Most tools looking at shader stats assume that there is only a single
resulting binary shader out of a single input. On Intel HW this is not
always the case. So having a statistic on each variant that reports
the maximum dispatch width helps showing improvement on a single
shader in terms of how large we manage to compile it.
For shaders that can be compiled in multiple SIMD width (like fragment
shaders), this will report the maximum dispatch width in the
statistics of each variants.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22014>
The rounding mode only needs to be set once, because 16-bit floats or
preserving denorms aren't supported for the platforms where vec4 is
used.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20232>
An argument could be made that all stage-specific opcodes for vec4
stages should be prefixed with VEC4_ like the stage-agnostic opcodes.
I'll leave those additional sed jobs for another day.
egrep -lr '(VS|GS|TCS)_OPCODE_URB_WRITE' src |\
while read f; do
sed --in-place 's/\(VS\|GS\|TCS\)_OPCODE_URB_WRITE/VEC4_\1_OPCODE_URB_WRITE/g' $f
done
egrep -lr 'T.S_OPCODE[_A-Z]*URB_OFFSETS' src |\
while read f; do
sed --in-place 's/\(T.S_OPCODE[_A-Z]*URB_OFFSETS\)/VEC4_\1/g' $f
done
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17379>
This structure will contain the opcode mapping tables in the next
commit. For now, this is the mechanical change to plumb it into all
the necessary places, and it continues simply holding devinfo.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17309>
We haven't exposed this intrinsic as it doesn't directly correspond to
anything in SPIR-V. However, it's used internally by some NIR passes,
namely nir_opt_uniform_atomics().
We reuse most of the infrastructure in brw_find_live_channel, but with
LZD/ADD instead of FBL. A new SHADER_OPCODE_FIND_LAST_LIVE_CHANNEL is
like SHADER_OPCODE_FIND_LIVE_CHANNEL but from the other side.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15484>
In the upcoming intel_clc tool, we're allowing to print these messages
out and some of them just don't look right.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13165>
There are two problems with the current architecture.
In OpenGL, the id is supposed to be a unique identifier for a particular
log source. This is done so that applications can (theoretically)
filter particular log messages. The debug callback infrastructure in
Mesa assigns a uniqe value when a value of 0 is passed in. This causes
the id to get set once to a unique value for each message.
By passing a stack variable that is initialized to 0 on every call,
every time the same message is logged, it will have a different id.
This isn't great, but it's also not catastrophic.
When threaded shader compiles are used, the id *pointer* is saved and
dereferenced at a possibly much later time on a possibly different
thread. This causes one thread to access the stack from a different
thread... and that stack frame might not be valid any more. :(
This fixes shader-db crashes of various kinds on Iris with threaded
shader compiles enabled.
Fixes: 42c34e1ac8 ("iris: Enable threaded shader compilation")
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12136>
Fix defect reported by Coverity Scan.
Missing break in switch (MISSING_BREAK)
unterminated_case: The case for value
VEC4_OPCODE_ZERO_OOB_PUSH_REGS is not terminated by a break
statement.
Fixes: 89fd196f6b ("intel/vec4: Add support for masking pushed data")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11347>
This is the vec4 equivalent of d0d039a4d3, required for proper UBO
pushing in vertex stages for Vulkan on HSW. Sadly, the implementation
requires us to do everything in ALIGN1 mode and the vec4 instruction
scheduler doesn't understand HW_GRF <-> UNIFORM interference so it's
easier to do the whole thing in the generator. We add an instruction
to the top of the program which just means "emit the blob" and all the
magic happens in codegen.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10571>
The way we handle spilling for fp64 in vec4 is to emit a series of MOVs
which swizzles the data around and then a pair of 32-bit spills. This
works great except that the next time we go to pick a spill reg, the
compiler isn't smart enough to figure out that the register has already
been spilled. Normally we do this by looking at the sources of spill
instructions (or destinations of fills) but, because it's separated from
the actual value by a MOV, we can't see it. This commit adds a new
opcode VEC4_OPCODE_MOV_FOR_SCRATCH which is identical to MOV in
semantics except that it lets RA know not to spill again.
Fixes: 82c69426a5 "i965/vec4: support basic spilling of 64-bit registers"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10571>
Render target message descriptors are slightly different from the
dataport ones. In particular the msg_type field is on bits 14:17 for
RT while bits 14:18 for DP.
v2: Drop unused send_commit_msg field in brw_fb_write_desc() (Ken)
v3: Rebase on top renaming (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
The callers already have this value, and we would like to make it
follow different rules other than stage that might not be visible to
the helper function, so just pass explicitly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
v2: Restore the gen == 10 hunk in brw_compile_vs (around line 2940).
This function is also used for scalar VS compiles. Squash in:
intel/vec4: Reindent after removing Gen8+ support
intel/vec4: Silence unused parameter warning in try_immediate_source
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6826>
Shader instructions which use UIP/JIP now get formatted with a label
in addition with immediate value, labels have "LABEL%d" format.
v2: - Consider brw_jump_scale when calculating label's offset
From: "Lonnberg, Toni" <toni.lonnberg@intel.com>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4245>
Instead of emitting the stall MOV "inside" the
SHADER_OPCODE_MEMORY_FENCE generation, use the scheduling fences when
creating the IR.
For IvyBridge, every (data cache) fence is accompained by a render
cache fence, that now is explicit in the IR, two
SHADER_OPCODE_MEMORY_FENCEs are emitted (with different SFIDs).
Because Begin and End interlock intrinsics are effectively memory
barriers, move its handling alongside the other memory barrier
intrinsics. The SHADER_OPCODE_INTERLOCK is still used to distinguish
if we are going to use a SENDC (for Begin) or regular SEND (for End).
This change is a preparation to allow emitting both SENDs in Gen11+
before we can stall on them.
Shader-db results for IVB (i965):
total instructions in shared programs: 11971190 -> 11971200 (<.01%)
instructions in affected programs: 11482 -> 11492 (0.09%)
helped: 0
HURT: 8
HURT stats (abs) min: 1 max: 3 x̄: 1.25 x̃: 1
HURT stats (rel) min: 0.03% max: 0.50% x̄: 0.14% x̃: 0.10%
95% mean confidence interval for instructions value: 0.66 1.84
95% mean confidence interval for instructions %-change: 0.01% 0.27%
Instructions are HURT.
Unlike the previous code, that used the `mov g1 g2` trick to force
both `g1` and `g2` to stall, the scheduling fence will generate `mov
null g1` and `mov null g2`. During review it was decided it was not
worth keeping the special codepath for the small effect will have.
Shader-db results for HSW (i965), BDW and SKL don't have a change
on instruction count, but do report changes in cycles count, showing
SKL results below
total cycles in shared programs: 341738444 -> 341710570 (<.01%)
cycles in affected programs: 7240002 -> 7212128 (-0.38%)
helped: 46
HURT: 5
helped stats (abs) min: 14 max: 1940 x̄: 676.22 x̃: 154
helped stats (rel) min: <.01% max: 2.62% x̄: 1.28% x̃: 0.95%
HURT stats (abs) min: 2 max: 1768 x̄: 646.40 x̃: 362
HURT stats (rel) min: <.01% max: 0.83% x̄: 0.28% x̃: 0.08%
95% mean confidence interval for cycles value: -777.71 -315.38
95% mean confidence interval for cycles %-change: -1.42% -0.83%
Cycles are helped.
This seems to be the effect of allocating two registers separatedly
instead of a single one with size 2, which causes different register
allocation, affecting the cycle estimates.
while ICL also has not change on instruction count but report changes
negative changes in cycles
total cycles in shared programs: 352665369 -> 352707484 (0.01%)
cycles in affected programs: 9608288 -> 9650403 (0.44%)
helped: 4
HURT: 104
helped stats (abs) min: 24 max: 128 x̄: 88.50 x̃: 101
helped stats (rel) min: <.01% max: 0.85% x̄: 0.46% x̃: 0.49%
HURT stats (abs) min: 2 max: 2016 x̄: 408.36 x̃: 48
HURT stats (rel) min: <.01% max: 3.31% x̄: 0.88% x̃: 0.45%
95% mean confidence interval for cycles value: 256.67 523.24
95% mean confidence interval for cycles %-change: 0.63% 1.03%
Cycles are HURT.
AFAICT this is the result of the case above.
Shader-db results for TGL have similar cycles result as ICL, but also
affect instructions
total instructions in shared programs: 17690586 -> 17690597 (<.01%)
instructions in affected programs: 64617 -> 64628 (0.02%)
helped: 55
HURT: 32
helped stats (abs) min: 1 max: 16 x̄: 4.13 x̃: 3
helped stats (rel) min: 0.05% max: 2.78% x̄: 0.86% x̃: 0.74%
HURT stats (abs) min: 1 max: 65 x̄: 7.44 x̃: 2
HURT stats (rel) min: 0.05% max: 4.58% x̄: 1.13% x̃: 0.69%
95% mean confidence interval for instructions value: -2.03 2.28
95% mean confidence interval for instructions %-change: -0.41% 0.15%
Inconclusive result (value mean confidence interval includes 0).
Now that more is done in the IR, more dependencies are visible and
more SWSB annotations are emitted. Mixed with different register
allocation decisions like above, some shaders will see more `sync
nops` while others able to avoid them.
Most of the new `sync nops` are also redundant and could be dropped,
which will be fixed in a separate change.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3278>
So we can eventually remove the cycle count estimates from the CFG
data structure and consolidate performance information in the
brw::performance object.
It would be cleaner to pass the brw::performance object directly to
the disassembler but that isn't straightforward since the disassembler
is built as a plain C file unlike the rest of the compiler back-end.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These should be more accurate than the current cycle counts, since
among other things they consider the effect of post-scheduling passes
like the software scoreboard on TGL. In addition it will enable us to
clean up some of the now redundant cycle-count estimation
functionality in the instruction scheduler.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mostly this uses util_is_power_of_two_or_zero, which has the same
behavior as _mesa_is_pow_two when the input is zero. In cases where the
value is known to be != 0 ahead of time I used the _nonzero variant as
it may be faster on some platforms.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3024>
Change brw_memory_fence to return the number of messages emitted, and
use that to update the send_count statistic in code generation.
This will fix the book-keeping for IVB since the memory fences will
result in two SEND messages.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4646>
This make shader-db's report.py work on Haswell and earlier platforms.
The problem is that the script would detect the "sends" output for
scalar shaders and expect in in vec4 shaders too. When it didn't find
it, the script would fail with:
Traceback (most recent call last):
File "./report.py", line 351, in <module>
main()
File "./report.py", line 182, in main
before_count = before[p][m]
KeyError: 'sends'
Fixes: f192741ddd ("intel/compiler: Report the number of non-spill/fill SEND messages")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This commit is all annoying plumbing work which just adds support for a
new brw_compile_stats struct. This struct provides a binary driver
readable form of the same statistics we dump out to stderr when we
INTEL_DEBUG is set with a shader stage.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When dumping shader's assembly with INTEL_DEBUG=vs,tcs,...
sha1 of the resulting assembly is also printed, having environment
variable INTEL_SHADER_ASM_READ_PATH present driver will try to
load a "%sha1%.bin" file from the path and substitute current
assembly with the one from the file.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen11 SLM is not on L3 anymore, so now the hardware has two separate
fences. Add a way to control which fence types to use.
At this time, we don't have enough information in NIR to control the
visibility of the memory being fenced, so for now be conservative and
assume that fences will need a stall. With more information later
we'll be able to reduce those.
Fixes Vulkan CTS tests in ICL:
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_nonlocal.workgroup.guard_local.buffer.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.image.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.image.guard_nonlocal.workgroup.comp
The whole set of supported tests in dEQP-VK.memory_model.* group
should be passing in ICL now.
v2: Pass BTI around instead of having an enum. (Jason)
Emit two SHADER_OPCODE_MEMORY_FENCE instead of one that gets
transformed into two. (Jason)
List tests fixed. (Lionel)
v3: For clarity, split the decision of which fences to emit from the
emission code. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We set header_present but then pass it some random garbage. Give it g0
instead. I'm not actually sure this does anything but g0 is the usual
header data and this is what the windows driver does so it seems like a
good idea.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For the W or UW (signed or unsigned word) source types, the 16-bit value
must be replicated in both the low and high words of the 32-bit
immediate value.
v2: Fix replication in other places as well
V3: fix a few nits (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The scalar back-end uses SHADER_OPCODE_SEND for all surface messages so
we no longer need the non-logical opcodes there. Prefix them VEC4 so
it's clear that they're only used by the vec4 back-end.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
