Just everything you need for UVD with r600g and radeonsi.
v2: move UVD code to radeon subdir, clean up build system additions,
remove an unused SI function, disable tiling on SI for now.
v3: some minor indentation fix and rebased
v4: dpb size calculation fixed
v5: implement proper fall-back in case the kernel doesn't support UVD,
based on patches from Andreas Boll but cleaned up a bit more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Separated from UVD patch for clarity.
v2: sync with next tree for 3.10
v3: as pointed out by Andreas Bool check for drm minor >= 32
http://cgit.freedesktop.org/~agd5f/linux/log/?h=drm-next-3.10-wip
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
both mov and ucmp can be used to move variables of any type.
correctly note that about ucmp in the tgsi_info and make
sure gallivm can handle that by correctly casting the untyped
moves.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We were using simple temporaries, without using alloca or phi
nodes which meant that on every iteration of the loop our
temporaries, which were holding the number of vertices and
primitives which were emitted, were being reset to zero. Now
we're using alloca to allocate those variables to preserve
them across conditionals.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We were missing the implementation of PIPE_QUERY_SO_STATISTICS
query, this change implements it on top of the existing
facilities.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We want to both make sure we never divide by zero to not generate
sigfpe and that divide by zero is guaranteed to return 0xffffffff.
Based on José idea.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
we break when the mask values are 0 not, 1, plus it's bit comparison
not a floating point comparison. This fixes both.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
v2: fix instrinsic name as well
v3: LLVM revision incremented as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Drawing subtitles didn't increased the dirty area of the surface.
Reported and tested by freeedrich on irc.
v2: don't clear the surface
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes uninitialized scalar variable defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The multiplication part of tgsi_umad did not work on Cayman, because it did
not populate the correct vector slots.
This fixed hardlocks in the EXT_transform_feedback/order tests.
NOTE: This is a candidate for the stable branches.
(might not be easy to cherry-pick though)
Signed-off-by: Marek Olšák <maraeo@gmail.com>
v2:
- Only dump shaders when env variable is set.
v3:
- Don't emit VGT registers
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com
This function is a holdover from r600g and is identical to
si_pm4_inval_texture_cache(), so it is not needed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com
This target string now contains four values instead of three. The old
processor field (which was really being interpreted as arch) has been split
into two fields: processor and arch. This allows drivers to pass a
more a more detailed description of the hardware to compiler frontends.
v2:
- Adapt to libclc changes
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Add UTIL_FORMAT_LAYOUT_ETC to util_format_is_compressed. It was missing.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Don't check if there's sampler support for stencil if we're not
going to actually blit/copy stencil values. Fixes the case where
we mistakenly said we can't support a blit of depth values from
S8Z24 to X8Z24.
Also, rename the is_stencil variable to dst_has_stencil to improve
readability.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Switch to use the envytools generated headers for register/bitfield
definitions. This is the first step in preparing to add a3xx support,
since it avoids having conflicting names for a3xx and a2xx registers.
And since I'm using envytools for a3xx it is simpler to just use it for
everything.
This shouldn't cause any functional change, it is really just a lot of
renaming.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Otherwise we will not receive destroy windows events, causing framebuffers
to leak.
This happens particularly with java and jogl.
Tested with java + jogl, MATLAB.
VMware Internal Bug Number: 1013086.
Reviewed-by: Brian Paul <brianp@vmware.com>
At least on llvm 3.2 this appears to work fine. Tested on an Athlon XP
2600+, which has sse and 3dnow but not sse2.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Build time option, set RADEON_CS_DUMP_ON_LOCKUP to 1 in radeon_drm_cs.h to
enable it.
When enabled after each cs submission the code will try to detect lockup by
waiting on one of the buffer of the cs to become idle, after a timeout it
will consider that the cs triggered a lockup and will write a radeon_lockup.c
file in current directory that have all information for replaying the cs.
To build this file :
gcc -O0 -g radeon_lockup.c -ldrm -o radeon_lockup -I/usr/include/libdrm
v2: Add radeon_ctx.h file to mesa git tree
v3: Slightly improve dumped file for easier editing, only dump first faulty cs
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
The default wrap mode (PIPE_TEX_WRAP_REPEAT) is incompatible with
unnormalized texcoords (at least for softpipe).
v2: use PIPE_TEX_WRAP_CLAMP_TO_EDGE
Reviewed-by: Marek Olšák <maraeo@gmail.com>
The ar_ge_as_at variable was just very very confusing since the condition
was actually the other way around (as_at_ge_ar). So change the condition
(and the selects depending on it) to match the variable name.
And also change the chosen major axis in case the coord values are the
same. OpenGL doesn't care one bit which one is chosen in this case but
it looks like dx10 would require z chosen over y, and y chosen over x
(previously did x chosen over y, y chosen over z). Since it's all the
same effort just honor dx10's wishes. (Though actually, for some prefered
orderings, we could save one (or two with derivatives) selects since the
tnewx and tnewz (and the corresponding dmax values) are the same.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
GCC 4.8 now warns about typedefs that are local to a scope and not
used anywhere within that scope. This produced spurious warnings with
the STATIC_ASSERT() macro (which used a typedef to provoke a compile
error in the event of an assertion failure).
This patch switches to a simpler technique that avoids the warning.
v2: Avoid GCC-specific syntax. Also update p_compiler.h.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The former just checks that the given block is valid by checking
the header and footer.
The later sets the memory block's tag. With extra debug code, we
can use that for monitoring/checking particular allocations.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This is trivial now, though need to make sure we pass all the necessary
derivative values (which is 3 each for ddx/ddy not 2).
Passes piglit arb_shader_texture_lod-texgradcube test.
v2: add the forgotten abs() for all incoming derivatives (discovered
by new piglit arb_shader_texture_lod-texgradcube test, though more by
luck as it was failing only for exactly one pixel...).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This proved to be tricky, the problem is that after selection/mirroring
we cannot calculate reasonable derivatives (if not all pixels in a quad
end up on the same face the derivatives could get "randomly" exceedingly
large).
However, it is actually quite easy to simply calculate the derivatives
before selection/mirroring and then transform them similar to
the cube coordinates (they only need selection/projection, but not
mirroring as we're not interested in the sign bit, of course). While
there is a tiny bit more work to do (need to calculate derivs for 3
coords instead of 2, and additional selects) it also simplifies things
somewhat for the coord selection itself (as we save some broadcast aos
shuffles, and we don't need to calculate the average vector) - hence if
derivatives aren't needed this should actually be faster.
Also, this has the benefit that this will (trivially) work for explicit
derivatives too, which we completely ignored before that (will be in a
separate commit for better trackability).
Note that while the way for getting rho looks very different, it should
result in "nearly" the same values as before (the "nearly" is only because
before the code would choose the face based on an "average" vector and hence
the derivatives calculated according to this face, where now (for implicit
derivatives) the derivatives are projected on the face selected for the
first (top-left) pixel in a quad, so not necessarly the same face).
The transformation done might not quite be state-of-the-art, calculating
length(dx,dy) as max(dx,dy) certainly isn't neither but this stays the
same as before (that is I think a better transform would _somehow_ take
the "derivative major axis" into account so that derivative changes in
the major axis wouldn't get ignored).
Should solve some accuracy problems with cubemaps (can easily be seen with
the cubemap demo when switching wrapping/filtering), though we still don't
do seamless filtering to fix it completely (so not per-sample but per-pixel
is certainly better than per-quad and already sufficient for accurate
results with nearest tex filter).
As for performance, it seems to be a tiny bit faster too (maybe 3% or so
with cubemap demo). Which I'd have expected with nearest/nearest filtering
where this will be less instructions, but the difference seems to actually
be larger with linear/linear_mipmap_linear where it is slightly more
instructions, probably the code appears less serialized allowing better
scheduling (on a sandy bridge cpu). It actually seems to be now at least
as fast as the old path using a conditional when using 128bit vectors too
(that is probably more a result of testing with a newer cpu though), for now
that old path is still there but unused.
No piglit regressions.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Using a different packing for the single coord case should save a shuffle.
Plus some minor style fixes.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Should be way faster of course on cpus supporting this (includes AMD
Bulldozer and Jaguar cores, Intel Ivy Bridge and up (except budget models)).
Passes piglit fbo-blending-formats GL_ARB_texture_float -auto on Ivy Bridge.
Reviewed-by: Brian Paul <brianp@vmware.com>
When geometry shaders are present, one needs to be able to create
an empty geometry shader with stream output that needs to be
resolved later and attached to the currently bound vertex shader.
Lets add support for it to llvmpipe and draw. draw allows attaching
independent stream output info to any vertex shader and llvmpipe
resolves at draw time which vertex shader the given empty geometry
shader should be linked to.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
We need to reset the internal state of the so buffers or we'll
keep appending even though we're not supposed to.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
we use draw_set_mapped_so_targets nowadays
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
I think this was there before and got accidently
removed during a merge. Same code as for the GS
context, which is also using an enum instead of
hardcoded numbers.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
It's quite helpful during the rendering when we know
exactly the count of the vertices available in the
buffer.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
