Remove 'polygon_mode' from pipeline and read it from
dynamic state instead.
This affects following packets:
3DSTATE_CLIP
3DSTATE_RASTER
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18879>
On DG2 the HW will fetch the binding entries into the cache
for every single thread when a compute walker is dispatched,
wiping out the advantages of the cache prefetch.
The spec also advises to not do a cache prefetch when we have more than
31 binding table entries, but most real world applications will never
hit that limit.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18498>
To clean up compilation warnings about unused variables
when asserts are disabled.
v2: UNUSED -> ASSERTED (Eric Engestrom)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19016>
anv_pipeline_get_last_vue_prog_data (used by emit_3dstate_primitive_replication)
doesn't work for mesh stage.
Fixes: ae57628dd5 ("anv: Drop anv_pipeline::use_primitive_replication")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18495>
SOL unit issues, wa is to send PC with CS stall after SO_DECL.
v2: emit also in genX_gpu_memcpy (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18409>
Instead of this fragile use_primitive_replication bit which we set
differently depending on whether or not we pulled the shader out of the
cache, compute and use the information up-front during the compile and
then always fetch it from the vue_map after that. This way, regardless
of whether the shader comes from the cache or not, we have the same flow
and there are no inconsistencies.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17602>
If task redistribution is enabled, then some mesh shaders read
garbage from task payload.
It may be a hardware bug, or it may be our bug. Who knows :(
This change will probably negatively affect performance of task
shader-enabled workloads on multi-slice GPUs, because mesh shaders
will be executed only on the slice where task shader was spawned.
Fixes: ef04caea9b ("anv: Implement Mesh Shading pipeline")
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16197>
Each logical device can point to its physical device intel_device_info
saving at least one intel_device_info.
This also allow us to set 'const' to avoid values in intel_device_info
being changed by mistake.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17897>
When we made depth/stencil dynamic, we lost the optimization. This is
particularly important for cases where the stencil test is enabled but
never writes anything as certain combinations with discard can cause
the stencil write (which doesn't do anything) to get moved late which
can be a measurable perf hit. According to 028e1137e6 ("anv/pipeline:
Be smarter about depth/stencil state", it was a couple percent for DOTA2
on Broadwell back in the day. No idea how it affects current titles.
This may also improve the depth/stncil PMA workarounds on Gen8 and Gen9
since they're now looking at optimized depth/stencil state.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
Now that we've stopped trying to do dynamic stuff up-front, we're only
merging in one bit: DoubleSidedStencilEnable. There's no point in all
the merging code for one bit which is a constant anyway.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
This attempts to be a pretty minimal refactor. We just switch all the
state emit code to use the new graphics pipeline state object.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
Following our rule that anything that can be dynamic should be set
(and is this case is already) in the following files :
- genX_cmd_buffer.c
- gfx8_cmd_buffer.c
- gfx7_cmd_buffer.c
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
Those fields have confusing names. They hold non dynamic state,
specified at pipeline creation that we copy into the dynamic state of
the command buffer whenever we bind a pipeline. This non dynamic state
might get picked up in the dynamically emitted instructions of the 3D
pipeline because our HW packets are not exactly splitted like the
Vulkan API.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17601>
This bit mask is already computed in
anv_graphics_pipeline::dynamic_states in anv_graphics_pipeline_init().
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17601>
[anholt: changed to make all drivers do the right thing by moving the
payload barycentric check into the compiler]
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17381>
Correct the max thread number for DG2+ platforms according
to below bspec.
Ref: Bspec: 47202
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17506>
We were using both uint32_t and anv_cmd_dirty_mask_t, this is
a cleanup making type usage consistent. Commit also changes type of
the mask to be enum anv_cmd_dirty_bits.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16849>
For cases with lots of very small primitives, this may improve
performance because we're not executing those dead channels all the
time.
Shader-db reports no instruction or cycle-count changes. However, by
hacking up the driver to report when this optimization triggers, it
appears to affect about 10% of shader-db.
v2 (Kenneth Graunke): Always enable VMask prior to XeHP for now,
because using VMask on those platforms allows us to perform the
eliminate_find_live_channel() optimization. However, XeHP doesn't
seem to have packed fragment shader dispatch, so we lose that
optimization regardless, and there's no reason not to avoid vmask.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1054>
On Gfx7 we can only give the sample location for a given multisample
number. This means everytime the multisampling value changes, we have
to re-emit the locations. It's fine because it's also where
(3DSTATE_MULTISAMPLE) the number of samples is stored.
On Gfx8+ though, 3DSTATE_MULTISAMPLE only holds the number of samples
and all the sample locations for all number of samples are located in
3DSTATE_SAMPLE_PATTERN. So to be more effecient there, we need to
track the locations for all sample numbers and compare new values with
the relevant sample count when touching the dynamic state.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
Instead of having two different helpers, delete the pipeline_cache ones.
Also, instead of manually handling the cache == NULL case in every
vkCreateFooPipelines call, handle it inside the helpers. This means
that BLORP can use them too by passing cache=NULL.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13184>
This patch is intended to be somewhat minimal. There's a lot of cleanup
work that can be done but we'll leave that to later patches.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13184>
This information should match the current pipeline sample count.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15310>
