Previously, we were passing the shader around, we were just calling it
"mem_ctx". However, the nir_shader is (and must be for the purposes of
mark-and-sweep) the mem_ctx so we might as well pass it around explicitly.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
(cherry picked from commit b7eeced3c7)
Like other gen8+ hardware, the hardware automatically scales up thread counts.
We must be careful about the URB sizes since GT4 adds another slice.
One of the existing PCI IDs is actually mislabeled as GT3. Arguably this is a
real bug since the URB size will be wrong. Because this patch is simply meant to
add the missing IDs, that will be fixed in a later patch.
v2: No longer relevant.
v3: Update the wm thread count to support GT4. The WM thread count is used to
determine the maximum scratch space required. Currently the code always
allocates the maximum amount even though lower GT SKUs require less. The formula
is threads_per_psd * subslices_per_slice * slices
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
(cherry picked from commit 7cbd6608f5)
This was causing compilation issues when one of its providers wasn’t
already included before gbm.h.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f3d4d10a1d)
Some constants (like 1.0 and 0.5) could be inlined as immediate inputs
without using their literal value. The r600_bytecode_special_constants()
function emulates the negative of these constants by using NEG modifier.
However some shaders define -1.0 constant and want to use it as 1.0.
They do so by using ABS modifier. But r600_bytecode_special_constants()
set NEG in addition to ABS. Since NEG modifier have priority over ABS one,
we get -|1.0| as result, instead of |1.0|.
The patch simply prevents the additional switching of NEG when ABS is set.
[According to Ivan Kalvachev, this bug was fond via
https://github.com/iXit/Mesa-3D/issues/126 and
https://github.com/iXit/Mesa-3D/issues/127]
Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f75f21a24a)
Without the clamping by NumLevels, the state tracker would reallocate the
texture storage (incorrect) and even fail to copy the base level image
after reallocation, leading to the graphical glitch of
https://bugs.freedesktop.org/show_bug.cgi?id=91993 .
A piglit test has been submitted for review as well (subtest of
arb_texture_storage-texture-storage).
v2: also bypass all calls to st_finalize_texture (suggested by Marek Olšák)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 24c90888ae)
Consider the case of two nearly identical GLSL fragment shaders:
out vec4 color;
void main() { color = vec4(1); }
and
layout(early_fragment_tests) in;
out vec4 color;
void main() { color = vec4(1); }
These shaders compile to the exact same assembly, but have distinct
values for brw_wm_prog_data::early_fragment_tests.
Since these are two independent GLSL shaders, they have different
program keys - notably, brw_wm_prog_key::program_string_id differs.
When uploading the second, brw_upload_cache will find an existing copy
of the assembly in the cache BO, which means matching_data will be
non-NULL. Although we create a second cache item (with the new key
and prog_data), we set item->offset to the existing copy and avoid
re-uploading duplicate assembly.
However, brw_search_cache() would only flag BRW_NEW_*_PROG_DATA if
item->offset differed from the supplied offset. With reuse, both
programs have the same offset, but prog_data changed. We have to
flag it, but failed to.
To fix this, we simply need to check if the aux (prog_data) pointer
changed. If either the assembly or the prog_data differs, flag it.
This fixes a regression since 1bba29ed40,
where Topi fixed brw_upload_cache() to actually reuse identical
assembly. Prior to that, reuse basically never happened due to bugs.
Unfortunately, this code apparently wasn't prepared to handle reuse!
Fixes GPU hangs in Dolphin on Broadwell.
Huge thanks to Pierre Bourdon and Ilia Mirkin for debugging this
and helping track down the real issue.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92623
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Pierre Bourdon <delroth@gmail.com>
(cherry picked from commit bf05af3f0e)
Previously we could create a renderbuffer with format
MESA_FORMAT_R8G8B8A8_UNORM, convert that renderbuffer to an EGLImage,
then FAIL to convert the EGLImage back to a renderbuffer because
reasons. Just use the same check in
intel_image_target_renderbuffer_storage that brw_render_target_supported
uses.
There are more checks in brw_render_target_supported, but I don't think
they are necessary here. A different approach would be to refactor
brw_render_target_supported to take rb->Format and rb->NumSamples as
parameters (instead of a gl_renderbuffer) and use the new function here.
Fixes:
ES2-CTS.gtf.GL2ExtensionTests.egl_image.egl_image
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92476
Cc: "10.3 10.4 10.5 10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7070c8879a)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 98546bfd03)
v2 (agd): rebase on mesa master, split pci ids to
separate commit
v3 (agd): use carrizo for llvm processor name for
llvm 3.7 and older
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit bf0d0ce0d5)
The edgeflag comes in as ubyte with glEdgeFlagPointer but as float with
plain immediate glEdgeFlag. Avoid reading bytes that weren't meant for
the edgeflag in the pointer case.
Fixes intermittent failures with gl-2.0-edgeflag piglit (and valgrind
complaints about reading uninitialized memory).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e05021ff72)
f16c intrinsic can only be emitted when AVX is used. So when we disable AVX
due to forcing 128bit vectors we must not use this intrinsic (depending on
llvm version, this worked previously because llvm used AVX even when we didn't
tell it to, however I've seen this fail with llvm 3.3 since
718249843b which seems to have the side effect
of disabling avx in llvm albeit it only touches sse flags really, but
with ea421e919a it's now really disabled).
Albeit being able to use AVX with 128bit vectors also would have its uses, the
code as is really was meant to emulate jit code creation for less capable cpus.
v2: add some (ifdefed out) missing de-featuring options for simulating
less capable cpus.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 711489648b)
Nominated-by: Roland Scheidegger <sroland@vmware.com>
The section for UVD 2 and older was not updated
when HEVC support was added. Reported by Kano
on irc.
v2: integrate the UVD2 and older checks into the
main switch statement.
v3: handle encode checking as well. Encode is
already checked in the top case statement, so
drop encode checks in the lower case statement.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 7b63658125)
This should prevent disparity between features Mesa and LLVM
believe are supported by the CPU.
http://lists.freedesktop.org/archives/mesa-dev/2015-October/thread.html#96990
Tested on a i7-3720QM w/ LLVM 3.3 and 3.6.
v2: Increase SmallVector initial size as suggested by Gustaw Smolarczyk.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 718249843b)
The refactoring commit, c6bf1cd, accidentally reverted cd49b97
and 99b1f47. These changes caused more code to be added to the
function and removed the existing support for ASTC. This patch
reverts those modifications.
v2. Actually include ASTC support again.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92221
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f1147a238a)
[Emil Velikov]
- Drop the KHR_texture_compression_astc_ldr check
- Add texcompress.h include.
Signed-off-by: Emil Velikov <emil.velikov@collabora.co.uk>
The commit base varies greatly between master and 11.0. It seems that
the commit (in it's current form) is not applicable for the branch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.co.uk>
GNU make predefines RM to rm -f but this is not required by POSIX
so ensure that RM is set. This fixes "make clean" on OpenBSD.
v2: use AC_CHECK_PROG
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 99c4079c37)
Patch also refactors name length queries which were using array size
in computation, this has to be done in same time to avoid regression in
arb_program_interface_query-resource-query Piglit test.
Fixes rest of the failures with
ES31-CTS.program_interface_query.no-locations
v2: make additional check only for GS inputs
v3: create helper function for resource name length
so that it gets calculated only in one place
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
(cherry picked from commit c0722be9f5)
intel_update_winsys_renderbuffer_miptree() will release the existing
miptree when wrapping a new DRI2 buffer, so we can remove the early
release and so prevent a NULL mt dereference should importing the new
DRI2 name fail for any reason. (Reusing the old DRI2 name will result
in the rendering going astray, to a stale buffer, and not shown on the
screen, but it allows us to issue a warning and not crash much later in
innocent code.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86281
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit 70e91d61fd)
The src_reg constructor that received the glsl_type was using it
only to build the swizzle, but not to fill this->type as dst_reg
is doing.
This caused some type mismatch between movs and alu operations
on the NIR path, so copy propagation optimization was not applied
to remove unneeded movs if negate modifier was involved. This was
first detected on minus (negate+add) operations.
Shader DB results (taking into account only vec4):
total instructions in shared programs: 20019 -> 19934 (-0.42%)
instructions in affected programs: 2918 -> 2833 (-2.91%)
helped: 79
HURT: 0
GAINED: 0
LOST: 0
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 4de86e1371)
Nominated-by: Christoph Brill <egore911@egore911.de>
opt_register_coalesce stopped to check previous instructions to
coalesce with if somebody else was writing on the same
destination. This can be optimized to check if somebody else was
writing to the same channels of the same destination using the
writemask.
Shader DB results (taking into account only vec4):
total instructions in shared programs: 1781593 -> 1734957 (-2.62%)
instructions in affected programs: 1238390 -> 1191754 (-3.77%)
helped: 12782
HURT: 0
GAINED: 0
LOST: 0
v2: removed some parenthesis, fixed indentation, as suggested by
Matt Turner
v3: added brackets, for consistency, as suggested by Eduardo Lima
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit d4e29af234)
Nominated-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes assertion failure with new piglit
arb_draw_buffers_blend-state_set_get test.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit e24d04e436)
This avoids a serious r600g bug leading to a GPU hang.
The chances this bug will get fixed are pretty low now.
I deeply regret listening to others and not pushing this patch, leaving
other users with a GPU-crashing driver. Yes, it should be fixed
in the compiler and it's ugly, but users couldn't care less about that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86720
Cc: 11.0 10.6 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 814f31457e)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 867284a8f0)
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 381c17d695)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit aa060e276c)
[Emil Velikov: si_shader_destroy() wants the ctx as first argument]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/radeonsi/si_shader.c
Otherwise there are problems when user overrides version and application
such as Piglit wants to detect used api with glGetString(GL_VERSION).
This makes it currently impossible to run glslparsertest tests for
OpenGL ES when using version override.
Below is example when using MESA_GLES_VERSION_OVERRIDE=3.1.
Before:
"3.1 Mesa 11.1.0-devel (git-24a1a15)"
After:
"OpenGL ES 3.1 Mesa 11.1.0-devel (git-78042ff)"
v2: only include api prefix for OpenGL ES (Boyan Ding)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dc8c221e28)
Otherwise the mem2gmem blit would see potentially bogus texture
coordinates. Fixes an issue that shows up with glamor.
CC: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 6206da736c)
It fixes a building error of the android 6.0 64-bit target.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 7599f8b167)
Note Android version before Lollipop is not supported.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d31005e3e5)
pipe_surface_reference have problems with deleted contexts,
so use of pipe_surface_release might be more appropriate.
Fixes Wasteland 2 Director's Cut crash on start.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 14f7ce4248)
The variable 'i' is a value in [0, MAT_ATTRIB_MAX-1] so subtracting
VERT_ATTRIB_GENERIC0 gave a bogus value and we executed the default
switch clause for all loop iterations.
This doesn't fix any known issues but was clearly incorrect.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit dd293d8aae)
Fixes:
ES3-CTS.shaders.negative.constant_sequence
spec/glsl-es-3.00/compiler/global-initializer/from-sequence.vert
spec/glsl-es-3.00/compiler/global-initializer/from-sequence.frag
v2: Fix a couple copy-and-paste mistake in the spec quotations.
Suggested by Matt.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 92635a84a7)
This will be used in the next patch to enforce some language sematics.
v2: Fix inverted logic in
ast_function_expression::has_sequence_subexpression. The method
originally had a different name and a different meaning. I fixed the
logic in ast_to_hir.cpp, but I only changed the names in
ast_function.cpp.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 05e4601c6b)
v2: Combine this check with the existing const and uniform checks. This
change depends on the previous patch (glsl: Only set
ir_variable::constant_value for const-decorated variables).
Fixes:
ES2-CTS.shaders.negative.initialize
ES3-CTS.shaders.negative.initialize
spec/glsl-es-1.00/compiler/global-initializer/from-attribute.vert
spec/glsl-es-1.00/compiler/global-initializer/from-uniform.vert
spec/glsl-es-1.00/compiler/global-initializer/from-uniform.frag
spec/glsl-es-1.00/compiler/global-initializer/from-global.vert
spec/glsl-es-1.00/compiler/global-initializer/from-global.frag
spec/glsl-es-1.00/compiler/global-initializer/from-varying.frag
spec/glsl-es-3.00/compiler/global-initializer/from-uniform.vert
spec/glsl-es-3.00/compiler/global-initializer/from-uniform.frag
spec/glsl-es-3.00/compiler/global-initializer/from-in.vert
spec/glsl-es-3.00/compiler/global-initializer/from-in.frag
spec/glsl-es-3.00/compiler/global-initializer/from-global.vert
spec/glsl-es-3.00/compiler/global-initializer/from-global.frag
Note: spec/glsl-es-3.00/compiler/global-initializer/from-sequence.*
still fail because the result of a sequence operator is still considered
to be a constant expression.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92304
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> [v1]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bb329f2ff6)
Right now we're also setting for uniforms, and that doesn't seem to hurt
things. The next patch will make general global variables in GLSL ES,
and those definitely should not have constant_value set!
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3524d6df33)
This even matches the comment "uniform initializers are precious, and
could get used by another stage."
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5bc68f0f2b)
This is the way layout(binding=xxx) works from GLSL. The old method
just happened to work (and significantly predated support for
layout(binding=xxx)), but future changes will break this.
v2: Remove some stale comments. Suggested by Matt and Chris Forbes.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8acce5d53a)
In d4a24745 (August 2012), Paul made functions calls not be constant
expressions in GLSL ES 1.00. Since this feature was added in desktop
GLSL 1.20, we believed that it was added in GLSL ES 3.00. That turns
out to be completely wrong. Built-in functions have always been allowed
as constant expressions in GLSL ES, and the patch adds the (many) spec
quotations to prove it.
While we never previously encountered this, a later patch enforces a GLSL
ES 1.00 rule that global variable initializers must be constant
expressions. Without this fix, several dEQP tests fail.
Fixes:
tests/spec/glsl-es-1.00/compiler/const-initializer/from-function.frag
tests/spec/glsl-es-1.00/compiler/const-initializer/from-function.vert
tests/spec/glsl-es-1.00/compiler/const-initializer/from-sequence-in-function.frag
tests/spec/glsl-es-1.00/compiler/const-initializer/from-sequence-in-function.vert
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.0 10.1 10.2 10.3 10.4 10.5 10.6 11.0" <mesa-stable@lists.freedesktop.org>
Yes, I know we don't maintain stable branches that far back, but that
*is* how far back this bug goes!
(cherry picked from commit 43b07eb60f)
