There are some corner cases where you end up with an esgs ring, but no
gsvs ring, test for both before dereferencing.
Fixes:
dEQP-VK.geometry.emit.points_emit_0_end_0
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes:
dEQP-VK.geometry.layered.1d_array.fragment_layer
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the compiled geometry shader and other state registers.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the scratch infrastructure to handle the esgs
and gsvs rings.
(this replaces the old code that did this with patching).
v2: fix correct ring sizes, reset sizes (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds gs copy shader support to the pipeline cache, and few
geometry related changes.
v2: rebase for spill changes.
v2.1: fix incorrect pipeline destruction.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the shader to the ES block in the correct case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enables the paths for setting up user ptrs to vs/es and gs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to later allow ES shaders to be emitted.
Review-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes up a few of the commented out blocks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prevent Coverity seeing potential errors when src is
no initialized in the switch case.
Coverity-Id: 1396397
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Previously the z offset of the destination image was being ignored. It
should be taken into account when copying into a 3d target.
Also, img_extent_el.depth was being incorrectly clamped to 1 due to the
source image being VK_IMAGE_TYPE_2D. This would result in the blit
failing to iterate over all the 3d slices. Instead we clamp to the
destination image type.
Fixes failures in CTS tests:
dEQP-VK.api.copy_and_blit.image_to_image.3d_images.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
We really use the depth block for the blits.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
There is a new error code in Maintenance1 that is more specific to the
situation: VK_ERROR_OUT_OF_POOL_MEMORY_KHR
Fixes CTS test case:
dEQP-VK.api.descriptor_pool.out_of_pool_memory
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is part of the spec and fixes CTS tests:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This extension was not correctly supported, and it conflicts with the
VK_KHR_MAINTENANCE1 spec.
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this fixes deferred shadows with geom shaders enabled.
but I think this fix is fine by itself.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These files belong to the vulkan loader.
Identical to
045f38a507 vulkan: Don't install vk_platform.h or vulkan.h.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2(Bas): Remove the extra VK_ERROR_FRAGMENTED_POOL cases.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Along the lines of what
3b804819 anv: Default PointSize to 1.0 if not written by the shader
does for anv, program a default point size in the hw of 1.0.
This preempt fixes a bunch of geom shader tests.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In situations where libdrm_amdgpu and mesa are installed to the same
location, the mesa installed headers will take precedence over the git
source headers.
This is due to the AMDGPU_CFLAGS containing the install directory.
This situation can cause build errors if the git version of a header is
newer than the currently installed version of a header (e.g. git pull
updates vulkan.h)
Note: using the same install prefix for mesa and libdrm is probably a
common occurrence since it is described in the radeonBuildHowTo wiki:
https://www.x.org/wiki/radeonBuildHowTo/
v2: added sign-off
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This fixes some issues we'd hit later if using viewport
indexes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just always use the layer clear pipelines,
the overhead of emitting the layer shouldn't be
too large.
v2: Bas suggested we always use it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the infrastructure to allow writing layer
and viewport index. It's just a first patch out of the geom
shader tree, and doesn't do much on its own.
v2: add missing if statement change (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just prep work for layered clears, it doesn't change
anything.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pretty straightforward. Also deleted the big comment block as it
is a pretty standard pattern for filling in arrays.
Also removed the error message on non-existent devices, as getting
7 errors printed to the console each time you enumerate the
devices is pretty confusing.
v2: Add constant for number of DRM devices.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We only need one per samples (maybe not even that), reduce
all the unneeded ones.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Each physical device may have different extensions than one another.
Furthermore, depending on the software stack, some extensions may not be
accessible.
If an extension is conditional, it can be registered only when
necessary.
v2: removed unused function and fixed indentation
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All extension arrays are global, but only one of them refers to instance
extensions.
The device extension array refers to extensions that are common across
all physical devices. This disctinction will be more imporant once we
have dynamic extension support for devices.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Queues are independent execution streams. The vulkan spec provides no
ordering guarantees for different queues.
By using a single context for all queues, we are forcing all commands
into an unecessary FIFO ordering.
This change is a preparation step to allow our-of-ordering scheduling of
certain work tasks.
v2: Fix a rebase error with radv_QueueSubmit() and trace_bo
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Port of 1e41d7f7b0:
"anv: Support loader interface version 3 (patch v2)"
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
These seem unlikely to be used.
Also remove irrelevant comment about SKL.
v2: forgot to rebase on master
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
