The file was removed with earlier commit breaking 'make dist'.
Drop it from Makefile.sources since it's no longer around.
Fixes: 16985eb308 ("vc4: Switch to using the libdrm-provided
vc4_drm.h.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Without this GCC 4.8.x throws below error:
error: invalid initialization of non-const reference of type
'clover::llvm::compat::raw_ostream_to_emit_file {aka llvm::raw_svector_ostream&}'
from an rvalue of type '<brace-enclosed initializer list>'
v2: change commit title and add error message like Eric Engestrom requested
Signed-off-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97019
[ Francisco Jerez: Trivial formatting fix. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This exposes OpenGL 4.1 on Maxwell (tested on GM107 and GM206).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
PFETCH, actually ISBERD on GM107+ ISA only accepts a GPR for src0.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The number of outputs patch (limited to 255) has moved in the TCP
header, but blob seems to also set the old position. Also, the high
8-bits are now located inbetween the min/max parallel output read
address at position 20.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
This cuts down the overhead of si_dump_shader when ddebug is capturing
shader logs, which is done for every draw call unconditionally (that's
quite a lot of work for a draw call).
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
For good performance while being able to generate decent hang reports.
The report doesn't contain the parsed IB and the buffer list, but it
isolates the draw call and dumps shaders while not having to flush
the context.
This is for GPU hangs that are harder to reproduce and require interactive
playing for minutes or even hours.
dd_pipe.h explains some implementation details. Initializing, copying
(recording) and clearing states is most of the code.
The performance should be at least 50% of the normal performance depending
on the circumstances. (i.e. 50% is expected to be the worst case scenario,
not the best case) The majority of time is spent in
dump_debug_state(PIPE_DUMP_CURRENT_SHADERS) and that's after all
the optimizations in later patches. There is no obvious way to optimize
that further.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The pipelined hang detection mode will not want to dump everything.
(and it's also time consuming) It will only dump shaders after a draw call
and then dump the status registers separately if a hang is detected.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It is necessary to reuse existing BOs when dmabufs are imported. There
are 2 cases that need to be handled. dmabufs can be created/exported and
imported by the same process and can be imported multiple times.
Copying other drivers, add a hash table to track exported BOs so the
BOs get reused.
v2: Whitespace fixup (by anholt)
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We could use the nir_shader_gather_info() pass to update it after the
fact, but this is what glsl_to_nir and prog_to_nir do.
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Enable H.264 VAAPI encoding through config. Currently only H.264 baseline is supported. Encode entrypoint is not accepted by driver.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Frame rate can be passed to driver either through VAEncSequenceParameterBufferType or VAEncMiscParameterTypeFrameRate. Previous code only implement the former one, which is used by Gstreamer-Vaapi. Now adding implementation for VAEncMiscParameterTypeFrameRate. Also adding default frame rate as 30 just in case application never provides frame rate information to driver.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Add environmental variable to disable interlace mode. At VAAPI decoding stage, driver can not distinguish b/w pure decoding case and transcoding case. And since interlace encoding is not supported, we have to disable interlace for transcoding case. The temporary solution is to use enviromental variable to disable interlace mode.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Add some hardcoded values hardware needs mainly for rate control purpose. With previously hardcoded values for OMX, the rate control result is not correct. This change fixed the rate control result by setting correct values for Vaapi.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Add necessary functions/changes for VAAPI encoding to buffer and picture. These changes will allow driver to handle all Vaapi encode related operations. This patch doesn't change the Vaapi decode behaviour.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Rate control method is passed from app to driver through config attrib list.
That is why we need to store this rate control method to config. And later
on, we will pass this value to context->desc.h264enc.rate_ctrl.rate_ctrl_method.
v2 (chk): fix broken build and commit message
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
For putimage call, if image format is yv12 (or IYUV with U V field swap) and
surface format is nv12, then we need to convert yv12 to nv12 and then copy
the converted data from image to surface. We can't use the existing logic
where surface is destroyed and re-created with yv12 format.
v2 (chk): fix some compiler warnings and commit message
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Add function to copy from yv12 image to nv12 surface for VAAPI putimage call.
We need this function in VaPutImage call where copying from yv12 image to nv12
surface for encoding. Existing function can't be used because it only work for
copying from yv12 surface to nv12 image in Vaapi.
v2: cleanup variable types and commit message
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
VAAPI passes PIPE_VIDEO_ENTRYPOINT_ENCODE as entry point for encoding case. We
will save this encode entry point in config. config_id was used as profile
previously. Now, config has both profile and entrypoint field, and config_id is
used to get the config object. Later on, we pass this entrypoint to
context->templat.entrypoint instead of always hardcoded to
PIPE_VIDEO_ENTRYPOINT_BITSTREAM for decoding case previously. Encode entrypoint
is not accepted by driver until we enable Vaapi encode in later patch.
v2 (chk): fix commit message to match 80 chars, use switch instead of ifs,
fix memory leaks in the error path, implement vlVaQueryConfigEntrypoints
as well, drop VAEntrypointEncPicture (only used for JPEG).
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This fixes a bunch of multisample piglit tests on GM206, like
bin/arb_texture_multisample-texelfetch 2 -auto -fbo
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
It's illegal to have neg modifiers on both sources for OP_ADD,
and it's illegal to have OP_SUB with just src0 neg.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
We need "NULL" state to be a valid bit in the bitmask, because timestamp
queries are not restricted to draw/etc stages (ie. the only commands to
submit may just be to read the timestamp). And just because there are
no draws, isn't a reason to skip the flush and return zero.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since commit d938b8c, the sample locations are no longer set unconditionally,
so we need to set the atom to dirty on all chips, not just Polaris.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
The regression was introduced by commit d938b8c. The problem here is that in
order to use the small primitive filter, we need to explicitly set the sample
locations to 0. But the DB doesn't properly process the change of sample
locations without a flush, and so we can end up with incorrect Z values.
Instead of doing a flush, just disable the small primitive filter when MSAA
is force-disabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96908
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
v2: no need for break after an unreachable (Matt Turner)
Signed-off-by: Francesco Ansanelli <francians@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
