e2791b38b4
mesa/program_interface_query: fix transform feedback varyings.
caused a regression in
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_multiple_streams
on radeonsi.
The problem was it was using the skip components varying to set
the stream id, when it should wait until a varying was written,
this just adds the varying checks in the right place.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit aac90ba292.
The commit caused a regression in:
piglit.spec.glsl-1_50.compiler.gs-input-nonarray-named-block.geom
Also the CTS test it was meant to fix seems like it may be bogus.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
The CTS test:
GL45-CTS.multi_bind.dispatch_bind_image_textures
binds 192 image uniforms, we reject this later,
but not until after we trash the contents of the
struct gl_shader.
Error now reads:
Too many compute shader image uniforms (192 > 16)
instead of
Too many compute shader image uniforms (2745344416 > 16)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This partially fixes CTS test:
GL44-CTS.enhanced_layouts.xfb_get_program_resource_api
The test now fails at a tes evaluation shader with unsized output arrays.
The ARB_enhanced_layouts spec says:
"It is a compile-time error to apply xfb_offset to the declaration of an
unsized array."
So this seems like a bug in the CTS.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The spec says gl_NextBuffer and gl_SkipComponents need to be
returned to userspace in the program interface queries.
We currently throw those away, this requires a complete piglit
run to make sure no drivers fallover due to the extra varyings.
This fixes:
GL45-CTS.program_interface_query.transform-feedback-built-in
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These types can't be returned.
This fixes:
GL43-CTS.shader_subroutine.subroutines_not_allowed_as_variables_constructors_and_argument_or_return_types
for the return type case.
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This stops the offset being bumped again when and an explicit
alignment has already been applied.
Fixes alignment issues in:
GL44-CTS.enhanced_layouts.uniform_block_alignment
Note the test still fails due to unrelated issues with doubles.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
The old code called this on the prelinked shader list,
but at this point we have the linked shader, so we should
call the interface on that alone.
This fixes a regression in:
dEQP-GLES31.functional.ssbo.layout.random.all_per_block_buffers.13
introduced in
5b2675093e
glsl: handle implicit sized arrays in ssbo
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96228
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reported-by: Mark James
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now that we have the better nir_foreach_block macro, there's no reason to
use the archaic block version for everything.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
SPIR-V specifies that a bunch of stuff gets applied to types. This means
taht a local variable could get, for instance, an array stride. Just
because it's pointless doesn't mean you'll never see it.
v2: Also support GL_EXT_shader_io_blocks. It's pretty much identical to
the OES extension. Suggested by Ilia.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The interface type, interpolation mode, precision, the type of the
outermost structure, and whether or not the variable has an explicit
location will be used for SSO validation on OpenGL ES.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
There's no good reason for it to be a struct of an anonymous union.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96221
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Right now libglsl.la depends on libnir.la so putting it in libnir.la
adds a dependency on libglsl.la that goes the wrong direction.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
It executes compiler-glsl on all the available shaders, and it checks
that the outcome is the expected.
Bash code based on the already existing optimization-test
v2: rebasing: use --version option
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Add an option in order to ask to just print the InfoLog, without any
header or separator. Useful if we want to use the standalone compiler
to track only the warning/error messages.
v2: all printfs goes on its own line (Ian Romanick)
v3: rebasing: move just_log to standalone.h/cpp
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It silence by default warnings with function parameters, as the
parameters need to be processed in order to have the actual and the
formal parameter, and the function signature. Then it raises the
warning if needed at verify_parameter_modes where other in/out/inout modes
checks are done.
v2: fix comment style, multi-line condition style, simplify check,
remove extra blank (Ian Romanick)
v3: inout function parameters can raise the warning too (Ian
Romanick)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Just to allow to call set_is_lhs on any ast_node without a casting. Useful
when processing a ast_node list that we know it contain ast_expression.
v2: comment out new_value to avoid unused parameter warning (Ian Romanick)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The current code disallows unsized arrays except at the end of
an SSBO but it is a bit overzealous in doing so.
struct a {
int b[];
int f[4];
};
is valid as long as b is implicitly sized within the shader,
i.e. it is accessed only by integer indices.
I've submitted some piglit tests to test for this.
This also has no regressions on piglit on my Haswell.
This fixes:
GL45-CTS.shader_storage_buffer_object.basic-syntax
GL45-CTS.shader_storage_buffer_object.basic-syntaxSSO
This patch moves a chunk of the linker code down, so
that we don't link the uniform blocks until after we've
merged all the variables. The logic went something like:
Removing the checks for last ssbo member unsized from
the compiler and into the linker, meant doing the check
in the link_uniform_blocks code. However to do that the
array sizing had to happen first, so we knew that the
only unsized arrays were in the last block. But array
sizing required the variable to be merged, otherwise
you'd get two different array sizes in different
version of two variables, and one would get lost
when merged. So the solution was to move array sizing
up, after variable merging, but before uniform block
visiting.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes:
GL44-CTS.tessellation_shader.tessellation_control_to_tessellation_evaluation.data_pass_through
As the OUT_TC interface structures weren't matching because
one of them had explicit_xfb_buffer set when it shouldn't.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Split standalone glsl_compiler into a libstandalone.la and a thin
main.cpp. This way drivers can re-use the glsl standalone frontend in
their own standalone compilers.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It's only a tool for debugging the glsl compiler, and should not be
installed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Rob Herring <robh@kernel.org>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
This text transformation was done automatically via the following shell
command:
$ find -name SCons\* -exec sed -i s/\\s\\+$// '{}' \;
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
From time to time we have had cases where glslang has added a decoration we
don't handle and it has caused problems. This audit ensures that, for
every decoration, we either handle it or hit an unreachable() with an
accurate description of why we don't have to.
This lowers sampling from YUV textures to 1) one or more texture
instructions to sample each plane and 2) color space conversion to RGB.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used to select the plane to sample from for planar
textures.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
V2: fix error checking for arrays and components. V1 was
only taking into account all the array elements and all the
components of one of the varyings during the comparision
and treating the other as a single slot/component.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This prevents array overflow when the block is actually an array of UBOs or
SSBOs. On some hardware such as i965, such overflows can cause GPU hangs.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we would fail to find a match for the second half of a
dvec4 as 'i' would get incremented to 1 before we added the var to
the array at component 0.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The last version of this broke clipping, and I had to spend
sometime getting this working properly.
I had to introduce a third pass to count the clip/cull totals,
all due to one messy corner case. We have a piglit test
tes-input-gl_ClipDistance.shader_test
that doesn't actually output the clip distances, it just passes
them like a varying from TCS->TES, the older lowering pass worked
but to lower clip/cull we need to know the total number of clip+culls
used to defined the new variable correctly, and to offset culls
properly.
This adds an extra pass that works out the sizes for clip/cull,
then lowers gl_ClipDistance then gl_CullDistance into the new
gl_ClipDistanceMESA.
The pass checks using the fixed array sizes code if they array
has been referenced, or is actually never used, and ignores
it in the latter case.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
