We already store this in gl_shader and gl_program here we
remove it from gl_shader_program and just use the values
from gl_shader.
This will allow us to keep the shader cache restore code as
simple as it can be while making it somewhat clearer where these
values originate from.
V2: remove unnecessary NULL check
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral <itoral@igalia.com>
There's special logic around finding gl_FragData. It latches onto any
array with FRAG_RESULT_DATA0. However gl_SecondaryFragDataEXT[], added
by GL_EXT_blend_func_extended, fits those parameters as well. The real
frag data array should have index 0 though, so we can use that to
distinguish them.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96617
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
SPIR-V treats it as an input but NIR wants the system value. This
shouldn't have been too much of a surprise given that we have to do the
same conversion in the GLSL IR to NIR pass.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Just setting builder->exact isn't sufficient because that only applies to
instructions that are built with the builder but instructions created
manually and only inserted using the builder are left alone.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This pass is similar to propagate_invariance in the GLSL compiler. The
real "output" of this pass is that any algebraic operations which are
eventually consumed by an invariant variable get marked as "exact".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
While mathematically correct, these two optimizations result in an
expression with substantially lower precision than the original. For any
positive finite floating-point value, log2(x) is well-defined and finite.
More precisely, it is in the range [-150, 150] so any sum of logarithms
log2(a) + log2(b) is also well-defined and finite as long as a and b are
both positive and finite. However, if a and b are either very small or
very large, their product may get flushed to infinity or zero causing
log2(a * b) to be nowhere close to log2(a) + log2(b).
This imprecision was causing incorrect rendering in Talos Principal because
part of its HDR rendering process involves doing 8 texture operations,
clamping the result to [0, 65000], taking a dot-product with a constant,
and then taking the log2. This is done 6 or 8 times and summed to produce
the final result which is written to a red texture. In cases where you
have a region of the screen that is very dark, it can end up getting a
result value of -inf which is not what is intended.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96425
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Previously some callers of precision_qualifier_allowed would strip the
arrayness from the type and some would not. As a result, some places
would not notice that float[6], for example, needed a precision
qualifier.
Fixes the new piglit test no-default-float-array-precision.frag.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96358
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Gregory Hainaut <gregory.hainaut@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Instead use the internal gl_shader_stage enum everywhere. This
makes things more consistent and gets rid of unnecessary
conversions.
Ideally it would be nice to remove the Type field from gl_shader
altogether but currently it is used to differentiate between
gl_shader and gl_shader_program in the ShaderObjects hash table.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
i965 has no special hardware for this, so the best way to implement
this is to pass it in via a uniform.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
i965 has no special hardware for this, so we need to pass this value in
as a uniform (unless the TES is linked against a TCS, in which case the
linker can just replace this with a constant).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
Built-in variable "MaxCombinedShaderStorageBlocks" was added to GLSL 4.40
revision 9.
Section "1.2.1 Changes since revision 8 of GLSL version 4.40",
page 3 of the PDF states:
"Bug 11734: Add gl_MaxCombinedShaderOutputResources and mark
gl_MaxCombinedImageUnitsAndFragmentOutputs as deprecated."
Fixes: GL44-CTS.shader_image_load_store.basic-glsl-const
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This change makes sure to remove arrays when checking if type
is a double.
The check for the end of the first slot of a multi-slot double
is also fixed by bumping the check to 4 rather than 3.
Previously we were we not reserving the last component.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since this extension allows more than one varying to share a single
location we can't just count the number of slots a varying takes and
add it to the total.
Instead we now reuse the reserved varyings bitfield to determine how
many slots are reserved for explicit locations instead.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Adding 64-bit integers support was going to make this file worse,
just remove the tabs from it now.
Acked-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the future int64 support will have the same requirements.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just prep work for int64 support, changing
places where 64-bit matters no doubles.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves code to the new check in advance of int64 support.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds an inline and type query for if a type is 64-bit.
Fow now this is equivalent to double, but int64 will change
this.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just stops counting and assigning a storage location for
these uniforms, the count is only used to create the uniform storage.
These uniform types don't use this storage.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Could cause issues if you tried to read from an uninitialised pointer.
This just initalises the pointer to null to avoid that being a problem.
Discovered by Coverity.
CID: 1343616
Signed-off-by: Jakob Sinclair <sinclair.jakob@openmailbox.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We've had a FINISHME here since Eric originally wrote the code in 2011.
This patch implements his suggested approach, which makes us actually
able to copy propagate into the loops, at the unfortunate cost of making
this pass even more expensive.
The shader-db statistics are basically a wash:
No change in instruction counts.
total cycles in shared programs: 78685980 -> 78680730 (-0.01%)
cycles in affected programs: 2102646 -> 2097396 (-0.25%)
helped: 48
HURT: 83
I figured if we're going to do this for one copy propagation pass,
we may as well do it in both.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We've had a FINISHME here since Eric originally wrote the code in 2010.
This patch implements his suggested approach, which makes us actually
able to copy propagate into the loops, at the unfortunate cost of making
this pass even more expensive.
The shader-db statistics are not terribly impressive:
total instructions in shared programs: 9008589 -> 9008613 (0.00%)
instructions in affected programs: 4293 -> 4317 (0.56%)
helped: 0
HURT: 10
total cycles in shared programs: 78550978 -> 78575760 (0.03%)
cycles in affected programs: 655426 -> 680208 (3.78%)
helped: 75
HURT: 88
GAINED: 2
Most of the "regressions" appear to be us successfully copy propagating
uniforms, which i965 is loading as pull constants instead of push, so we
occasionally have two pulls instead of one. That doesn't seem like this
pass's job - it's propagating correctly, and we should be smarter about
pull loads in the backend.
This patch is also useful for a couple of reasons:
1. It can clean up copies created by varying packing (previously, we
couldn't if the uses were inside a loop).
This fixes a bug when interpolateAt*() is used on a packed varying
inside a loop: glsl_to_nir struggles to see through the extra copy
and mistakenly believed the variable was not an input.
2. It will help propagate uniform array access created by
lower_const_array_to_uniforms().
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
From GLSL 4.5 spec, "4.4.2.3 Geometry Outputs".
"all geometry shader output vertex count declarations in a
program must declare the same count."
Fixes:
GL45-CTS.geometry_shader.output.conflicted_output_vertices_max
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Although the glsl_types.h stores this in a bitfield,
we should hide that from everyone else. Hide the cast
in an accessor method and use the enum everywhere.
This makes things a bit nicer in gdb, and improves type
safety.
v2: fix a few pieces of interface I missed that caused some
piglit regressions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
With tessellation shaders we can have cases where we have
arrays of anon structs, so make sure we match using without_array().
Fixes:
GL45-CTS.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_in
v2:
test lengths match as well (Ilia)
v3:
descend array lengths to check for matches as well (Ilia)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a crash in
GL43-CTS.shader_subroutine.subroutines_not_allowed_as_variables_constructors_and_argument_or_return_types
If we can't find the func_name in one of these paths,
we have emitted an earlier error so just return here.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GL43-CTS.compute_shader.work-group-size does
uniform uint g_uniform[gl_WorkGroupSize.z + 20] = { 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 };
The initializer triggers the GLSL 4.30/GLES3 tests
for constant sequence subexpressions, so it doesn't
happen unless you are using those, so just return
false as this path is now reachable.
v2: update commit msg with diagnosis
Acked-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Getting rid of the default case makes the compiler warn if we are missing
cases. While we're here, we also add the one missing case.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
glslang frequently throw bogus decorations into shaders. While we are free
to assert-fail, it's a bit nicer to the application to just warn.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Previously we supported a subset of capabilities and just left a default
case for the others. It's time to stop being lazy and actually audit the
capabilities. This should bring them up-to-date with reality.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
We were using this briefly in the i965 driver to trigger recompiles but we
haven't been using it since we switched to the NIR y-transform lowering
pass.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes the 7 dEQP-VK.pipeline.spec_constant.compute.local_size.* tests
in the latest dev version of the Vulkan CTS.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This fixes about 100 of the new Vulkan CTS tests.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Some optimizations, like converting integer multiply/divide into left/
right shifts, have additional constraints on the search expression.
Like requiring that a variable is a constant power of two. Support
these cases by allowing a fxn name to be appended to the search var
expression (ie. "a#32(is_power_of_two)").
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes the following building error:
target C++: libmesa_glsl <= external/mesa/src/compiler/glsl/glsl_to_nir.cpp
In file included from external/mesa/src/compiler/glsl/glsl_to_nir.h:28:0,
from external/mesa/src/compiler/glsl/glsl_to_nir.cpp:28:
external/mesa/src/compiler/nir/nir.h:42:25: fatal error: nir_opcodes.h: No such file or directory
compilation terminated.
build/core/binary.mk:432: recipe for target 'out/target/product/x86/obj/STATIC_LIBRARIES/libmesa_glsl_intermediates/glsl/glsl_to_nir.o' failed
make: *** [out/target/product/x86/obj/STATIC_LIBRARIES/libmesa_glsl_intermediates/glsl/glsl_to_nir.o] Error 1
make: *** Waiting for unfinished jobs....
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When lowering, we always want to use the clip dist varying.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Because apparently layout(max_vertices=0) is a thing.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
With the introduction of fp64 and fp16 to nir, there are now a bunch of
float types running around. A F1 2015 shader ends up with an i2f.sat
operation, which has a nir_type_float32 destination. Allow sat on all
the float destination types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
