Icelake removed the PLN instruction for interpolating fragment shader
inputs, instead adding a special "Native Float" (NF) data type which
was a 66-bit floating point data type that could only be used with the
accumulator. On Tigerlake, they dropped NF support in favor of just
doing the interpolation with MAD instructions.
We stopped using NF years ago (commit 9ea90aae1e),
instead just using the fs_visitor::lower_linterp() pass to emit MADs.
Since this existed only for a short time, and had very limited utility,
we drop it from the compiler. One downside is that we can no longer
disassemble Icelake shaders containing NF types properly, but I doubt
anyone really minds.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28847>
These are new variants of the existing brw_reg GRF constructors that
take registers numbers in the new 512b units. Mainly useful for
thread payload setup code to use register numbers in a format that
matches the BSpec.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26606>
This is for avoid #include "program/prog_instrunction.h" in intel/brw code
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24438>
This fixes a bug in the handcrafted SIMD lowering done by the SHUFFLE
code generation, which wasn't taking into account the source and
destination region strides while deciding whether it needs to split an
instruction.
v2: Use new element_sz() helper instead of left shift. (Lionel)
Fixes: 90c9f29518 ("i965/fs: Add support for nir_intrinsic_shuffle")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14273>
...and rename it to brw_reg_type_is_unsigned_integer. It is now next to
brw_reg_type_is_floating_point and brw_reg_type_is_integer.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12045>
Using HALT to immediately jump to the end of the shader is required to
implement GL_EXT_gpu_shader4 and OpenGL 3.0. However, vanilla OpenGL
1.2 doesn't forbid it and it likely makes something somewhere faster.
We should be consistent and implement the same discard behavior on all
hardware if we can.
The rules for HALT on Gen4-5 are a bit different from Gen6+. On the
older hardware, there is no stack for HALT; instead it's up to software
to save and restore mask registers. However, there's no real saving
needed since we only use HALT to jump to the end of the program where
we're about about to do our FB writes. All we need to do is reset AMask
to DMask, the value it was initialized to at the start of the thread.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5244>
Mostly this uses util_is_power_of_two_or_zero, which has the same
behavior as _mesa_is_pow_two when the input is zero. In cases where the
value is known to be != 0 ahead of time I used the _nonzero variant as
it may be faster on some platforms.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3024>
Shaders containing software implementations of double-precision
operations can be very large such that we have more the 2^16 virtual
registers during optimization.
Move the 'nr' field to the union containing the immediate storage and
expand it to 32-bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes a bug uncovered by my NIR integer division by constant
optimization series.
Fixes: 19f9cb72c8 "i965/fs: Add pass to propagate conditional..."
Fixes: 627f94b72e "i965/vec4: adding vec4_cmod_propagation..."
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
16-bit immediates need to replicate the 16-bit immediate value
in both words of the 32-bit value. This needs to be careful
to avoid sign-extension, which the previous implementation was
not handling properly.
For example, with the previous implementation, storing the value
-3 would generate imm.d = 0xfffffffd due to signed integer sign
extension, which is not correct. Instead, we should cast to
uint16_t, which gives us the correct result: imm.ud = 0xfffdfffd.
We only had a couple of cases hitting this path in the driver
until now, one with value -1, which would work since all bits are
one in this case, and another with value -2 in brw_clip_tri(),
which would hit the aforementioned issue (this case only affects
gen4 although we are not aware of whether this was causing an
actual bug somewhere).
v2: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
brw_reg::type is "enum brw_reg_type type:4". For whatever reason, GCC
is treating this as an int instead of an enum. As a result, it doesn't
detect missing switch cases and it doesn't detect that flow can get out
of the switch.
This silences the warning:
src/intel/compiler/brw_reg.h: In function ‘bool brw_regs_negative_equal(const brw_reg*, const brw_reg*)’:
src/intel/compiler/brw_reg.h:305:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
../src/intel/compiler/brw_reg.h: In function ‘bool brw_regs_negative_equal(const brw_reg*, const brw_reg*)’:
../src/intel/compiler/brw_reg.h:305:1: warning: control reaches end of non-void function [-Wreturn-type]
Introduced by 8f83eea71e ("i965: Add negative_equals methods").
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This method is similar to the existing ::equals methods. Instead of
testing that two src_regs are equal to each other, it tests that one is
the negation of the other.
v2: Simplify various checks based on suggestions from Matt. Use
src_reg::type instead of fixed_hw_reg.type in a check. Also suggested
by Matt.
v3: Rebase on 3 years. Fix some problems with negative_equals with VF
constants. Add fs_reg::negative_equals.
v4: Replace the existing default case with BRW_REGISTER_TYPE_UB,
BRW_REGISTER_TYPE_B, and BRW_REGISTER_TYPE_NF. Suggested by Matt.
Expand the FINISHME comment to better explain why it isn't already
finished.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
This allows representing conditional mods and predicates on f1.0-f1.1
at the IR level by adding an extra bit to the flag_subreg
backend_instruction field.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Control register cr0 in i965 can be used to change the rounding modes
in 32-bit to 16-bit floating-point conversions.
From intel Skylake PRM, vol 07, section "Register and Tegister Regions",
subsection "Control Register" (page 754):
"Subregister cr0.0:ud contains normal operation control fields such as the
floating-point mode ... "
Floating-point Rounding mode is changed at bits 5:4 of cr0.0:
"Rounding Mode. This field specifies the FPU rounding mode. It is
initialized by Thread Dispatch."
00b = Round to Nearest or Even (RTNE)
01b = Round Up, toward +inf (RU)
10b = Round Down, toward -inf (RD)
11b = Round Toward Zero (RTZ)"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I'm going to call this from brw_inst.h, and I don't want to have to
include all of brw_reg.h.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
I'm going to encapsulate all of the logic dealing with register types in
this file.
Rename the parameters for the hardware encodings from type -> hw_type at
the same time.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The hardware encodings often mean different things depending on whether
the source is an immediate.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
These vaguely corresponded to the hardware encodings, but that is purely
historical at this point. Reorder them so we stop making things "almost
work" when mixing enums.
The ordering has been closen so that no enum value is the same as a
compatible hardware encoding.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The execution data size is the biggest type size of any instruction
operand.
We will use it to know if the instruction deals with DF, because in Ivy
we need to double the execution size and regioning parameters.
v2:
- Fix typo in commit log (Matt)
- Use static inline function instead of fs_inst's method (Curro).
- Define the result as a constant (Curro).
- Fix indentation (Matt).
- Add braces to nested control flow (Matt).
v3 (Curro):
- Add get_exec_type() and other auxiliary functions and use them to
calculate its size.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Fix bogus 'type != BAD_FILE' check. Fix deduced
execution type for integer vector types. Take destination type as
execution type where there is no valid source. Assert-fail if the
deduced execution type is byte. Move into brw_ir_fs.h header for
consistency with the VEC4 back-end. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_reg.h (Browse further)
