We want the clamping of the coordinate to apply after the offset, so we
need to do math to lower the offset out of the instruction. Fixes texwrap
offset cases for GL_CLAMP with GL_NEAREST on vc5.
Note: I moved the get_texture_size() verbatim, so that it was defined
before use.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The spec says the missing texel (when we wrap around both x and y axis)
should be synthesized as the average of the 3 other texels. For bilinear
filtering however we instead adjusted the filter weights (because, while
the complexity looks similar, there would be 4 times as many color values
to fix up than weights). Obviously this could not work for gather (hence
accurate corner filtering was disabled with gather).
Implement this by just doing it as the spec implies - calculate the 4th
texel as the average of the other 3. With gather of course there's only
one color to worry about, so it's not all that many instructions neither
(albeit surely the whole cube map filtering is hilariously complex).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Cube texture wrapping is a bit special since the values (post face
projection) always are within [0,1], so we took advantage of that and
omitted some clamps.
However, we can still get NaNs (either because the coords already had NaNs,
or the face projection generated them), and in fact we didn't handle them
quite safely. I've seen -INT_MAX + 1 been propagated through as the final int
coord value, albeit I didn't observe a crash. (Not quite a coincidence, since
any stride mul with -INT_MAX or -INT_MAX+1 will turn up as a small positive
number - nevertheless, I'd rather not try my luck, I'm not entirely sure it
can't really turn up negative neither due to seamless coord swapping, plus
ifloor of a NaN is not guaranteed to return -INT_MAX by any standard. And
we kill off NaNs similarly with ordinary texture wrapping too.)
So kill off the NaNs by using the common max against zero method.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Unfortunately, in aubinator and aubinator_error_decode we don't always
know how many of a given state we have, so we must guess. One day,
we'll come up with a way to annotate the batch to solve this problem.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The shared framework can now do everything that aubinator_error_decode
ever did and more. It's time to make the switch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Previously, if a group was nested in another group such that it didn't
start on a dword boundary, we would decode it as if it started at the
start of its first dword. This changes things to work even more in
terms of bits so that we can properly decode these structs. This
affects MOCS, attribute swizzles, and several other things.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
And move the comment to amd/common.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use 16_ABGR instead of 32_ABGR if Z isn't written.
Ported from RadeonSI.
No CTS regressions on Polaris.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
ac_shader_util.c will contain shader helpers for RadeonSI
and RADV.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We should also not load the input SGPRs and VGPRS, but
let's start with this for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use a boolean instead because the number of needed SGPRs
is always 3.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of grid components is always 3 when gl_NumWorkGroups
is declared, because it relies on the number of components of
nir_instrinsic_load_num_work_groups.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From android cts 8.0_r4, a new test case checks if all the required egl
extensions are exposed. In the current implementation we expose KHR_image
if KHR_image_base and KHR_image_pixmap are supported but KHR_image spec
does not mandate the existence of both the extensions.
This patch preserves the current check and also provides the backend
with an option to expose the KHR_image extension.
Test: run cts -m CtsOpenGLTestCases -t \
android.opengl.cts.OpenGlEsVersionTest#testRequiredEglExtensions
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We never supported it. Missed during copy and pasting.
Fixes: 17201a2eb0 "radv: port to using updated anv entrypoint/extension generator."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The hardware doesn't support this, and isl_surf_get_mcs_surf will fail.
I feel a bit bad replicating this logic, but we want to decide up front.
This fixes the following test when run with --deqp-surface-width=16384:
- GTF-GL46.gtf30.GL3Tests.framebuffer_blit.framebuffer_blit_error_blitframebuffer_multisampled_framebuffers_different_sample_count
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Commit bb1e6ff161 ("spirv: Add a prepass to set types on vtn_values")
added generation of vtn_gather_types.c, but forgot to add it to the
Android build files.
Fixes: bb1e6ff161 ("spirv: Add a prepass to set types on vtn_values")
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There is no API available to properly query the IMPLEMENTATION_DEFINED
format. As a workaround we rely here on gralloc allocating either
an arbitrary YCbCr 4:2:0 or RGBX_8888, with the latter being recognized
by lock_ycbcr failing.
Reviewed-on: https://chromium-review.googlesource.com/566793
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This patch fixes piglit tex3d-maxsize by correcting 4 things:
The total_size calculation was using 32-bit math, therefore a >4GB
allocation request overflowed and was not returning false (unsupported).
Changed AlignedMalloc arguments from "unsigned int" to size_t, to handle
>4GB allocations.
Added error checking on texture allocations to fail gracefully.
Finally, temporarily decreased supported max texture size from 4GB to 2GB.
The gallivm texture-sampler needs some additional work to correctly handle
larger than 2GB textures (offsets to LLVMBuildGEP are signed).
I'm working on a follow-on patch to allow up to 4GB textures, as this is
useful in HPC visualization applications.
Fixes piglit tex3d-maxsize.
v2: Updated patch description to clarify ">4GB".
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
Environment variable KNOB_MAX_WORKER_THREADS allows the user to override
default thread creation and thread binding. Previous commit to adjust
linux cpu topology caused setting this KNOB to bind all threads to a single
core.
This patch restores correct functionality of override.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
This test should rely on dispatch.h being generated, but it doesn't.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The sample mask is used even if msaa is not explicity enabled when we
have a framebuffer with multisampled surfaces. That's DX behavior and
what the Radeon drivers do. Not sure about other drivers at this point.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
