When glCompressedTexImage is called the internalFormat is a specific
format for the incoming image and the the hardware format should be
the same (since we never do format transcoding). So use the simpler
_mesa_glenum_to_compressed_format() function. This change is also
needed for the next patch.
Note: This is a candidate for the stable branches.
(cherry picked from commit 478056b81a)
GLX uses mapi/glapi/libglapi.la, which is only built for OpenGL.
If the user specified --enable-xlib-glx --disable-opengl, error out, as these
cannot be both observed at the same time. If the user just specified
--disable-opengl but not --disable-glx, print a warning and disable GLX as
well.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59364
Tested-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit 3b888f534c)
Check that the return value from xcb_dri2_swap_buffers_reply is
non-NULL before accessing the struct members.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 67e7263e45)
We never really have multisampling with one sample per pixel.
See also http://bugs.freedesktop.org/show_bug.cgi?id=59873
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit c80bacba2e)
See previous commit for more info.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 2180f32972)
The swrast fragment program interpreter has trouble computing the
right texture LOD because it doesn't have easy access to input
derivatives. This causes the GLSL-based meta generate mipmap code
to fetch texels from the wrong mipmap level.
One possible fix would be to set the GL_TEXTURE_MIN/MAX_LOD parameters
to limit sampling from the right level. But let's just use the
_mesa_generate_mipmap() fallback since it's a lot faster than using
the fragment shader interpreter.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=54240
Note: This is a candidate for the 9.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 89551ae04f)
In the GLSL 1.30 spec, section 4.3.6 ("Outputs") says:
"If a vertex output is a signed or unsigned integer or integer
vector, then it must be qualified with the interpolation qualifier
flat."
The GLSL ES 3.00 spec further clarifies, in section 4.3.6 ("Output
Variables"):
"Vertex shader outputs that are, *or contain*, signed or unsigned
integers or integer vectors must be qualified with the
interpolation qualifier flat."
(Emphasis mine.)
The language in the GLSL ES 3.00 spec is clearly correct and should be
applied to all shading language versions, since varyings that contain
ints can't be interpolated, regardless of which shading language
version is in use.
(Note that in GLSL 1.50 the restriction is changed to apply to
fragment shader inputs rather than vertex shader outputs, to
accommodate the fact that in the presence of geometry shaders, vertex
shader outputs are not necessarily interpolated. That will be
addressed by a future patch).
NOTE: This is a candidate for stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 93c913485e)
From GLSL ES 3.00 section 4.5.4 ("Default Precision Qualifiers"):
"The precision statement
precision precision-qualifier type;
can be used to establish a default precision qualifier. The type
field can be either int or float or any of the sampler types, and
the precision-qualifier can be lowp, mediump, or highp."
GLSL ES 1.00 has similar language. GLSL 1.30 doesn't allow precision
qualifiers on sampler types, but this seems like an oversight (since
the intention of including these in GLSL 1.30 is to allow
compatibility with ES shaders).
Previously, Mesa followed GLSL 1.30 and only allowed default precision
qualifiers to be set for float and int. This patch makes it follow
GLSL ES rules in all cases.
Fixes Piglit tests default-precision-sampler.{vert,frag}.
Partially addresses https://bugs.freedesktop.org/show_bug.cgi?id=60737.
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d5948f2f5e)
With the llvm patches, fixing 14 piglit tests in total.
v2: increase the const limit
v3: document the const limit
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 8c80894fb3)
This reverts commit 2906e2034c.
Fixes a regression in the glean depthStencil test.
Reverting this does not affect any tests in es3conform, so a more recent
patch must have also fixed the failure this one was intended to fix.
Reported-by: lu hua <huax.lu@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59494
(cherry picked from commit a527b2192e)
Seems that alpha test being enabled confuse the GPU on the order in
which it should perform the Z testing. So force the order programmed
throught db shader control.
v2: Only force z order when alpha test is enabled
v3: Update db shader when binding new dsa + spelling fix
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 974b482aca)
In OpenGL 4.3, new language was added that would require
this check. But, if this check results in broken applications
then perhaps it will be reversed.
For now, remove this check and re-evaluate when
desktop GL 4.3 is closer.
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The third argument of AC_ARG_WITH is evaluated for any provided value,
not only on --with-, so it must not force-enable the feature
Also, setting $with_llvm_shared_libs in the opencl check was overriding
the user switch
https://bugs.freedesktop.org/show_bug.cgi?id=59851
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
(cherry picked from commit 1e857130f0)
The blit must be aligned on 8 horizontal block.
v2: no need to align the reminder
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 323a448825)
If the same context try to flink and open the object, use the
same bo struct instead of opening a new gem handle for the object.
This way we avoid avoid having 2 different handle pointing to the
same kernel object which can latter lead to trouble with virtual
address.
Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=60200
Signed-off-by: Martin Andersson <g02maran@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit a37835c8ed)
Previously we were relying on CFLAGS_FOR_BUILD to be the same as CFLAGS
when not cross compiling, but this assumption didn't take into
consideration 32-bit builds on 64-bit systems. More generally, not
honoring CFLAGS is bad.
Automake is evidently too stupid to accept
if CROSS_COMPILING
CC = @CC_FOR_BUILD@
...
else
CC = @CC@
endif
without warning that CC has been already defined. The warnings are
harmless, but I'd prefer to avoid future reports about them, so define
proxy variables, which are assigned inside the conditional and then
unconditionally assigned to CC et al.
NOTE: This is a candidate for the 9.1 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59737
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60038
(cherry picked from commit 2db1f73849)
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
(cherry picked from commit 11bd1b0f58)
Make sure one can identify virtual address failure from allocation
failure.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 9a47684564)
The exa core will already set the pointer to NULL prior calling
the callback function. So don't bail out in the callback if it's
already NULL.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 3310acdf47)
Since transform feedback needs to be able to access individual fields
of varying structs, we can no longer match up the arguments to
glTransformFeedbackVaryings() with variables in the vertex shader.
Instead, we build up a hashtable which records information about each
possible name that is a candidate for transform feedback, and then
match up the arguments to glTransformFeedbackVaryings() with the
contents of that hashtable.
Populating the hashtable uses the program_resource_visitor
infrastructure, so the logic is shared with how we handle uniforms.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 99b78337e3)
Previously, transform feedback varyings were parsed in an ad-hoc
fashion that wasn't compatible with structs (or array of structs).
This patch makes it use parse_program_resource_name(), which correctly
handles both.
Note that parse_program_resource_name()'s technique for handling
mal-formed input strings is to simply let them through and rely on the
fact that a future name lookup will fail. Because of this,
tfeedback_decl::init() no longer needs to return a boolean error
code--it always succeeds, and if the input was mal-formed the error
will be detected later.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 53febac02c)
There's actually nothing uniform-specific in uniform_field_visitor.
It is potentially useful for all kinds of program resources (in
particular, future patches will use it for transform feedback
varyings).
This patch renames it to program_resource_visitor, and clarifies
several comments, to reflect the fact that it is useful for more than
just uniforms.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit b4db34cc4c)
The parsing logic is moved to a new function in the GLSL module,
parse_program_resource_name(). This name was chosen because it should
eventually be useful for handling everything that OpenGL 4.3 calls
"program resources" (e.g. uniforms, vertex inputs, fragment outputs,
and transform feedback varyings).
Future patches will make use of this function for linking transform
feedback varyings.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit b92900d26a)
Now that we have support for overriding alpha to 1.0, we can handle
blitting between these formats in either direction.
For now, we only support two XRGB formats: MESA_FORMAT_XRGB8888 and
MESA_FORMAT_RGBX8888_REV. Most places only appear to worry about the
former, so ignore the latter for now. We can always add it later.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
(cherry picked from commit 7d467f3c15)
Currently, Blorp requires the source and destination formats to be
equal. However, we'd really like to be able to blit between XRGB and
ARGB formats; our BLT engine paths have supported this for a long time.
For ARGB -> XRGB, nothing needs to occur: the missing alpha is already
interpreted as 1.0. For XRGB -> ARGB, we need to smash the alpha
channel to 1.0 when writing the destination colors. This is fairly
straightforward with blending.
For now, this code is never used, as the source and destination formats
still must be equal. The next patch will relax that restriction.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
(cherry picked from commit c0554141a9)
The BLT engine has many limitations. Currently, it can only blit
X-tiled buffers (since we don't have a kernel API to whack the BLT
tiling mode register), which means all depth/stencil operations get
punted to meta code, which can be very CPU-intensive.
Even if we used the BLT engine, it can't blit between buffers with
different tiling modes, such as an X-tiled non-MSAA ARGB8888 texture
and a Y-tiled CMS ARGB8888 renderbuffer. This is a fundamental
limitation, and the only way around that is to use BLORP.
Previously, BLORP only handled BlitFramebuffer. This patch adds an
additional frontend for doing CopyTexSubImage. It also makes it the
default. This is partly to increase testing and avoid hiding bugs,
and partly because the BLORP path can already handle more cases. With
trivial extensions, it should be able to handle everything the BLT can.
This helps PlaneShift massively, which tries to CopyTexSubImage2D
between depth buffers whenever a player casts a spell. Since these
are Y-tiled, we hit meta and software ReadPixels paths, eating 99% CPU
while delivering ~1 FPS. This is particularly bad in an MMO setting
because people cast spells all the time.
It also helps Xonotic in 4X MSAA mode. At default power management
settings, I measured a 6.35138% +/- 0.672548% performance boost (n=5).
(This data is from v1 of the patch.)
No Piglit regressions on Ivybridge (v3) or Sandybridge (v2).
v2: Create a fake intel_renderbuffer to wrap the destination texture
image and then reuse do_blorp_blit rather than reimplementing most
of it. Remove unnecessary clipping code and conditional rendering
check.
v3: Reuse formats_match() to centralize checks; delete temporary
renderbuffers. Reorganize the code.
v4: Actually copy stencil when dealing with separate stencil buffers but
packed depth/stencil formats. Tested by a new Piglit test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com> [v4]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v3]
Reviewed-and-tested-by: Carl Worth <cworth@cworth.org> [v2]
Tested-by: Martin Steigerwald <martin@lichtvoll.de> [v3]
(cherry picked from commit 0b3bebbaac)
I need to use this from C++ code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 29aef6cce8)
Ivybridge doesn't appear to have the same errata as Sandybridge; no
corruption was observed by setting it to more than the minimal correct
value. It's possible that we were simply lucky, since the URB entries
are 1024-bit on Ivybridge vs. 512-bit Sandybridge. Or perhaps the
underlying hardware issue is fixed.
Either way, we may as well program the minimum value since it's now
readily available, likely to be more efficient, and possibly more
correct.
v2: Use GEN7_SBE_* defines rather than GEN6_SF_*. (A copy and paste
mistake.) They're the same, but using the right names is better.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 44aa2e15f6)
(This commit message was primarily written by Paul Berry, who explained
what's going on far better than I would have.)
Previous to this patch, we thought that the only restrictions on
3DSTATE_SF's URB read length were (a) it needs to be large enough to
read all the VUE data that the SF needs, and (b) it can't be so large
that it tries to read VUE data that doesn't exist. Since the VUE map
already tells us how much VUE data exists, we didn't bother worrying
about restriction (a); we just did the easy thing and programmed the
read length to satisfy restriction (b).
However, we didn't notice this erratum in the hardware docs: "[errata]
Corruption/Hang possible if length programmed larger than recommended".
Judging by the context surrounding this erratum, it's pretty clear that
it means "URB read length must be exactly the size necessary to read all
the VUE data that the SF needs, and no larger". Which means that we
can't program the read length based on restriction (b)--we have to
program it based on restriction (a).
The URB read size needs to precisely match the amount of data that the
SF consumes; it doesn't work to simply base it on the size of the VUE.
Thankfully, the PRM contains the precise formula the hardware expects.
Fixes random UI corruption in Steam's "Big Picture Mode", random terrain
corruption in PlaneShift, and Piglit's fbo-5-varyings test.
NOTE: This is a candidate for all stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56920
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60172
Tested-by: Jordan Justen <jordan.l.justen@intel.com> (v1/Piglit)
Tested-by: Martin Steigerwald <martin@lichtvoll.de> (PlaneShift)
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 09fbc29828)
The maximum SF source attribute is necessary to compute the Vertex URB
read length properly, which will be done in the next commit.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5e9bc7bd12)
The next patch will benefit from easy access to the source attribute
number and whether or not we're swizzling. It doesn't want the final
attr_override DWord form, however.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b3efc5bea8)
The maximum number of URB entries come from the 3DSTATE_URB_VS and
3DSTATE_URB_GS state packet documentation; the thread count information
comes from the 3DSTATE_VS and 3DSTATE_PS state packet documentation.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit 9add4e8038)
Fixes side effect in assertion defects reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 1559994cba)
In the documentation for BindBufferRange, OpenGL specs from 3.0
through 4.1 contain this language:
"The error INVALID_VALUE is generated if size is less than or
equal to zero or if offset + size is greater than the value of
BUFFER_SIZE."
This text was dropped from OpenGL 4.2, and it does not appear in the
GLES 3.0 spec.
Presumably the reason for the change is because come clients change
the size of the buffer after calling BindBufferRange. We don't want
to generate an error at the time of the BindBufferRange call just
because the old size of the buffer was too small, when the buffer is
about to be resized.
Since this is a deliberate relaxation of error conditions in order to
allow clients to work, it seems sensible to apply it to all versions
of GL, not just GL 4.2 and above.
(Note that there is no danger of this change allowing a client to
access data beyond the end of a buffer. We already have code to
ensure that that doesn't happen in the case where the client shrinks
the buffer after calling BindBufferRange).
Eliminates a spurious error message in the gles3 conformance test
"transform_feedback_offset_size".
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 04f0d6cc22)
This matches the behavior of the Windows driver, but a bspec reference
should would be nice.
NOTE: This is a candidate for the 9.0 and 9.1 branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f29ab4ece5)
Should have been done in d9948e49 but I missed it because
MAX_VARYING_FLOATS doesn't appear in the ES 3 spec, but is the same
value as MAX_VARYING_COMPONENTS.
NOTE: Candidate for the 9.1 branch
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Also, add assertions to stress that render targets don't support scaled
formats.
20 more little piglits.
(cherry picked from commit 46dd16bca8b4526e46badc9cb1d7c058a8e6173e)
Append the overloaded vector type used for passing in the addressing
parameters.
Without this, LLVM uses the same function signature for all those types,
which cannot work.
Fixes problems e.g. with FlightGear and Red Eclipse.
(cherry picked from commit 1b3afea30de757815555d9eb1d6e72e2586d6a0c)
Was using the pixel size instead of the number of block for the slice
tile max computation which resulted in dma writing at wrong address.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
