We'll use the delta for an upcoming internal printf mechanism, where
the PARAM_IDX will be the base printf reloc identifier and the BASE
will be the string id.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25814>
We already have a logical opcode and lower to what is basically a send
instruction. We just weren't using SHADER_OPCODE_SEND, instead having
extra redundant infrastructure for no real gain.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28705>
According to the workaround description:
"For all Data Port messages, DP_FLUSH_TYPE should not be
programmed to Discard."
This issue happens only with certain circumstances but as we are not
using discard, add assert and deal with it later if discard is taken in
to use.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24422>
These fields are overlapping with the ones set by brw_message_desc(),
so the latter should be used instead. This fixes corruption of the
LSC message descriptors when inconsistent values are specified through
both helpers, which can happen if the 'inst->mlen' field is modified
during optimization (e.g. by opt_split_sends()).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28484>
We cannot rely on the immediate message descriptor having accurate
values for mlen and rlen at the IR level, since they are updated at
codegen time via 'inst->mlen' and 'inst->size_written', which could
end up with values inconsistent with the message descriptor if
e.g. the split sends optimization had an effect. Instead, define
helpers that do the computation without relying on the message
descriptor, and use the pre-existing
brw_message_desc_mlen()/brw_message_desc_rlen() helpers (fully
equivalent to the lsc helpers deleted here) during disassembly.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28484>
Message types are expanded to 6-bit encoding now. 5 bits are still the
same field from the Sampler Message Descriptor. The most significant bit
is now bit 31 of the Sampler Message Descriptor. The messages that have
'1 in bit 6 are only to support programmable offsets and those would
require message header. If a sampler type shows only 5 bits encoding, it
is implied bit 6 equal to 0 and there is no requirement for header.
v2 (idr): Trivial formatting changes.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27305>
This can be useful for testing i965_disasm and i965_asm by comparing
bin -> asm -> bin results.
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25657>
v2: Add brw_ir_performance.cpp and brw_fs_generator.cpp changes. Fix
overlapping register allocation (via has_source_and_destination_hazard). Fix
incorrect destination register file encoding.
v3: Prevent lower_regioning from trying to "fix" DPAS sources.
v4: Add instruction latency information for scheduling and perf
estimates.
v5: Remove all mention of DPASW. Suggested by Curro and Caio. Update
the comment in fs_inst::has_source_and_destination_hazard. Suggested
by Caio.
v6: Add some comments near the src2 calculation in
fs_inst::size_read. Suggested by Caio.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25994>
align is a function and when we want use it, the align variable will shadow it
So replace it with other names
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25997>
Gives use 4Gb of bindless surface state on Gfx12.5+ instead of 64Mb.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21645>
The only reason for the separate opcode was because of the overlapping
BRW_AOP_* enums, making it impossible to tell whether a particular AOP
was the integer or float operation. Now that we use the lsc_opcode
enums, we can just have the legacy lowering inspect the opcode and
select the right descriptor. No need for a separate opcode.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
There are a number of places that need to know how many operands an LSC
atomic takes (0 for inc/dec, 1 for most things, 2 for cmpxchg). We can
add a helper for that and eliminate some code (with more to come).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
This gets our logical atomic messages using the lsc_opcode enum rather
than the legacy BRW_AOP_* defines. We have to translate one way or
another, and using the modern set makes sense going forward.
One advantage is that the lsc_opcode encoding has opcodes for both
integer and floating point atomics in the same enum, whereas the legacy
encoding used overlapping values (BRW_AOP_AND == 1 == BRW_AOP_FMAX),
which made it impossible to handle both sensibly in common code.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
We want to call this from brw_disasm.c, so move it out to brw_eu.c
since it's about to become more of a shared utility function than
something specific to the EU validator.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20072>
The initial implementation is a pretty big hammer. Implement the HW
recommendation to minimize cases in which we need a fence.
This improves by 10FPS on some of the Sascha Willems RT demos.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 6031ad4bf6 ("intel/fs: Add Wa_22013689345")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19322>
v2: drop the hardcoded inst->mlen=1 (Rohan)
v3: Move back to LOAD/STORE messages (limited to SIMD16 for LSC)
v4: Also use 4 GRFs transpose loads for fills (Curro)
v5: Reduce amount of needed register to build per lane offsets (Curro)
Drop some now useless SIMD32 code
Unify unspill code
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17555>
When the EU validator encountered an error, it would add an annotation
to the disassembly. Unfortunately, the code to insert an error assumed
that the next instruction would start at (offset + sizeof(brw_inst)),
which is not true if the instruction with an error is compacted.
This could lead to cascading disassembly errors, where we started trying
to decode the next instruction at the wrong offset, and getting lots of
scary looking output:
ERROR: Register Regioning patterns where [...]
(-f0.1.any16h) illegal(*** invalid execution size value 6 ) { align1 $7.src atomic };
(+f0.1.any16h) illegal.sat(*** invalid execution size value 6 ) { align1 $9.src AccWrEnable };
illegal(*** invalid execution size value 6 ) { align1 $11.src };
(+f0.1) illegal.sat(*** invalid execution size value 6 ) { align1 F@2 AccWrEnable };
(+f0.1) illegal.sat(*** invalid execution size value 6 ) { align1 F@2 AccWrEnable };
(+f0.1) illegal.sat(*** invalid execution size value 6 ) { align1 $15.src AccWrEnable };
illegal(*** invalid execution size value 6 ) { align1 $15.src };
(+f0.1) illegal.sat.g.f0.1(*** invalid execution size value 6 ) { align1 $13.src AccWrEnable };
Only the first instruction was actually wrong - the rest are just a
result of starting the disassembler at the wrong offset. Trash ensues!
To fix this, just pass the instruction size in a few layers so we can
record the next offset properly.
Cc: mesa-stable
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17624>
This structure will contain the opcode mapping tables in the next
commit. For now, this is the mechanical change to plumb it into all
the necessary places, and it continues simply holding devinfo.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17309>
This patch creates a new header file, brw_isa_info.h, which will
contains all the functions related to opcode encoding on various
generations. Opcode numbers may have different meanings on different
hardware, so we remap them between an enum we can easily work with
and the hardware encoding.
We move the brw_inst setters and getters to brw_inst.h.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17309>
We haven't exposed this intrinsic as it doesn't directly correspond to
anything in SPIR-V. However, it's used internally by some NIR passes,
namely nir_opt_uniform_atomics().
We reuse most of the infrastructure in brw_find_live_channel, but with
LZD/ADD instead of FBL. A new SHADER_OPCODE_FIND_LAST_LIVE_CHANNEL is
like SHADER_OPCODE_FIND_LIVE_CHANNEL but from the other side.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15484>
include it explicitly in the correct places
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14104>
Update return format field and add SIMD Mode [2] field in sampler
descriptor. Now we can tell sampler to return data in either 32/16 bit
format precision.
v1:
- Drop unnecessary descriptor fields (Jason)
- Handle return format (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11766>
When they re-arranged all the dataport stuff and added the LSC, doing
URB fencing through the dataport no longer makes sense. Instead, there
is now a fence message on the URB shared function.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13092>
