Memory allocated through panfrost_allocate_transient() is likely to
come from the transient pool. Let's add the BO backing the allocated
memory region to the job batch so the kernel can retain this BO while
jobs are executed.
In practice that has never been a problem because the transient pool
is never shrinked, and even if it was, we still control the lifetime of
the job, so there's no reason for this BO to be freed before the GPU is
done executing the batch. But it still make sense to add the BO for
debugging purpose.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Both the BO cache and the transient pool are shared across
context's. Protect access to these with mutexes.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Jobs _must_ only be shared across the same context, having
the last_job tracked in a screen causes use-after-free issues
and memory corruptions.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
* Fix 2D/2DArray/3D tiling parameters:
There is a bottom threshold for width and height.
* Renable tiling for Cubemap, after setting the right parameters.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Equivalent of 0c1dd9dee "broadcom/vc4: Allow importing linear BOs with
arbitrary offset/stride." for v3d.
Allows YUV buffers with a single buffer and plane offsets to be
passed in.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Input to GS is just a set of attributes, so remove explicit setup of
'position' which is meaningless for GS input processing.
Reviewed-by: Alok Hota <alok.hota@intel.com>
This reverts commit 5a2e65be89.
Even though CONTEXT_CONTROL is emitted by the kernel, CONTEXT_CONTROL
still needs to be emitted by the UMD, or else the driver will hang
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We enabled fast clears at level > 0, but didn't minify the dimensions
when comparing the box size, so we always thought it was a partial
clear and as a result never actually enabled any.
This eliminates some slow clears in Civilization VI, but they are mostly
during initialization and not the main rendering.
Thanks to Dan Walsh for noticing we had too many slow clears.
Fixes: 393f659ed8 ("iris: Enable fast clears on other miplevels and layers than 0.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
is_scanout is not used anywhere and can be inferred within
panfrost_drm_submit_vs_fs_job() if required.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Otherwise it doesn't exist and can't be parsed, so everything dies at
screen init time.
Fixes: 6dc4ddc5f8 ("iris: use driconf for 'bo_reuse' parameter")
Some functionality has been added to deqp-volt to only print
regressions, so update our version of it and use the new options.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
LLVM 7.0 ditched the pmulu intrinsics.
This is only a trivial patch to use the fallback code instead.
It'll likely produce atrocious code since the pattern doesn't match what
llvm itself uses in its autoupgrade paths, hence the pattern won't be
recognized.
Should fix https://bugs.freedesktop.org/show_bug.cgi?id=111496
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When u_upload_mgr fills up a buffer, it unmaps and destroys it. Our
unmap function was automatically performing the equivalent of a
FlushMappedBufferRange call in this case. Because the buffer mapping
is persistent and coherent, we don't actually do any flushing when we
do the rest of the writes to the buffer - we were just doing one final
one at the end. But we would be using the uploaded contents on the
GPU the whole time.
This certainly shouldn't be necessary for streaming buffers, and if
such flushing and dirtying is necessary for coherent buffers, this is
wildly insufficient.
Drops a small number of constant packets and PIPE_CONTROL flushes from
most benchmarks that I've looked at. Doesn't seem to make much of an
impact on performance, however.
Thanks to Felix Degrood for noticing that we were emitting more
3DSTATE_CONSTANT_* packets than we needed to.
NIR shaders use GLSL types (note: these live outside libglsl), and
nine needs to properly initialize these just like the other state
trackers. This fixes an assertion failure when TTN is used.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
We were clamping the LOD to force non-mipmap filtering, but that means
that the HW doesn't get to select between the min and mag filters.
Setting MIPFILTER_LINEAR_FAR appears to force non-mipmap filtering.
Fixes all failures in dEQP-GLES2.functional.texture.filtering.2d.*
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reduces the size of the u_format_table.c file by 140k (out of 1.64M)
and makes me less confused about endianness in gallium.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The formats affected are:
- LA x (16_FLOAT, 32_FLOAT, 32_UINT, 32_SINT)
- R8G8B8 x (UNORM, SNORM, SRGB, USCALED, SSCALED, UINT, SINT)
- RG/RGB/RGBA x (64_FLOAT, 32_FLOAT, 16_FLOAT, 32_UNORM, 32_SNORM,
32_USCALED, 32_SSCALED, 32_FIXED, 32_UINT, 32_SINT)
- RGB/RGBA x (16_UNORM, 16_SNORM, 16_USCALED, 16_SSCALED,
16_UINT, 16_SINT)
- RGBx16 x (UNORM, SNORM, FLOAT, UINT, SINT)
- RGBx32 x (FLOAT, UINT, SINT)
- RA x (16_FLOAT, 32_FLOAT, 32_UINT, 32_SINT)
The updated st_formats.c unit test checks that the formats affected by
this change are all array formats in the equivalent Mesa format (if
any). Mesa's array format definition is clear: the value stored is an
array (increasing memory address) of values of the channel's type.
It's also the only thing that makes sense for the RGB types, or very
large types like RGBA64_FLOAT (A should not move to the low address
because the cpu is BE).
Acked-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Tested-by: Matt Turner <mattst88@gmail.com> (unit tests on BE)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Nothing used this var.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Nothing accessed the .value field, just the .chan. Unwrap all the
code from the union, for clarity (and 13k less generated code).
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Shaves 30k off of the 1.6M .c file, and makes for less noise for me
trying to understand how gallium formats actually work.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reset the damage area in the resource_from_handle() path (as done in
panfrost_resource_create()).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Looks like initial RE was wrong and some fields have different purpose.
I.e. there's no "disable_mipmap" field, it's actually part of another field
that selects mipmap filtering.
Also fix layout position.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
We need two different values of the register, one for NGG and one for
legacy, in order to fix edge flags for the legacy pipeline.
Passing the ngg flag to emit_clip_regs would be too complicated,
so CONTEXT_REG_RMW is used for partial register updates.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
