OpenGL 3.0 requires the driver can draw to 8 simultaneous render
targets. Similarly, OpenGL ES 3.0 requires the driver can draw to 4
simultaneous render targets. Fix the version computation logic to take
this into account.
On Mali T720, we support ~all features of OpenGL ES 3.1 except we only
support a single render target. Mali T720 should advertise OpenGL 2.1
and OpenGL ES 2.0 only. With the previous logic, it incorrectly
advertised OpenGL ES 3.1.
v2: Lie about the minimum for GL 3.0 to make freedreno a3xx happy. Add
Emma's reviewed-by.
v3: Update the Mali T720 CI expectations. There are tests that pass on
GLES3 but not GLES2. Unclear if these are dEQP bugs or Mesa bugs, lima
hits the same issues. Add them to the known fails
Note to mesa-stable maintainers: this downgrades the OpenGL version
advertised on Mali T720. As such, this patch should apply to the
unreleased 21.3 (Eric) but should NOT be backported to any released Mesa
versions (21.2 or older should NOT have this patch). This is a bit of a
compromise; Emma agreed with this plan on IRC.
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net> [v2]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> [v2]
Cc: 21.3 mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13455>
(cherry picked from commit 861a35b3bc)
So far only LAVA jobs make use of it, but I guess baremetal could be
extended to have these timeouts as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13441>
(cherry picked from commit 83a0bb007f)
* Update Kconfig for x86_64 and ARM64. Follow the dependency tree of the
kernel modules to make sure that the intended configurations are being
set. Check scripts/merge_config.sh output as well to see if there is
a requested Kconfig not being considered.
For a630 devices:
* Use kernel version with a6xx workaround for frequency scaling
* Enable CONFIG_QCOM_LMH targeting a630 slowness on new kernel
---- Out of tree patches used ----
For a360 device:
* Revert a commit which remove slpi_region from msm8996:
8b0031f8bda2 ("Revert "arm64: msm8996: fix memory region overlap"")
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
(cherry picked from commit 7fea3c6f14)
We've noticed issues with these tests when uprevving Mesa in Chrome OS.
This CI catches some existing failures, and some debug-build assertion
failures as well.
To do this, uprev deqp-runner for its new gtest-runner command. This
runner is not as efficient as I would hope, due to some expensive code in
gtest. I've reported the issue to gtest and it should be easily fixable,
but for now it at least means we get to use the same baseline/skip/flake
handling we have from deqp and piglit runners.
I also fixed build-libdrm for our rootfses to not throw away libdrm's
share directory, which was causing a bunch of test-time spam from radeon's
libdrm when trying to look up its marketing name tables (not that big of a
deal for deqp-runner, but really noisy for piglit and libva-utils which
make gallium screens approximatly per-test).
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13419>
(cherry picked from commit 8fb850651c)
The test names are definitely unique (deqp has specific prefixes, piglit
uses '@' as a separator instead of '.'), so we can just have a single file
regardless of test type. Merges the two groups of xfails together so you
can't mix up which file to edit (I certainly have), and so that we don't
need to introduce yet another set of files when we add gtest for libva.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13517>
(cherry picked from commit bfbc41a9fa)
We have two testsuites with the same format for fails/flakes/skips files,
and test names that are definitely unique. As I'm about to add a third
testsuite (gtest for libva-utils), so let's have just one file each for
fails/flakes/skips instead of one per type of testsuite. This starts the
move with just the bulk rename of deqp.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13517>
(cherry picked from commit 38dff02bfb)
Changing these variables won't do anything for you otherwise.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 440f207a1f)
deqp hasn't been linking against that in quite some time.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 61ca900b69)
This should improve their reliability and speed a little by getting
deqp-runner off of asan. This removes the last jobs setting
TEST_LD_PRELOAD, so remove passing that variable around from other
scripts.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 899174c210)
This is prettier in the log files, less shell code, and for non-suite mode
adds checking that the driver has the right git sha1. Also, no need for
suites to have a DEQP_VER to say which dEQP we should run for the renderer
check.
The version checks can help us make sure that GL version exposed doesn't
accidentally regress, and the ".*git" checks that we're using a git
version of Mesa rather than something that snuck in through distro
packages.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit b978688df6)
We can use the general "how parallel should we go on this runner?" env var
and save a bunch of massaging env var names. Fixes how PIGLIT_PARALLEL
looked like it was useful but actually wasn't passed through to HW
runners.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 9ddfd297e0)
Nobody uses it any more, and you could just put it in DEQP_OPTIONS.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit 59f3a8e6b4)
if no restart indices are found, this draw must be discarded to avoid
crashing later on
Fixes: 583070748c ("util/primconvert: handle rewriting of prim-restart draws with unsupported primtype")
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13630>
(cherry picked from commit bc345281ab)
- Unset depth_cleared_level_mask for non-clear blits. Set the flag after
the clear, so that we don't have to check blitter_running.
- Set depth_cleared_level_mask only when we set depth_clear_value.
Fixes: ff8a930cf7 - radeonsi: add _once suffix to depth_cleared_level_mask
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13603>
(cherry picked from commit 5d3aea49b8)
vertex shader stages that can produce xfb must have
their input size clamped to the compiler define MAX_VARYING
to successfully be able to export an xfb output for each input
fixes KHR-GL46.geometry_shader.limits.max_input_components
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13632>
(cherry picked from commit 5d1b81d8ac)
src can use dcc even for non sdma v5 variants because si_decompress_dcc
is called in si_sdma_copy_image.
Fixes: 46c95047bd ("radeonsi: implement si_sdma_copy_image for gfx7+")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13550>
(cherry picked from commit d86d602ed0)
fbfetch descriptors are uncacheable due to having mixed descriptor types
in the same set, so this needs to always use lazy updating to avoid
exploding the cache and crashing
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13654>
(cherry picked from commit 417477f60e)
sparse binds have to be processed synchronously with cmdbuf recording to
avoid resource object desync in the vk driver, which means they have to be
done in the driver thread instead of the flush thread. this necessitates
adding locking for the queue since there is now a case when submissions occur
in a different thread
fixes illegal multithread usage in KHR-GL46.CommonBugs.CommonBug_SparseBuffersWithCopyOps
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13597>
(cherry picked from commit 3137ff4709)
VVL already prints its messages using configurable settings. there's no
reason for zink to unconditionally repeat them immediately after
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13633>
(cherry picked from commit ac2af149f1)
Lavapipe was hitting asserts in this area due to incorrect bits being
specified.
Set the handle type depending on the sw flag, and set a correct handle
type for the memory host ptrs.
v2: add image export struct to image creation (Jason)
Fixes: 895d3399f7 ("lavapipe: add support for KHR_external_memory_fd")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13615>
(cherry picked from commit a8725ec3dc)
Fixes dEQP-VK.reconvergence.*nesting* tests.
There are cases when cmod is set to an instruction that cannot have
conditional modifier. E.g. following:
find_live_channel(32) vgrf166:UD, NoMask
cmp.z.f0.0(32) null:D, vgrf166+0.0<0>:D, 0d
is optimized to:
find_live_channel.z.f0.0(32) vgrf166:UD, NoMask
v2:
- Add unit test to check cmod is not set to 'find_live_channel' (Matt Turner)
- Update flag_subreg when conditonal_mod is updated (Ian Romanick)
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5431
Fixes: 32b7ba66b0 ("intel/compiler: fix cmod propagation optimisations")
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13268>
(cherry picked from commit 2dbb66997e)
vk_device_init already calls vk_error so this is redundant. Also, it
makes vk_error grumpy to see a VK_ERROR_FEATURE_NOT_PRESENT on an
instance rather than a physical device.
Fixes: 47adb11143 ("lavapipe: Switch to the new vk_error helpers")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13619>
(cherry picked from commit 79f57f6893)
the max driver limit for these is irrelevant if there isn't enough memory
to allocate a buffer of that size
KHR-GL46.texture_buffer.texture_buffer_max_size
cc: mesa-stable
fixes#5568
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13584>
(cherry picked from commit ccfe36fffa)
This has a requirement on the display extensions.
VK-GL-CTS: dEQP-VK.info.instance_extensions
Fixes: 1d574d4860 ("lavapipe: remove display extension support")
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13616>
(cherry picked from commit 75dc302340)
