Issue a partial resolve instead of a full resolve from
transition_depth_buffer() when the final usage requires the
CCS-compressed surface to provide a complete representation of the
image.
This significantly improves performance of applications that
frequently interleave depth rendering and sampling on non-WT surfaces
(e.g. MSAA surfaces). Nba2K23-trace-dx11-2160p-ultra improves
performance by about 260% with this on MTL, DG2 shows a similar
benefit.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31139>
For transitions to a state that requires the image to be fully defined
by the primary+CCS surface without necessarily requiring a valid
primary we have to perform a resolve if the initial state was
ISL_AUX_STATE_COMPRESSED_HIER_DEPTH, which isn't fully defined by its
primary+CCS surface. This full resolve will be replaced with a more
efficient partial resolve in a future commit, but we have to do this
up front in order to avoid breaking bisectability.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31139>
We can end up in this situation in cases where the application uses a
layout that allows both rendering and sampling from a depth surface,
since in such cases we will attempt to render with HIZ CCS WT usage as
a side effect of using ISL_AUX_USAGE_HIZ_CCS_WT for all layouts that
allow the image to be sampled from.
Disabling fast clears for that case isn't expected to cause
performance regression since before this series for HiZ CCS non-WT
images transitioning to such a layout we would have issued a full
resolve and used ISL_AUX_USAGE_NONE, which also doesn't support fast
clears.
Multisample depth images should still get fast clears after this
commit in cases where the rendering and sampling is split into
separate render pasess with a layout transition between them that
transitions the image from a W/O layout into a R/W one -- Such
transitions will be handled with a relatively cheap partial resolve in
a subsequent commit.
v2: Add details of additional findings about these hardware issues in
comment.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
v3: Pass aspect bit consistent with layout to
anv_layout_to_aux_usage() instead of defaulting to
VK_IMAGE_ASPECT_DEPTH_BIT.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31139>
Currently anv_fast_clear_depth_stencil() doesn't know the correct
layout of the depth and stencil images, instead it uses
ANV_IMAGE_LAYOUT_EXPLICIT_AUX to force the base AUX usage of each
plane, which can be inconsistent with the VkImageLayout currently in
use. Plumb the correct depth and stencil layouts.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31139>
Disable RHWO by default for singlesample draws and for MSAA
draws if a drirc key is set (avoid perf hit if not needed).
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39404>
Fixes a crash with:
dEQP-VK.api.external.semaphore.opaque_fd.signal_export_import_wait_temporary
when driver calls genX(CmdSetEvent2) -> emit_apply_pipe_flushes with
having NULL in emitted_flush_bits.
Fixes: 8834ef8bcd ("anv: use flushing PIPE_CONTROL for event signaling")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39343>
Gfx20+ doesn't do PIPELINE_SELECT, the assumption is that we can now
do any PIPE_CONTROL we want regardless of the pipeline mode.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38707>
We experimentally found that some fixed functions have apparently be
hooked up to the L3. So we can drop a some flushing.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38707>
Now that we track the stages, it's not required to add those bits
anymore.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38707>
Now that we have the stages accumulated, we can delay this at flushing
time.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38707>
For a bunch of workarounds and special cases we want PIPE_CONTROL not
RESOURCE_BARRIER. We want emit_apply_pipe_flushes() to be mostly for
application barriers.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38707>
This is the last level layer of emission, we want the tracking to be
added above that, so that when flushing of previously accumulated
reasons happens, another pointless reason isn't added.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38542>
Sadly this probably won't change anything in terms of perf as the CCS
engine has a bunch of other restrictions.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 243c01c703 ("anv/iris: implement Wa_18040903259")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38484>
This helps for debug when wanting to check which pipeline mode the
driver has selected for a given section of a frame.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38317>
These vertex fetch flushes aren't required in gen9+ because the display
driver will take care of this invalidation on QueueSubmit. So let's remove it.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38317>
Use tristate for the aligned setting, otherwise it is always
first disabled which contributes to the condition if we set the
new stride active.
v2: set ByteStride in dword units and take secondary cmdbuf
in to account (Lionel)
Cc: mesa-stable
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Nataraj Deshpande <nataraj.deshpande@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38349>
When EXT_descriptor_buffer is not enabled, we can assume we're in
legacy descriptor mode and not do any switching for secondaries.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Casey Bowman <casey.g.bowman@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38256>
We skip the stall emission for STATE_BASE_ADDRESS since this one can
be skipped on Gfx12.5+ and instead add a new sba tracepoint that has
valid timestamps.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 0147908a89 ("anv: predicate emission of STATE_BASE_ADDRESS")
Reviewed-by: Casey Bowman <casey.g.bowman@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38256>
Note that currently autostrip is disabled globally with
Wa_14021490052 for some gfx versions and steppings.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37975>
Replace direct FILE* operations (fputs/fprintf to stdout) with the
mesa_log_stream API for pipe control debug output.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38157>
For CCS_E on gfx12+, this will cause us to perform full resolves when
transitioning from undefined to a layout which does not support
compression. We don't currently perform such transitions because
compression is always enabled.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36383>
Pre-rasterization stages need a CS stall if they need to wait on the
flushes from a PIPE_CONTROL.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37132>
