v2: add comment in code
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100741
Fixes: a5e733c6b5 mesa: drop current draw/read buffer when ctx is released
Reviewed-by: Rob Clark <robdclark@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit fd6c2a3f3e)
[Emil Velikov: s/CurrentClientDispatch/CurrentDispatch/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/main/context.c
Rather than misleadingly depending on DRI2 for the WL_DRM vs WL_SHM
formats, use the wl_drm and wl_shm interface respectively.
Fixes: a1727aa75e ("egl/wayland: Don't use DRM format codes for SHM")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 6ef0fc400c)
Analogous to previous commit - the compiler can discard xcb + wayland
libs, since there is no user (the static libraries) before it on the
command line.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
(cherry picked from commit 2b6ad89d86)
The compiler can discard the shared ones from the link chain, since
there is no user (the static libraries) before it on the command line.
Cc: mesa-stable@lists.freedesktop.org
Reported-by: Laurent Carlier <lordheavym@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
(cherry picked from commit 3e8790bff0)
The width and height of the copy don't have to be aligned to the block
size if they specify the right or bottom edges of the image. (See also
the comment and asserts right above). We need to round them up when we
do the division in order to get it 100% right.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0901d0bc4c)
We've discovered in the Vulkan driver that simply doing the end-of-pipe
sync afterwards is insufficient. The specific requirement stated in the
PRM is that you have to do one every time you transition between the
tree modes of "clear", "render", and "resolve". This is GL, so we could
track it but any attempt to do so would most likely get it wrong. For
now, it's easier to just assume that every fast-clear op is an island
and do the sync both before and after.
This also removes the unneeded flush and stall after slow-clear
operations.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 441cd7a81d)
Commit 9ca6711faa changed the Wayland winsys to only block for the
frame callback inside SwapBuffers, rather than get_back_bo. get_back_bo
would perform a single non-blocking Wayland event dispatch, to try to
find any release events which we had pulled off the wire but not
actually processed. The blocking dispatch was moved to SwapBuffers.
This removed a guarantee that we would've processed all events inside
get_back_bo(), and introduced a failure whereby the server could've sent
a buffer release event, but we wouldn't have read it. In clients
unconstrained by SwapInterval (rendering ~as fast as possible), which
were being displayed directly without composition (buffer release delayed),
this could lead to get_back_bo() failing because there were no free
buffers available to it.
The drawing rightly failed, but this was papered over because of the
path in eglSwapBuffers() which attempts to guarantee a BO, in order to
support calling SwapBuffers twice in a row with no rendering actually
having been performed.
Since eglSwapBuffers will perform a blocking dispatch of Wayland
events, a buffer release would have arrived by that point, and we
could then choose a buffer to post to the server. The effect was that
frames were displayed out-of-order, since we grabbed a frame with random
past content to display to the compositor.
Ideally get_back_bo() failing should store a failure flag inside the
surface and cause the next SwapBuffers to fail, but for the meantime,
restore the correct behaviour such that get_back_bo() no longer fails.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98833
Fixes: 9ca6711faa ("Revert "wayland: Block for the frame callback in get_back_bo not dri2_swap_buffers"")
(cherry picked from commit 1f2d0093bf)
During display initialisation, we need a separate event queue to handle
the registry events, which is correctly handled. But we also need
separate per-surface event queues to handle swapchain-related events,
such as surface frame events and buffer release events. This avoids two
surfaces from the same EGLDisplay, both current on separate threads,
dispatching each other's events.
Create separate per-surface event queues, create wl_surface and wl_drm
proxy wrapper objects per surface, so we eliminate the race around
sending events to the wrong queue. swrast buffers do not need a
dedicated proxy wrapper, as the wl_shm_pool used to create the
wl_buffers, being transient, can itself be assigned to a queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 36b9976e1f ("egl/wayland: Avoid race conditions when on non-main thread")
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 03dd9a88b0)
Squashed with:
egl/wayland: verify event queue was allocated
We're already verified that 'window' wasn't NULL, I'm guessing this
allocation error is about the newly created queue.
CID: 1409754
Fixes: 03dd9a88b0 ("egl/wayland: Use per-surface event queues")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 30dc56bb5b)
wl_display_roundtrip_queue() exists and can replace roundtrip(). The
API was introduced with wayland 1.6, while we currently require 1.11.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8118bc269f)
Though most swapchain operations used a queue, they were racy in that
the object was created with the queue only set later, meaning that its
event could potentially be dispatched from the default queue in between
these two steps.
Use proxy wrappers to avoid this race, also assigning wl_buffers created
for the swapchain to the event queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 5034c61558)
[Emil Velikov: wsi_wl_swapchain is missing surface_version, move image_count]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/vulkan/wsi/wsi_common_wayland.c
Squahed with:
vulkan/wsi/wayland: Fix proxy wrappers for swapchain recreation
Before the swapchain event queue is destroyed, all proxy objects that reference
it must be dropped. Otherwise we risk a use-after-free if a frame callback event
or buffer release events are received afterwards.
This happens when an application destroys and recreates a swapchain in FIFO
mode between two frames without using the VkSwapchainCreateInfoKHR::oldSwapchain
mechanism to keep the old swapchain until after the next redraw.
Fixes: 5034c61558 ("vulkan/wsi/wayland: Use proxy wrappers for swapchain")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1586768e74)
[Emil Velikov: image_count is not in base]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/vulkan/wsi/wsi_common_wayland.c
Calling random callbacks on the display's event queue is hostile, as
we may call into client code when it least expects it. Create our own
event queue, one per wsi_wl_display, and use that for the registry.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit c902a1957d)
There's no need to call wl_display_roundtrip() after trying to create a
buffer through wl_drm; if it succeeds then everything is fine, and if it
fails, then we get a fatal protocol error so can't recover anyway.
Additionally, doing a roundtrip on the default / main application queue,
is destructive anyway, so would need to be its own queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit afe8c8a299)
Untangle the exit cleanup paths so we don't try to use the registry
variable before it's been initialised.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d9a8bba7f4)
The instruction encodings only allow for immediates. Don't try to
replace a zero (which is dumb to have in that op in any case) with RZ.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 82e77d4e44)
It's been like this since the code was introduced.
Fixes: 86eb4131a9 (st/va: add headless support, i.e. VA_DISPLAY_DRM)
Cc: <mesa-stable@lists.freedesktop.org>
Cc: Julien Isorce <julien.isorce@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit aaea53c2c0)
The procedure for decompressing an opaque DXT1 OpenGL format is
dependant on the comparison of two colors stored in the first 32 bits of
the compressed block. Here's the specified OpenGL behavior for
reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1.
This means that the behavior is incompatible with OpenGL. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque DXT1 OpenGL formats are specified to be
decoded in exactly the same way except the BLACK value must have a
transparent alpha channel in the latter. Use the four-channel BC1 Intel
formats with the alpha set to 1 to provide the behavior required by the
spec. Note that the alpha is already set to 1 for RGB formats in
brw_get_texture_swizzle().
v2: Provide a more detailed commit message (Kenneth Graunke).
v3: Ensure the alpha channel is set to 1 for DXT1 formats.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 688ddb85c8)
[Emil Velikov: attribute for BRW to ISL format rename]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_surface_formats.c
The procedure for decompressing an opaque BC1 Vulkan format is dependant on the
comparison of two colors stored in the first 32 bits of the compressed block.
Here's the specified OpenGL (and Vulkan) behavior for reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1. This
means that the behavior is incompatible with OpenGL and Vulkan. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque BC1 Vulkan formats are specified to be decoded in
exactly the same way except the BLACK value must have a transparent alpha
channel in the latter. Use the four-channel BC1 Intel formats with the alpha
set to 1 to provide the behavior required by the spec.
v2 (Kenneth Graunke):
- Provide a more detailed commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 56458cb168)
The datalayout for modules was purposely not being set in order to work around
the fact that the ExecutionEngine requires that the module's datalayout
matches the datalayout of the TargetMachine that the ExecutionEngine is
using.
When the pass manager runs on a module with no datalayout, it uses
the default datalayout which is little-endian. This causes problems
on big-endian targets, because some optimizations that are legal on
little-endian or illegal on big-endian.
To resolve this, we set the datalayout prior to running the pass
manager, and then clear it before creating the ExectionEngine.
This patch fixes a lot of piglit tests on big-endian ppc64.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 14e525a4d7)
Fixes regressions in Android CtsVerifier.apk on Intel Chrome OS devices
due to incorrect error handling in eglMakeCurrent. See below on how to
confirm the regression is fixed.
This partially reverts
commit 23c86c74cc
Author: Chad Versace <chadversary@chromium.org>
Subject: egl: Emit error when EGLSurface is lost
The problem with commit 23c86c74 is that, once an EGLSurface became
lost, the app could never unbind the bad surface. Each attempt to unbind
the bad surface with eglMakeCurrent failed with EGL_BAD_CURRENT_SURFACE.
Specificaly, the bad commit added the error handling below. #2 and #3
were right, but #1 was wrong.
1. eglMakeCurrent emits EGL_BAD_CURRENT_SURFACE if the calling
thread has unflushed commands and either previous surface is no
longer valid.
2. eglMakeCurrent emits EGL_BAD_NATIVE_WINDOW if either new surface
is no longer valid.
3. eglSwapBuffers emits EGL_BAD_NATIVE_WINDOW if the swapped surface
is no longer valid.
Whe I wrote the bad commit, I misunderstood the EGL spec language
for #1. The correct behavior is, if I understand correctly now, is
below. This patch doesn't implement the correct behavior, though, it
just reverts the broken behavior.
- Assume a bound EGLSurface is no longer valid.
- Assume the bound EGLContext has unflushed commands.
- The app calls eglMakeCurrent. The spec requires eglMakeCurrent to
implicitly flush. After flushing, eglMakeCurrent emits
EGL_BAD_CURRENT_SURFACE and does *not* alter the thread's
current bindings.
- If the app calls eglMakeCurrent again, and the app inserts no
commands into the GL command stream between the two eglMakeCurrent
calls, then this second eglMakeCurrent succeeds without emitting an
error.
How to confirm this fixes the regression:
Download android-cts-verifier-7.1_r5-linux_x86-x86.zip from
source.android.com, unpack, and `adb install CtsVerifier.apk`.
Run test "Projection Cube". Click the Pass button (a
green checkmark). Then run test "Projection Widget". Confirm that
widgets are visible and that logcat does not complain about
eglMakeCurrent failure.
Then confirm there are no regressions in the cts-traded module that
commit 263243b1 fixed:
cts-tf > run cts --skip-preconditions --skip-device-info \
-m CtsCameraTestCases \
-t android.hardware.camera2.cts.RobustnessTest
Tested with Chrome OS board "reef".
Fixes: 23c86c74 (egl: Emit error when EGLSurface is lost)
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 8f62d21bd7)
Reorder the uniforms to load first the dvec4-aligned variables in the
push constant buffer and then push the vec4-aligned ones. It takes
into account that the relocated uniforms should be aligned to their
channel size.
This fixes a bug were the dvec3/4 might be loaded one part on a GRF and
the rest in next GRF, so the region parameters to read that could break
the HW rules.
v2:
- Fix broken logic.
- Add a comment to explain what should be needed to optimise the usage
of the push constant buffer slots, as this patch does not pack the
uniforms.
v3:
- Implemented the push constant buffer usage optimization.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit e69e5c7006)
It was setting XYWZ swizzle and writemask to all uniforms, no matter if they
were a vector or scalar, so this can lead to problems when loading them
to the push constant buffer.
Moreover, 'shift' calculation was designed to calculate the offset in
DWORDS, but it doesn't take into account DFs, so the calculated swizzle
for the later ones was wrong.
The indirect case is not changed because MOV INDIRECT will write
to all components. Added an assert to verify that these uniforms
are aligned.
v2:
- Fix 'shift' calculation (Curro)
- Set both swizzle and writemask.
- Add assert(shift == 0) for the indirect case.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 8aa6ada838)
We are going to add a packing feature to reduce the usage of the push
constant buffer. One of the consequences is that 'nr_params' would be
modified by vec4_visitor's run call, so we need to restore it if one of
them failed before executing the fallback ones. Same thing happens to the
uniforms values that would be reordered afterwards.
Fixes GL45-CTS.arrays_of_arrays_gl.InteractionFunctionCalls2 when
the dvec4 alignment and packing patch is applied.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 354f7f2cb9)
If X11 did a software fallback to the entire screen, we would throw out
the BO the screen is scanning out from and allocate a new one.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e8ea42d245)
Together with some fixes to xdriinfo this fixes xdriinfo not working
with glvnd.
Since apps (xdriinfo) expect GetDriverConfig to work without going to
need through the dance to setup a glxcontext (which is a reasonable
expectation IMHO), the dispatch for this ends up significantly different
then any other dispatch function.
This patch gets the job done, but I'm not really happy with how this
patch turned out, suggestions for a better fix are welcome.
Cc: Kyle Brenneman <kbrenneman@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 84f764a759)
The reasoning Chad gave in the comment for choosing a valign of 4 is
entirely bunk. The fact that you have to multiply pitch by 2 is
completely unrelated to the halign/valign parameters used for texture
layout. (Not completely unrelated. W-tiling is just Y-tiling with a
bit of extra swizzling which turns 8x8 W-tiled chunks into 16x4 y-tiled
chunks so it makes everything easier if miplevels are always aligned to
8x8.) The fact that RENDER_SURFACE_STATE::SurfaceVerticalAlignmet
doesn't have a VALIGN_8 option doesn't matter since this is gen7 and you
can't do stencil texturing anyway.
v2 (Jason Ekstrand):
- Delete most of Chad's comment and add a more descriptive commit
message.
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
(cherry picked from commit 236f17a9f7)
PIPE_BUFFER is a target enum, not a binding. This caused the driver to
up-align the height of buffer resources, leading to largely oversizing
those resources. This is especially bad, as the buffer resources used
by the upload manager are already 1MB in size. Height alignment meant
that those would result in 4 to 8MB big BOs.
Fixes: c9e8b49b88 ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 8173d7d9e8)
vc4 was rejecting renderonly's import, because the offset field was
nonzero.
Fixes: 848b49b288 ("gallium: add renderonly library")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit c98f03c6eb)
This just adds the chip in the right places.
We don't set the partial_vs_wave workaround, as radeonsi
doesn't, but have to confirm it's not required.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a096d8d3f7)
[Andres Gomez: dropped code that didn't make it for 17.0]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/amd/vulkan/radv_device.c
Possibly other gen's have a similar limit. Fixes glmark2 -b shadow
with larger resolutions on devices with small gmem (for example,
fullscreen 1080p on 8x16/db410c).
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 6050d5bf3d)
LLVMDemangle, LLVMGlobalISel, and LLVMDebugInfoMSF are new.
Also update the comment to add irreader to the list of components.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chuck Atkins <chuck.atkins@kitware.com>
Signed-off-by: Ben Boeckel <ben.boeckel@kitware.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 58f51f0754)
The matrix used for YCbCr to RGB is listed in:
https://en.wikipedia.org/wiki/YCbCr
There was an error in converting the offsets from integers to unorm
values: 0.0625=16/256 should be 16.0/255,and 0.5=128.0/256 should be
128.0/255. With this fix, the CSC result is bit aligned with wikipedia's
conversion result and FFMPeg's result.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100854
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit a6fb943f3e)
This ensures that future calls to eglSwapBuffers and eglMakeCurrent emit
an error.
This patch is part of a series for fixing
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface
on Chrome OS x86 devices.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e5eace5868)
Squashed with commit:
egl/android: Set EGLSurface.Lost to EGL_TRUE/EGL_FALSE
Lost is an EGLBoolean, so we should assign it to EGL_TRUE/EGL_FALSE,
not true/false.
Fixes: e5eace5868 ("egl/android: Mark surface as lost when dequeueBuffer fails")
Fixes: 0212db3504 ("egl/android: Cancel any outstanding ANativeBuffer in surface destructor")
Reviewed-by: Chad Versace <chadversary@chromium.org>
(cherry picked from commit 63b12b0c77)
That is, call ANativeWindow::cancelBuffer in droid_destroy_surface().
This should prevent application deadlock when the app destroys the
EGLSurface after EGL has acquired a buffer from SurfaceFlinger
(ANativeWindow::dequeueBuffer) but before EGL has released it
(ANativeWindow::enqueueBuffer).
This patch is part of a series for fixing
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface
on Chrome OS x86 devices.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0212db3504)
Add a new bool, _EGLSurface::Lost, and check it in eglMakeCurrent and
eglSwapBuffers. The EGL 1.5 spec says that those functions emit errors
when the native surface is no longer valid.
This patch just updates core EGL. No driver sets _EGLSurface::Lost yet.
I discovered that Mesa failed to detect lost surfaces while debugging an
Android CTS camera test,
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface.
This patch doesn't fix the test though, though, because the test expects
EGL_BAD_SURFACE when the surface becomes lost, and this patch actually
complies with the EGL spec. If I interpreted the EGL spec correctly,
EGL_BAD_NATIVE_WINDOW or EGL_BAD_CURRENT_SURFACE is the correct error.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 23c86c74cc)
The code itself has nothing to do with shared glapi, thus having it
behind GLX_SHARED_GLAPI is misleading. Use GLX_INDIRECT_RENDERING
instead.
The latter macro is set at global scope by the Autotools and Scons build
systems.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 6177d60a37)
Analogous to previous commit. Check with the extensive commit
description and bug report referenced.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 51accecce7)
In the early days of Xorg and Mesa we had multiple providers of the
GLAPI. All of those were the ones responsible for dlopening the DRI
module. Hence it was perfectly fine, and actually expected, for the DRI
modules to have unresolved symbols.
Since then we've moved the API to a separate shared library and no other
libraries provide the symbols.
Here comes the picky part:
It's possible that one uses old Xorg (where libglx.so provides the
GLAPI) and new Mesa (with DRI modules linking against libglapi.so).
That should still work, since the the libglx.so symbols will take
precedence over the libglapi.so ones.
I've verified this while running 1.14 series Xorg alongside this (and
next) patch.
It may seem a bit fragile, but that's of reasonably OK since all of the
affected Xorg versions have been EOL for years.
The final one being the 1.14 series, which saw its final bug fix release
1.14.7 in June 2014.
To ensure that the binaries do not have unresolved symbols add
-no-undefined and $(LD_NO_UNDEFINED), just like we do everywhere else
throughout mesa.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98428
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 79a26b663a)
If the gbm_create_device() call here actually did fail, any subsequent
eglTerminate on the display would segfault.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit f258815c7d)
According to the spec we get VK_ERROR_OUT_OF_HOST_MEMORY or
VK_ERROR_OUT_OF_DEVICE_MEMORY on vkBindImageMemory failure.
Fixes returned value changed by b546c9d.
Fixes: b546c9d ("anv: anv_gem_mmap() returns MAP_FAILED as mapping error")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 939b015736)
