See the comments for _mesa_rebase_rgba_float() for details.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=46679
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit ad897fff77)
These will be used by glReadPixels() and glGetTexImage() to fix issues
with reading GL_LUMINANCE and other formats.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 774c402765)
The linked list of memory allocations was not protected by a mutex.
This lead to sporadic failures with multi-threaded apps.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Based on a patch submitted by Vic Lee. The other part of his patch
which checked the fs pointer wasn't needed.
This fixes a crash when clear() is called before any VS or FS is set.
But this can only happen when the driver is used without the Mesa
state tracker.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 9917988223)
draw module calls back into the driver and sets certain parts
of the state to whatever it needs, unfortunately unless you
get the ordering of calls to draw just right you'll end up
reseting your own driver state. That's what was happening to us
draw module would under certain conditions reset our own driver
state.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 831de96db8)
We were inverting the meaning of the stencil op flags: in svga/d3d
the normal incr/decr wraps and the SAT ops clamp.
This fixes piglit failures (at least stencil-twoside and stencil-wrap).
We should backport this everywhere we can.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 5d9bfc4d3f)
In certain situations API's will call pipe->clear which doesn't
require fragment shader, but then we'd try to verify the pipeline
and assume fragment shader was always set. This was leading to
crash when API would just call simple clear's before anything else.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit cff0eac702)
Mesa has a fast path for the generic fallback when using glReadPixels
for RGBA data which uses memcpy. However it was really difficult to
hit this case because it would not be used if any transferOps are
enabled. Any type apart from floating point or non-normalized integer
types (so any of the common types) would force enabling clamping so
the fast path could not be used. This patch makes it ignore clamping
when determining whether to use the fast path if the data type of the
buffer is an unsigned normalized type because in that case clamping
will not have any effect anyway.
https://bugs.freedesktop.org/show_bug.cgi?id=46631
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit d9c4209777)
Some backends may advertise more temps than SVGA3D_TEMPREG_MAX, but the
driver is hardwired to only support up to the value defined by
SVGA3D_TEMPREG_MAX, so clamp to it.
Reviewed-by: Brian Paul <brianp@vmware.com>
While the ARB_map_buffer_range extension spec says nothing about these
queries -- they were added in GL 3.0 --, it seems like this could be an
error in the extension spec. This is one of the extensions, like
ARB_framebuffer_object, that "back ports" OpenGL 3.0 functionality to
previous versions. These extensions are supposed to provide identical
functionality to OpenGL 3.0. The other cases of mismatches have been
determined to be bugs in the extension specs.
And tools like apitrace rely on such queries to function properly.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
KILP instruction inside IF blocks were being lowered to an unconditional
KIL. Since r300 doesn't support branching, when the IF's were lowered
to conditional moves, the KIL would always be executed. This is not a
problem with the mesa state tracker, because the GLSL compiler handles
lowering IF's, but this bug was appearing in the VDPAU state tracker,
which does not use the GLSL compiler.
(cherry picked from commit 342cac7166)
r300g is able to sleep until a fence completes rather than busywait because
it creates a special buffer object and relocation that stays busy until the
CS containing the fence is finished.
Copy the idea into r600g, and use it to sleep if the user asked for an
infinite wait, falling back to busywaiting if the user provided a timeout.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cd03b933c)
Conflicts:
src/gallium/drivers/r600/r600_pipe.c
Noticed by taiu on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e1495b2d9)
Conflicts:
src/gallium/drivers/r600/evergreen_state.c
Noticed by taiu on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit acca690c25)
Conflicts:
src/gallium/drivers/r600/evergreen_state.c
I recently discovered this text in the BSpec. It seems wise to comply,
though I haven't observed it to fix anything yet.
Fixes a regression in glean/fbo since 28cfa1fa21.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45221
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 709f50928e)
Commit dc7f449d1a introduced a new method
for avoiding MOVs: try to rewrite the destination of the instruction
that produced the RHS so it writes into the LHS.
Unfortunately, this is not safe for swizzled texturing operations, as
they return a set of four contiguous registers. Consider the following:
(assign (x)
(var_ref vec_ctor_x)
(swiz x (tex vec4 (var_ref m_sampY) (var_ref m_cordY) 0 1 ())))
In this case, the source and destination registers are equal, since
reg_offset is 0 for both. Yet, this is only a partial move: the texture
operation generates four registers, and the LHS only covers one.
Fixes color distortion in XBMC when using GLSL shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44333
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 4b27406820)
Certain instructions write more than one register. Texturing, for
example, returns 4 registers. (We set rlen to 4 even for TXS and float
shadow sampling.) Some math functions return 2. Most return 1.
The next commit introduces a use of this function.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8ab02b5118)
If the generated shader for _TexEnvProgram is empty, force the use of
the fixed-function code. Otherwise, go ahead and use the shader.
This works around a mysterious issue on i915 where fixed-function
software fallbacks are not working correctly.
This isn't really the fix we want, but it works around the issue.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45872
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45876
(cherry picked from commit 3e22d4e5fc)
This fixes build errors like
In file included from glapi_dispatch.c:91:
../../../src/mapi/glapi/glapitemp.h:4641: error: no previous prototype for
'glDrawBuffersNV'
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Lucas Stach <dev@lynxeye.de>
(cherry picked from commit 8f3be33985)
Reallocate/resize decompress FBO only if texture image width/height is
greater than existing decompress FBO width/height.
This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 66bf25f1a2)
Commit 2e5a1a2 (intel: Convert from GLboolean to 'bool' from
stdbool.h.) converted the "specoffset" local variable (in
intel_tris.c) from a GLboolean to a bool. However, GLboolean was the
wrong type for specoffset--it should have been a GLuint (to match the
declaration of specoffset in struct intel_context).
This patch changes specoffset to the proper type.
Fixes piglit test general/two-sided-lighting-separate-specular.
This is a candidate for stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45917
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6b0a07f9ce)
Fix an access to uninitialized memory pointed out by valgrind in
glsl_to_tgsi_visitor::simplify_cmp(void).
Note: This is a candidate for the 8.0 branch.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
(cherry picked from commit 1d01429c6a)
It turns out the same messages work on gen7, we were just being paranoid.
Fixes the penumbra shadows mode of Lightsmark since the register
allocation fix.
NOTE: This is a candidate for release branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 93831a54c7)
We just abort later, but at least this should result in more
informative bug reports.
NOTE: This is a candidate for release branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a7f46eadea)
This patch adds the pixel store operations in decompress_texture_image().
decompress_texture_image() is used in glGetTexImage() for compressed
textures with unsigned, normalized values.
It also fixes the failures in intel oglconform pxstore-gettex due to
following sub test cases:
- Test all mipmaps with byte swapping enabled
- Test all small mipmaps with all allowable alignment values
- Test subimage packing for all mipmap levels
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40864
Note: This is a candidate for stable branches
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 4042702591)
Marek: this fixes a firefox crash and maybe even:
https://bugs.freedesktop.org/show_bug.cgi?id=45943
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 094eeff199)
Fixes a regression from commit 660ed923de.
The basic idea is to look at the format of the dest renderbuffer and
choose either GLubyte or GLfloat for colors. The previous code used
_mesa_format_to_type_and_comps() which could return a bunch types other
than ubyte/float.
Determine the datatype at renderbuffer mapping time to avoid frequent
calls to the format query functions.
NOTE: This is a candidate for the 8.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45578
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45577
(cherry picked from commit bd1ae51b13)
Ironlake appears to check our pointer against the General State Base
Address upper bound, rather than ignoring the zero bound as it ought.
Unfortunately, since we leave GSBA set to zero, there is no logical
upper bound. Set it to the maximum possible value, which should work
since our virtual addresses only go up to 2GB.
+94 piglits.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28924
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3340b47c22)
The mapping from TEXTURE_x_INDEX to GL_TEXTURE_x was broken in
alloc_proxy_textures() because the elements in the targets[] array
were in the wrong order.
This didn't actually cause any failures since we never really use the
proxy texture's Target field. But let's get it right.
NOTE: This is a candidate for the 8.0 branch.
(cherry picked from commit d925b0d4a7)
This is a combination of 4 commits. The first commit rewrites the HiZ op,
and remaining three fix bugs introduced by the rewrite.
======== commit 1 ========
i965: Rewrite the HiZ op
The HiZ op was implemented as a meta-op. This patch reimplements it by
emitting a special HiZ batch. This fixes several known bugs, and likely
a lot of undiscovered ones too.
==== Why the HiZ meta-op needed to die ====
The HiZ op was implemented as a meta-op, which caused lots of trouble. All
other meta-ops occur as a result of some GL call (for example, glClear and
glGenerateMipmap), but the HiZ meta-op was special. It was called in
places that Mesa (in particular, the vbo and swrast modules) did not
expect---and were not prepared for---state changes to occur (for example:
glDraw; glCallList; within glBegin/End blocks; and within
swrast_prepare_render as a result of intel_miptree_map).
In an attempt to work around these unexpected state changes, I added two
hooks in i965:
- A hook for glDraw, located in brw_predraw_resolve_buffers (which is
called in the glDraw path). This hook detected if a predraw resolve
meta-op had occurred, and would hackishly repropagate some GL state
if necessary. This ensured that the meta-op state changes would not
intefere with the vbo module's subsequent execution of glDraw.
- A hook for glBegin, implemented by brwPrepareExecBegin. This hook
resolved all buffers before entering
a glBegin/End block, thus preventing an infinitely recurring call to
vbo_exec_FlushVertices. The vbo module calls vbo_exec_FlushVertices to
flush its vertex queue in response to GL state changes.
Unfortunately, these hooks were not sufficient. The meta-op state changes
still interacted badly with glPopAttrib (as discovered in bug 44927) and
with swrast rendering (as discovered by debugging gen6's swrast fallback
for glBitmap). I expect there are more undiscovered bugs. Rather than play
whack-a-mole in a minefield, the sane approach is to replace the HiZ
meta-op with something safer.
==== How it was killed ====
This patch consists of several logical components:
1. Rewrite the HiZ op by replacing function gen6_resolve_slice with
gen6_hiz_exec and gen7_hiz_exec. The new functions do not call
a meta-op, but instead manually construct and emit a batch to "draw"
the HiZ op's rectangle primitive. The new functions alter no GL
state.
2. Add fields to brw_context::hiz for the new HiZ op.
3. Emit a workaround flush when toggling 3DSTATE_VS.VsFunctionEnable.
4. Kill all dead HiZ code:
- the function gen6_resolve_slice
- the dirty flag BRW_NEW_HIZ
- the dead fields in brw_context::hiz
- the state packet manipulation triggered by the now removed
brw_context::hiz::op
- the meta-op workaround in brw_predraw_resolve_buffers (discussed
above)
- the meta-op workaround brwPrepareExecBegin (discussed above)
Note: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43327
Reported-by: xunx.fang@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44927
Reported-by: chao.a.chen@intel.com
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 7b36c68ba6)
======== commit 2 ========
i965/gen7: Fix GPU hangs from the HiZ op.
The wm max threads is in the same dword as the dispatch enable. The
hardware gets super angry if you set max threads to 0, even if you
aren't dispatching threads.
(cherry picked from commit e5b225afbd)
======== commit 3 ========
i965/gen7: Fix the length of the DS state packet in the HiZ op.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit cdcfaa64e3)
======== commit 4 ========
i965/gen7: Fix the length of the MULTISAMPLE state packet in the HiZ op.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit a7750c9fb5)
width, height parameter in glTexImage2D() includes: texture image
width + 2 * border (if any). So when doing the texture size check
in _mesa_test_proxy_teximage() width and height should not exceed
maximum supported size for target texture type + 2 * border.
i.e. 1 << (ctx->Const.MaxTextureLevels - 1) + 2 * border
Texture border is anyway stripped out before it is given to intel
or gallium drivers.
This patch fixes Intel oglconform test case:
max_values negative.textureSize.textureCube
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44970
Note: This is a candidate for mesa 8.0 branch.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit ea228d97f8)
I wasn't seeing it be needed because of the previous bug.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit b8c9252570)
Specifially, this being present works around a bug in Unigine
Sanctuary on i965 which previously resulted in bad rendering.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ff2497dca3)
NOTE: Compared to ff2497d this does not install the default drirc.
The pre-automake build system is sufficiently braindamaged to make
this exceptionally difficult.
Fixes piglit switch-case-duplicated.vert.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 57e44371a5)
The error message I chose matches gcc's error. Fixes piglit
switch-case-duplicated.vert.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 140632190c)
Otherwise, the upcoming error messages said the location was 0:0(0).
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 663dcbbffe)
It's not quite spelled out in the spec text, but the grammar indicates
that only constant values are allowed as switch() case labels (and
only constant values make sense, anyway).
Fixes piglit glsl-1.30/compiler/switch-statement/switch-case-uniform-int.vert.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 2c3e10e719)
This stuffs them all in a struct for sanity. Fixes piglit
glsl-1.30/execution/switch/fs-uniform-nested.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 22d81f154f)
For all the extension entrypoints using the get_buffer() helper, they
wanted the same error handling. In some cases, the error was doing
the same error return whether target was a bad enum, or a user buffer
wasn't bound.
(Actually, GL_ARB_map_buffer_range doesn't specify the error for a zero
buffer being bound for MapBufferRange, though it does for
FlushMappedBufferRange. This appears to be an oversight).
Fixes piglit GL_ARB_copy_buffer/negative-bound-zero.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit f20fb80a91)
In commit 6ecee54a9a a call to
talloc_reference was replaced with a call to talloc_steal. This was in
preparation for moving to ralloc which doesn't support reference
counting.
The justification for talloc_steal within token_list_append in that
commit is that the tokens are being copied already. But the copies are
shallow, so this does not work.
Fortunately, the lifetime of these tokens is easy to understand. A
token list for "replacements" is created and stored in a hash table
when a function-like macro is defined. This list will live until the
macro is #undefed (if ever).
Meanwhile, a shallow copy of the list is created when the macro is
used and the list expanded. This copy is short-lived, so is unsuitable
as a new parent.
So we can just let the original, longer-lived owner continue to own
the underlying objects and things will work.
This fixes bug #45082:
"ralloc.c:78: get_header: Assertion `info->canary == 0x5A1106'
failed." when using a macro in GLSL
https://bugs.freedesktop.org/show_bug.cgi?id=45082
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for stable release branches.
(cherry picked from commit cd2e2187cb)
