The SVGA_NEW_FS flag is needed since we now examine the fragment
shader's fs_shadow_compare_units flags. The SVGA_NEW_TEXTURE_FLAGS
flag is not needed since it's only for pre-VGPU10.
No piglit changes. This doesn't fix any known issues but it could
pop up somewhere. Suggested by Charmaine.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This should fix:
dEQP-VK.pipeline.sampler.view_type.*.format.b4g4r4a4_unorm_pack16.address_modes.all_mode_clamp_to_border_opaque_black
and a few others in that area.
Fixes: b11c4a5546 (radv: add texture descriptor/fmask/cmask support for GFX9)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
amdvlk is probably more subtle than this but it never uses
the inv cb/db variants, we fail some CTS tests without this.
Fixes:
dEQP-VK.renderpass.dedicated_allocation.formats.d32_sfloat_s8_uint.input*.
Fixes: c2fbeb7ca0 (radv: add GFX9 cache flushing support.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (for now :-)
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports a fix from amdvlk, to fix the sizing for mip levels
when block compressed images are viewed using uncompressed views.
Fixes:
dEQP-VK.image.texel_view_compatible.graphic.extended*bc*
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Previously, we were flagging the instruction state buffer for capture
but not surface state or dynamic state. We want those captured too.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Some older versions of the Vulkan driver didn't properly tag dynamic
state as needing to be captured. Also, this prevents crashes when
looking at dumps on older kernels.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We were walking the sections, printing the batches, and then freeing
them in one pass. If the batch happens to reference any earlier
sections (which it almost certainly will since it's at the end), we will
access freed memory.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This can happen when there's no active fragment shader, such as
when using transform feedback. This wasn't hit by any Piglit test
but is hit by Daniel Rákos' Nature demo. VMware bug 2026189.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Change 59f458cd87 added more enums to glsl_base_type. We
have to bump up the size of the bitfields for fields of this type
for MSVC. Also, add another assertion to catch another place where
this enum bitfield is used.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
It's legal to a pipeline stat query on a compute queue,
but we'd emit the wrong packet here. This should fix it to emit
the correct packet.
Noticed while inspecting the mpv hang.
Fixes: ad61eac250 (radv: factor out eop event writing code. (v2))
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The event emission wasn't sending the correct packet for gfx8 compute
queues, which explains why it works on vega fine.
This fixes the mpv vulkan hang.
Fixes: ad61eac250 (radv: factor out eop event writing code. (v2))
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These seem mildly unstable on vega, crashing CTS in various fun ways,
and looks like leaking memory.
Disable for now, but leave the option to enable them.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We destroy the pools but don't free the container.
This fixes:
dEQP-VK.wsi.xlib.swapchain.simulate_oom*
Fixes: d50937f137 (vulkan/wsi: Implement prime in a completely generic way)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Framebuffer is from 0,0, not (dst.x, dst.y).
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
The position start at (dst.x, dst.y), so if we want the source to
start at (src.x, src.y), we have to offset by (src.x-dst.x,src.y-dst.y).
Haven't tested that this fixed anything yet, but found by inspection.
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
the samples_identical instruction returns 0 if they are differet, so
we have to do the extra work if the result is 0, not if it is != 0.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Brendan King <Brendan.King@imgtec.com>
My refactor in 47273d7312 missed this early return; because
of it, setting UseFallback one layer above actually prevented the
software path from being used.
Remove this early return and let each platform's dri2_initialize_*()
decide what it can do with the LIBGL_ALWAYS_SOFTWARE restriction.
platform_{surfaceless,x11,wayland} were already handling it themselves.
Fixes: 47273d7312 "egl: set UseFallback if LIBGL_ALWAYS_SOFTWARE is set"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Brendan King <Brendan.King@imgtec.com>
Note: the following happens only when using slibtool.
Since this is a very serious breakage, we will keep the workaround until
a better solution is available.
DRI modules store the address of the dispatch table in a TLS variable,
_glapi_tls_Dispatch.
Changes to the way libEGL is built in d884d8d007 resulted in
it being statically linked against libglapi, and thus containing its own
copy of _glapi_tls_Dispatch. The result was that some applications would
fail to work (e.g. deqp-egl, which dynamically loads libEGL), due to the
DRI module storing the dispatch table address in one copy of
_glapi_tls_Dispatch, and libEGL obtaining the address from another copy
of the variable.
Fixes: d884d8d007 "egl/dri: link directly to libglapi.so"
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For copies the texture unit needs to know the depth format so
it can read the htile data properly.
This fixes:
dEQP-VK.renderpass.suballocation.formats.d32_sfloat_s8_uint.load.clear
Fixes: ad3d98da9f (radv: enable tc compatible htile for d32s8 also.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This needs to correspond to the bit depth of the Z plane.
noticed in passing reading amdvlk.
Fixes: fc6c77e162 (radv: fix TC-compat HTILE with VK_FORMAT_D32_SFLOAT_S8_UINT on Vega)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes a crash since the variant object isn't allocated until later
in the function. Not sure how this got through.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
... to set_vs_specific_input_locs().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The idea is to clean up the add arguments logic.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
... to declare_global_input_sgprs().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
... to declare_vs_specific_inputs_sgprs().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's a no-op anyway but it looked strange to me, remove it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
