Use more specific verbs to avoid confusion:
set -> apply
get -> compute
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21984>
We never implemented it, and having broken mipmaps works out better
for applications and CTS. Actually implementing stencil adjust is
going to be a major pain due to stuff like the GENERAL layout.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21869>
Block compressed + linear format is not supported in addrlib. But these
surface can be used as transfer resource. RADEON_SURF_NO_TEXTURE flag
indicates not to set flags.texture flag in gfx9_compute_surface().
This will help to fix the vkCreateImage() crash where block
compressed + linear format image is requested.
v2: combine RADEON_SURF_NO_TEXTURE to below line (Marek Olšák)
v1: add RADEON_SURF_NO_TEXTURE flag (Marek Olšák)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21422>
On GFX11, VRS rate images can't use linear tiling and the swizzle mode
must be either SW_Z or SW_R.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20333>
As explained in the previous commit, GFX9+ has issues with addressing
mipmaps in block-compressed images. In the case of copy commands, we fix
this by doing an extra copy for the missing blocks.
For GFX10, the mipmap layout in memory allows us to do better than that. We
can change the base level of the descriptor to one level bigger than the
requested level and adjust the extent and address to match. This is done by
ComputeNonBlockCompressedView in addrlib. Thus on GFX10 we can skip the
fixup copy workaround, and this will also fix cases outside of explicit
copy commands.
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17970>
GFX9+ hardware has an issue where mipmap degradations are calculated
incorrectly due to using divide-by-two integer math and certain mipmap
sizes lose blocks.
This issue has been documented before, and we ported a workaround from
AMDVLK to increase the extent that is programmed into the descriptor, so
that the hardware arrives at the correct result. However, this is
insufficient as we cannot safely increase the extent beyond the physical
extent of the image in memory. If we can't increase it enough, the image
will still be missing blocks.
But there is still hope. In cases where RADV is responsible for copying to
or from an image (such as vkCmdCopyBufferToImage/vkCmdCopyImageToBuffer),
we can perform a second copy of the blocks that the hardware excluded so
that the resulting image is complete. This is another workaround from
AMDVLK.
This fixes corrupted textures in Halo: The Master Chief Collection.
v2: Add RADV_CMD_FLAG_INV_L2 | RADV_CMD_FLAG_INV_VCACHE to flush_bits
just in case (Samuel Pitoiset)
Closes: #3347
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17970>
Currently, we aren't checking if the modifier supports the extent of the image.
DCN only works with !64B && 128B on extents < 4K.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13056>
We need to keep RADV and RadeonSI on the same page about this due to modifiers.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13153>
Helper function to check if a modifier supports DCC image stores.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12862>
This will be used to copy VRS rates to the HTILE buffer.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10187>
For the HTILE equation.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10187>
gfx9_meta_equation will be used to store the HTILE equation.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10187>
The retile map is removed and replaced by direct DCC address computations
in the retile shader using the new function ac_nir_dcc_addr_from_coord.
The RADV code is disabled.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10003>
Only one bit is set in alignments, so store the bit offset (log2) and
change the type from uint32_t to uint8_t.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10083>
Images are always aligned to 256B (enforced by register and descriptor
fields) and limited to 40-bit addresses. This saves some space.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10083>
GFX10 can only compress the first level in the mip tail.
GFX9+ is not yet supported because mips are interleaved.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
For GFX9 I didn't reuse the existing mipmap offset/pitch because
last time we did that there was a revert request from Marek.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7953>
Rework ac_addrlib_create to rely solely on radeon_info without
amdgpu_gpu_info.
No longer need <amdgpu.h> to create ac_addrlib instance.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7811>
