When a geometry shader is present, the fragment shader gl_PrimitiveID
input acts like an ordinary varying, receiving data from the gs
gl_PrimitiveID output. When there's no geometry shader, we have to
ask the fixed function SF hardware to provide the primitive ID to the
fragment shader instead.
Previously, the SF setup code would handle this situation by
recognizing that the FS gl_PrimitiveID input didn't match to any VS
output; since normally an FS input with no corresponding VS output
leads to undefined data, the SF setup code used to just arbitrarily
assign it to receive data from attribute 0.
This patch changes the SF setup code so that instead of arbitrarily
using attribute 0, it assigns the unmatched FS input to receive
gl_PrimitiveID. In the case where the FS input really is
gl_PrimitiveID, this produces the intended result. In all other
cases, no harm is done since GL specifies that the behaviour is
undefined.
Fixes piglit test primitive-id-no-gs.
v2: If an attribute is already being overridden with point
coordinates, don't try to also override it with gl_PrimitiveID. This
is necessary to avoid regressing piglit tests such as
shaders/glsl-fs-pointcoord.
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Actually implement interop between the gallium
state tracker and the VDPAU backend.
v3: Make it also available in non legacy contexts,
fix video buffer sharing.
v4: deny interop if we don't have the same screen object
v5: rebased on upstream changes
v6: implemented VDPAUGetSurfaceivNV, improved error handling,
unregister all surfaces in VDPAUFiniNV
v7: squash merge with Mareks changes
Signed-off-by: Christian König <christian.koenig@amd.com>
ir_txf expects an ivec* coordinate, and may be larger than ivec2;
shuffle things around so that this will work.
V2: Fix style nits, use ir_builder
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It turns out that nonzero offsets with gsampler2DRect don't work -- they
just return garbage. Work around this by folding the offset into the
coord.
Done as an IR pass rather than yet another hack in the visitors because
it's clear what's going on this way. Can possibly reuse this to replace
the existing txf coord+offset hacks.
V2: Use ir_builder
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't have a message that does 4 independent offsets; a lowering
pass needs to lower it to 4 normal gather4s before reaching this
point.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Note that gather4_po_c's parameters are too long for SIMD16. It might be
worth emitting 2xSIMD8 messages in this case at some point.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
gather4_c's argument layout is straightforward -- refz just goes on the
end.
gather4_po_c's layout however -- the array index is replaced with refz.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ARB_gpu_shader5's textureGather*() functions which take shadow samplers
have a separate `refz` parameter rather than adding it to the
coordinate.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V3: fixup crazy check for whether we need to emit the coordinate after
custom handling.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Some texturing ops are about to have nonconstant offset support; the
offset in the header in these cases should be zero.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The generator code ends up clearer this way than if we had to sniff
via the message length. Implemented via the gather4_po message in
hardware, which is present in Gen7 and later.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Prior to ARB_gpu_shader5 / GLSL 4.0, the offset is required to be
a constant expression.
With that extension, it is relaxed to be an arbitrary expression.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since 062317d667 (i965: Go back to using the kernel SOL reset feature.)
we've been flushing the batch on BeginTransformFeedback(). So it's not
necessary to do it on EndTransformFeedback(). A PIPE_CONTROL will work.
This makes gen7_end_transform_feedback() exactly the same as the gen6
variant. However, they'll diverge again shortly.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was a hack to avoid choosing to schedule all texturing before
consumption of any texture results due to the way dependency chains worked
out in the presence of MRFs. On gen7, we don't have MRFs, so the problem
doesn't apply, and this was just badly constraining our scheduling.
total instructions in shared programs: 1615306 -> 1612534 (-0.17%)
instructions in affected programs: 9958 -> 7186 (-27.84%)
GAINED: 259
LOST: 9
Reviewed-by: Matt Turner <mattst88@gmail.com>
The LIFO plan was simple: Take the most recently made available
instructions, and pick those first.
But because of the order we were pushing things onto our list of
available-to-schedule instructions, it meant that when a set of
instructions was made available at the same time (for example, everything
at the start of the program that didn't depend on other instructions) we'd
schedule them in reverse order.
If you had 10 texture calls in a row in your program, each with
independent argument setup, we'd set up the last texture call's args and
execute it first, even though we wouldn't be able to consume its results
until we'd finished the other 9 texture calls (assuming consumption of
texture results happens near each texture call, and combines it with
another texture result, which is normal for a convolution shader).
To fix this, walk the list for doing LIFO in the order that instructions
were originally generated in the program, but choose to push
newly-made-available instructions to the other end of the list instead.
total instructions in shared programs: 1587242 -> 1586290 (-0.06%)
instructions in affected programs: 7801 -> 6849 (-12.20%)
GAINED: 76
LOST: 67
Thanks to Chia-I Wu for pointing out the bug in my first version of the
patch that made it a huge loss.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When PIPE_CAP_MIXED_FRAMEBUFFER_SIZES is not provided, parts of
ARB_framebuffer_object can't be supported, such as on NV30.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This CAP will determine whether ARB_framebuffer_object can be enabled.
The nv30 driver does not allow mixing swizzled and linear zsbuf/cbuf
textures.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
_XReply returns 1 on success, but indirect_bind_context returns 0 on
success.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70486
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In commit 1b4a737 (glsl: Support redeclaration of VS and GS
gl_PerVertex output), I added code to ensure that when an unnamed
gl_PerVertex interface block is redeclared, any ir_variables that
weren't included in the redeclaration are removed from the IR (and the
symbol table). This ensures that only those variables that were
explicitly redeclared may be used.
However, when I wrote this code, I neglected to match the variable
mode when finding variables to remove. This meant that redeclaring a
built-in output block might cause the built-in input gl_in to be
accidentally removed.
Fixes piglit test gs-redeclares-pervertex-out-only.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The GLSL 4.10 rules for redeclaration of built-in interface blocks
(which we've chosen to regard as clarifications of GLSL 1.50) only
require gl_PerVertex blocks to match in shaders that actually use
those blocks. The easiest way to implement this is to detect
situations where a compiled shader doesn't refer to any elements of
gl_PerVertex, and remove all the associated ir_variables from the
shader at the end of ast-to-ir conversion.
Fixes piglit tests
linker/interstage-{pervertex,pervertex-in,pervertex-out}-redeclaration-unneeded.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Normally when a built-in array (such as gl_ClipDistance) is
redeclared, we call get_variable_being_redeclared() to do the
redeclaration, and it in turn calls check_builtin_array_max_size() to
make sure that the redeclared array size isn't too large.
However when a built-in array is redeclared as part of redeclaring
gl_in, we don't call get_variable_being_redeclared() (since the
individual built-ins aren't each represented by their own ir_variable
anymore). So we need to add an explicit call to
check_builtin_array_max_size() to make sure the new array size isn't
too large.
Note: at the moment this is redundant with a test that's done at link
time, so there's no change to piglit results. But the patch that
follows will prevent link errors from being reported if gl_PerVertex
isn't used, so in order to prevent that patch from causing
regressions, we need to add the compile check now. Besides, it's
nicer to report this error at compile time anyhow.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The queries GEOMETRY_VERTICES_OUT, GEOMETRY_INPUT_TYPE, and
GEOMETRY_OUTPUT_TYPE (defined by GL 3.2) differ from the corresponding
queries in ARB_geometry_shader4 in the following ways:
- They use different enum values
- They can only be queried; they cannot be set.
- Attempting to query them yields INVALID_OPERATION if the program is
not linked, or lacks a geometry shader.
This patch switches us over from the ARB_geometry_shader4 behaviour to
the GL 3.2 behaviour.
Fixes piglit test query-gs-prim-types.
v2: Improve comment above has_core_gs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When program_resource_visitor visits variables that were created by
lower_named_interface_blocks, it needs to do extra work to un-do the
effects of lower_named_interface_blocks and construct the proper API
names.
Fixes piglit test
spec/glsl-1.50/execution/interface-blocks-api-access-members.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These variables will need to be treated specially by
program_resource_visitor, so that they can be addressed through the
API using their interface block name (and array index, for interface
block arrays).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Later patches will use this information to do proper error checking of
interpolation qualifiers that appear inside of interface blocks.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In future patches, we will need this in order to interpret
interpolation qualifiers that appear inside interface blocks.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
