Parameterize build_asin() on the fit coefficients so the
implementation can be shared while still using different polynomials
for asin and acos. Also switch back to implementing acos in terms of
asin -- The improvement obtained from cancelling out the pi/2 terms
was negligible compared to the approximation error.
vtn_handle_type() creates a signed type regardless of the value of the
signedness flag, which usually doesn't make much of a difference
except when the type is used as base sampled type of an image type,
what will cause the base type of the NIR image variable to be
inconsistent with its format and cause an assertion failure in the
back-end (most likely only reproducible on Gen7), and may change the
semantics of the image intrinsic subtly (e.g. UMIN may become IMIN).
We use the simple batch helper to submit a batch at driver startup time
which holds all the state that never changes. We don't have a whole lot
and once we enable tesselation there'll be even less. Even so, it's a
simple mechanism and reduces our steady state batch sizes a bit.
The gen7 pipeline has a useful helper function for this, let's use it in
gen8_pipeline.c too. The gen7 function has an off-by-one bug though: we
have to compute log2(size / 1024) - 1, but we divide by 2048 instead so
as to avoid the case where size is less than 1024 and we'd return -1.
Fixes compute since 7dd31b81fe
gallium/radeon: support PIPE_CAP_SURFACE_REINTERPRET_BLOCKS
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The vec4 backend, at the end, does this:
if (inst->is_3src()) {
for (int i = 0; i < 3; i++) {
if (inst->src[i].vstride == BRW_VERTICAL_STRIDE_0)
assert(brw_is_single_value_swizzle(inst->src[i].swizzle));
So make sure that we use the same conditions when trying to
copy-propagate. UNIFORMs will be converted to vstride 0 in
convert_to_hw_regs, but so will ATTRs when interleaved (as will happen
in a GS with multiple attributes). Since the vstride is not set at
copy-prop time, infer it by inspecting dispatch_mode and reject ATTRs if
they have non-scalar swizzles and are interleaved.
Fixes assertion errors in dolphin-generated geometry shaders (or
misrendering on opt builds) on Sandybridge or on IVB/HSW with
INTEL_DEBUG=nodualobj.
Co-authored-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93418
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
v2: assert and return if query_memory_info is not set
rebase
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
If you're worried about the duplication of some CAPs, we can remove them
later.
v2: add fields for memory eviction stats
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
GLsync objects had a race condition when used from multiple threads
(which is the main point of the extension, really); it could be
validated as a sync object at the beginning of the function, and then
deleted by another thread before use, causing crashes. Fix this by
changing all casts from GLsync to struct gl_sync_object to a new
function _mesa_get_and_ref_sync() that validates and increases
the refcount.
In a similar vein, validation itself uses _mesa_set_search(), which
requires synchronization -- it was called without a mutex held, causing
spurious error returns and other issues. Since _mesa_get_and_ref_sync()
now takes the shared context mutex, this problem is also resolved.
Fixes bug #92757, found while developing Nageru, my live video mixer
(due for release at FOSDEM 2016).
v2: Marek: silence warnings, fix declaration after code
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Yet another change motivated by AMD GPUPerfStudio compatibility. These groups
are not directly accessible from userspace, and AMD GPUPerfStudio does not
actually query them - it just requires them to be there. Hence, adding
a placeholder for now.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
This is yet another change motivated by appeasing AMD GPUPerfStudio's
hardcoding of performance counter group numbers.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
As documented in the comment, AMD GPUPerfStudio unfortunately hardcodes the
order of performance counter groups. Let's do the pragmatic thing and present
the same order as Catalyst/Crimson.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
This group was used by older versions of AMD GPUPerfStudio (via
AMD_performance_monitor) to identify the GPU family, and GPUPerfStudio
still complains when it isn't available.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Set R600_DEBUG=preoptir to dump the LLVM IR before optimization passes,
to allow diagnosing problems caused by optimization passes.
Note that in order to compile the resulting IR with llc, you will first
have to run at least the mem2reg pass, e.g.
opt -mem2reg -S < shader.ll | llc -march=amdgcn -mcpu=bonaire
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> (original patch)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (w/ debug flag)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Also fixes a resource leak when an upload_mgr is used for constants.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
At the same time, fix a memory leak noticed by Ilia Mirkin.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We can get rid of our reference immediately, since the driver will hold
onto it for us.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
While rather unlikely, uploads _can_ fail. Doing them earlier means
we'll have to restore less state when they do fail, and it's slightly
easier to check the restore code.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Previously the framebuffer default sample count was taken directly
from the value given by the application. On the i965 driver on HSW if
the value wasn't one that is supported by the hardware it would hit an
assert when it tried to program the state for it. This patch fixes it
by adding a derived sample count to the state for the default
framebuffer. The driver can then quantize this to one of the valid
values in its UpdateState handler when the _NEW_BUFFERS state changes.
_mesa_geometric_samples is changed to use the new derived value.
Fixes the piglit test arb_framebuffer_no_attachments-query
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93957
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixup to commit 03b3eb90d - the number of buffers could be larger than
the number of elements, in which case we'd pass a negative argument to
PUSH_SPACE, which would be bad. While we're at it, merge it with the
other PUSH_SPACE at the top of the function.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
nvc0_vbo has explicit push space checking enabled, so we must run
PUSH_SPACE by hand. A few spots missed that.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
The spill logic will insert convert ops when moving between files. It
seems like the emission logic wasn't quite ready for these converts.
Tested on fermi, and visually looked at nvdisasm output for maxwell.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
