This corresponding piglit tests supported this incorrect behavior instead of
pointing at it.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 10.0 9.2 9.1 <mesa-stable@lists.freedesktop.org>
This adds 2 optimizations for radeonsi:
- handling of DISCARD_RANGE
- mapping an uninitialized buffer range is automatically UNSYNCHRONIZED
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christoph Brill <egore911@gmail.com>
v2: Renamed r600_buffer.c to r600_buffer_common.c. The stupid build system
doesn't allow 2 files of the same name in different directories.
If we assume that all buffers allocated by the DDX are scanout, a new flag
that says "this is not scanout" has to be added to support the non-scanout
buffers and maintain backward compatibility.
This fixes bad rendering on Wayland.
The flag is defined as:
#define RADEON_TILING_R600_NO_SCANOUT RADEON_TILING_SWAP_16BIT
AFAIK, RADEON_TILING_SWAP_16BIT is not used on SI.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Patch copies the whole data structure at once instead of
assigning individual variables.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch moves following bitfields and variables to the data
structure:
explicit_location, explicit_index, explicit_binding, has_initializer,
is_unmatched_generic_inout, location_frac, from_named_ifc_block_nonarray,
from_named_ifc_block_array, depth_layout, location, index, binding,
max_array_access, atomic
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch moves following bitfields in to the data structure:
used, assigned, how_declared, mode, interpolation,
origin_upper_left, pixel_center_integer
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Data section helps serialization and cloning of a ir_variable. This
patch includes the helper bits used for read only ir_variables.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Newer virtual HW versions support smooth/stipple/wide lines.
Use that instead of 'draw' fallbacks when possible.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
With this patch llvmpipe will adhere to the ARB_depth_clamp enabled state when
clamping the fragment's zw value. To support this, the variant key now includes
the depth_clamp state. key->depth_clamp is derived from pipe_rasterizer_state's
(depth_clip == 0), thus depth clamp is only enabled when depth clip is disabled.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
On evergreen we have to reserve 1 stack element in some additional cases
besides the ones mentioned in the docs, but stack size computation was
recently reimplemented exactly as described in the docs by the patch that
added workarounds for stack issues on EG/CM, resulting in regressions
with some apps (Serious Sam 3).
This patch fixes it by restoring previous behavior.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=72369
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Disabled by default, but it's very useful when needed.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Caching in the vbuf module meant that once a vertex has been
emitted it was cached, but it's possible for a vertex at the
same location to be emitted again, but this time with a different
front-face semantic. Caching was causing the first version of the
vertex to be emitted, which resulted in the renderer getting
incorrect front-face attributes. By reseting the vertex_id (which
is used for caching) we make sure that once a front-face info
has been injected the vertex will endup getting emitted.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The fact that we flush denorms to zero breaks our half-float
conversion and blending. This patches enables denorms for
blending. It's a little tricky due to the llvm bug that makes
it incorrectly reorder the mxcsr intrinsics:
http://llvm.org/bugs/show_bug.cgi?id=6393
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
This needs a prime-aware vmwgfx kernel module to work properly.
(With additions by Christopher James Halse Rogers <raof@ubuntu.com>)
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
v2: Fix transliteration of lseek arguments
Ignore busy return from RADEON_GEM_BUSY ioctl; we're only after the domain
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
It's a map of GEM name->bo, so identify it as such
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
v2: Fix up queryImage return for ATTRIB_FD
Use driver_descriptor.configuration to determine whether the driver
supports DMA-BUF import/export.
v3: Really, truly, fix up queryImage return for ATTRIB_FD
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Otherwise the default is TYPE_SHARED, which will flink the bo. This seems
rather unnecessary for a simple stride query.
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
v2: Pick out the correct gl_context pointer
v3: Don't leak pipe_resources on error path
Set img->dri_format correctly
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
First off, nv50_program only has 16 in/out varyings. However reporting
16 makes 'm' become 68 in nv50_fp_linkage_validate with the
varying-packing-simple piglit test. (Subverting the assert makes it
compile but fail.) With this patch, varying-packing-simple passes.
See: https://bugs.freedesktop.org/show_bug.cgi?id=69155
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "9.2 10.0" <mesa-stable@lists.freedesktop.org>
To help the transition period when DRI loaders are being updated
to support the newer __driDriverExtensions_foo mechanism,
we populate __driDriverExtensions with the extensions returned
by __driDriverExtensions_foo during a library contructor
function.
We find the driver foo's name by using the dladdr function
which gives the path of the dynamic library's name that
was being loaded.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
The _EGLSurface struct which is embedded into dri2_egl_surface also contains a
swap interval member so the other member is redundant. Nothing was using it as
far as I can tell.
On Gen4+, OUT_RELOC_FENCED is equivalent to OUT_RELOC; libdrm silently
ignores the fenced flag:
/* We never use HW fences for rendering on 965+ */
if (bufmgr_gem->gen >= 4)
need_fence = false;
Thanks to Eric for noticing this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that loop_controls no longer creates normatively bound loops,
there is no need for ir_loop::normative_bound or the
lower_bounded_loops pass.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
