_STATE that has now becomed disassociated
with the [0, 7] number.
This PIPE_CONTROL taking care of the flush is dealt with in
cmd_buffer_maybe_flush_rt_writes(). This function diffs the current
BTI setup for render targets (first 0 to 7 BTIs) with what the next
fragment shader wants.
The issue here is we might have a render pass with 0 color attachments
and yet in 98cdb9349a we added one pointing to the render target 0,
but in the emit_binding_table() when we finally program the BTI, we
check the render pass color count and program a null surface state
instead of an actual surface state. And this leads to hangs because
the render target cache will end up with inconsistent state data.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 98cdb9349a ("anv: ensure null-rt bit in compiler isn't used when there is ds attachment")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12955
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34603>
(cherry picked from commit 63f633557f)
Not entirely sure if it's actually required, but this makes it consistence
with r600_resource_create also calling r600_compute_global_buffer_create
for global memory buffers.
Cc: mesa-stable
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Patrick Lerda <patrick9876@free.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34623>
(cherry picked from commit f6e3c967d9)
On a7xx, the max constlen for compute is increased to 512 vec4s or 8KB,
however the size of the LB was not increased beyond 40KB. A quick
calculation shows that 8KB of consts multiplied by 2 banks plus the
API maximum of 32KB shared memory would exceed 40KB. This means that
we can't always use a constlen of 512, and sometimes have to fall back
to 256 when a lot of shared memory is in use.
In the future, we can use similar calculations to figure out how much
"extra" shared memory is available for the backend to spill to, but we
currently don't support spilling to shared memory.
Fixes: 5879eaac18 ("ir3: Increase compute const size on a7xx")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34746>
(cherry picked from commit ea9d694a7b)
This fixes a compilation issue in Marvel Rivals where the legalization
logic and the encoding logic don't line up, which results in an
assertion failure on this instruction:
r17 = hfma2 r17.xx -r18.xx 0x3c003c00
The fix here is a little overly restrictive because it turns out we
actually do have modifiers for all 3 sources. Those modifiers will
be added in later commits.
Fixes: 567cae69c3 ("nak: Add 16-bits float operations")
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34750>
(cherry picked from commit 1ff7135691)
