No functional change. This patch modifies intel_miptree_alloc_mcs to
allocate the 4x MCS buffer using MESA_FORMAT_R8 instead of
MESA_FORMAT_A8. In principle it doesn't matter, since we only access
the buffer using MCS-specific hardware mechanisms, so all that's
important is to use a format with the correct size. However,
MESA_FORMAT_A8 has enough unusual behaviours that it seems prudent to
avoid it.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
It seems reset is not required for setting the max_wm_threads to 80
on gen6 GT2.
Increases performance in the Counter-Strike: Source video stress test
by 7.18% (n=5).
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
The VCC register is tricky because the SALU views it as 64-bit, but the
VALU views it as 1-bit. In order to deal with this we've added some
special bitcast and binary operations to help convert from the 64-bit
SALU view to the 1-bit VALU view and vice versa.
If you want to change your compiler arguments, just set CFLAGS/CXXFLAGS.
Having Mesa have this separate variable is a great way to have your arguments
not thoroughly propagated to all compiler invocations.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In all current uses, it was appended to CFLAGS, which already had -m32. If
you want to do some other flag supplied to compiler invocations, there's
CFLAGS/CXXFLAGS.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No functional change. This patch modifies brw_blorp_blit.cpp to use
the ROUND_DOWN_TO macro instead of open-coded bit manipulations, for
clarity.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The emit->key.fkey info is only valid if we're generating a fragment shader.
We should not look at it if we're generating a vertex shader.
When generating a vertex shader, the value of emit->key.fkey.num_textures was
garbage and the loop over num_textures would read invalid data. At best
this would cause us to emit an unused constant. At worse, we could segfault.
Just by dumb luck, fkey.num_textures was usually a smallish integer.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Recently more files were removed from control to be auto-generated
in the dricore library. Android build was not able to locate the
new files if they were not created beforehand.
LOCAL_SRC_FILES includes some of those files and Android.gen.mk
re-defines this variable by filtering out the auto-generated files.
Unfortunately for this variable it is not the same to have the SRCDIR
variable defined as the current directory.
By re-defining SRCDIR for the autotools build the Android build system
is happy again and the new files were actually removed from the sources
to use the auto generated versions.
Also patch d5c1801a01 was partially reverted as the files
can not be compiled to the LOCAL_PATH, instead they should live on the
intermediates folder so that a clean can wipe them out.
v3: [chad] Fix the definition of SRCDIR in libdricore/Makefile.am.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Daniel Charles <daniel.charles@intel.com>
XGetImage() will generate a BadMatch error if the source window isn't
visible. When that happens, create a new XImage. Fixes piglit 'select'
test failures with swrast/xlib driver.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Always allocate space for the inverse matrix in _math_matrix_ctr()
since we were always calling _math_matrix_alloc_inv() anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When computing a matrix inverse, if the determinant is too small we could hit
a divide by zero. There's a check to prevent this (we basically give up on
computing the inverse and return the identity matrix.) This patch loosens
this test to fix a lighting bug reported by Lars Henning Wendt.
v2: use abs(det) to handle negative values
NOTE: This is a candidate for the 8.0 branch.
Tested-by: Lars Henning Wendt <lars.henning.wendt@gris.tu-darmstadt.de>
The sendc instruction causes the fragment shader thread to wait for
any dependent threads (i.e. threads rendering to overlapping pixels)
to complete before sending the message. We need to use sendc on the
first render target write in order to guarantee that fragment shader
outputs are written to the render target in the correct order.
Previously, we only used the "sendc" instruction when writing to
binding table index 0. This did the right thing for fragment shaders,
because our fragment shader back-ends always issue their first render
target write to binding table index 0. However, it did the wrong
thing for blorp, which performs its render target writes to binding
table index 1.
A more robust solution is to use sendc for all render target writes.
This should not produce any performance penalty, since after the first
sendc, all of the dependent threads will have completed.
For more information about sendc, see the Ivy Bridge PRM, Vol4 Part3
p218 (sendc - Conditional Send Message), and p54 (TDR Registers).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
A lot of code was still differentiating between between winsys and
user fbos by testing the fbo's name against zero. This converts
everything in the i915 and 965 drivers over to use _mesa_is_user_fbo()
and _mesa_is_winsys_fbo().
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A lot of code was still differentiating between between winsys and
user fbos by testing the fbo's name against zero. This converts
everything in core mesa, the state tracker, and src/mesa/program over
to use _mesa_is_user_fbo() and _mesa_is_winsys_fbo().
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The OpenGL(R) ES Shading Language
Version 1.00 Revision 17 (12 May, 2009)
> 4.6.1 The Invariant Qualifier
> ... To force all output variables to be invariant, use the pragma
> #pragma STDGL invariant(all)
Signed-off-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We already provided these files on 'make install', but only created a
'libglapi.so' in the top-level lib/ convenience folder. We used to
create all three, but at some point in the build system churn, it broke.
Various applications (like the ES2 conformance suite) seem to link
against libglapi.so.0, so without these links, setting LD_LIBRARY_PATH
and LIBGL_DRIVERS_PATH can lead to using /usr/lib/libglapi.so.0 with
/home/whatever/libGL.so, which leads to API calls getting routed
incorrectly (i.e. glCompileShader -> _mesa_LinkProgramARB), which leads
to rage problems.
Preserve developer sanity...install links.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Ever since ctx->NativeIntegers was set, the conversion flag has been
PARAM_NO_CONVERT.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since osmesa now has been converted to Makefile.am, an appropriate install: rule
is generated to install the shared libary, so we no longer need to do that in
src/mesa/Makefile.old
This leaves nothing in src/mesa/Makefile.old but the tags: rule, so move that to
Makefile.am and remove Makefile.old
Also, nothing now uses OSMESA_LIB_GLOB anymore, so remove it
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 6c6803f28d removed xm_image.[ch], and removed
xm_image.c, but not xm_image.h from the Makefile, this was subsequently carried over
into Makefile.am
Remove xm_image.h from Makfile.am. This allows 'make dist' to succeed, even if it
doesn't do anything useful
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
