These don't seem to be disallowed by recent hardware anymore. Stop
disabling SIMD32 due to hardware restrictions of multisample
rasterization, since it should have better performance, and on Xe3+
there may be no shader variant available other than SIMD32.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32664>
Request a fixed subgroup size for pixel shaders that require it due to
the hardware restrictions of fast clears and repeated data clears.
This requires plumbing the "is_fast_clear" boolean across several
callers since blorp_compile_fs_brw() currently has no information
regarding whether the kernel is intended for a fast clear operation.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32664>
On older hardware the "use_rep_send" compile parameter was being
implicitly used to request the compilation of the SIMD16 variant of
clear pixel shaders that require it due to hardware restrictions.
However starting on Gfx12+ this flag is never set since replicated
data clears are no longer supported, but BLORP still implicitly relies
on the SIMD16 variant being generated even though there's no way for
BLORP to explicitly request it. This doesn't cause much of a problem
right now since brw_compile_fs() typically generates a SIMD16 kernel
unless the SIMD8 kernel spills or SIMD debugging flags are enabled,
but it won't work reliably on Xe3+ since we'll start using SIMD32 more
aggressively.
In order to avoid these issues use the standard required subgroup_size
parameter from shader_info to signal that the SIMD16 variant of the
shader is needed by the caller.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32664>
The 16-wide variant of the trampoline shader doesn't appear to work
and would be inadvertently enabled by this series on Gfx12.5. Set the
required subgroup size to avoid changing current behavior.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32664>
Makes sure the number of registers reserved for the payload matches
the size of the URB read, which prevents the VS shared function from
writing past the end of the register file on Xe3 with VRT enabled.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32664>
The lavacli version 1.5.2 has been released in December 2022.
Use the most recent version 2.2.0, released in October 2023, instead.
Notable changes since 1.5.2:
- Authentication tokens are now stripped from exceptions when HTTP
requests fail. (1.6)
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33266>
One of the DUTs had to be retired in LAVA a while ago, and the pending
times were high on the dashboard. Decrease the parallelism and increase
the fractions to address this.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
We have more hp-x360-14a-cb0001xx-zork DUTs available in LAVA,
use it to offload the overloaded lenovo-TPad-C13-Yoga-zork.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
This job was taking too long. However, with the other jobs
de-duplicated on a618 and a630, we can increase parallelism,
which also allows us to reduce the fraction.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
a630-gl takes just over 7 minutes on 4 DUTs, so we can safely reduce
the parallelism to 3 and stay within the time limit.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
The a618-gl and a618-egl jobs are covered by a630-gl, which also
does egl testing, while a630-piglit is a more comprehensive
equivalent of a618-piglit, so we can de-duplicate these jobs.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
Currently there are only 8 sm8350-hdk DUTs in LAVA, but there were
10 pre-merge jobs scheduled for them.
Add a full nightly job to cover the gaps.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
The panfrost-g52-piglit-gles2:arm64 job was taking 19 minutes on
average, and the pending durations of the meson-g12b-a311d-khadas-vim3
DUTs in LAVA were reaching 5-6 minutes, so we have to make this job
manual instead of pre-merge.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
There are only 4 DUTs available in LAVA, and their pending durations
were reaching 3–4 minutes. To address this, reduce the parallelism
for iris-glk-deqp and adjust the fractions to maintain the 10-minute
time limit.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
This fixes depth-only rendering with mesh shaders,
as well as array derefs in unlinked shaders in general.
Lowering array derefs of vectors is necessary for correctness.
Without this, nir_lower_io will incorrectly add the array index
to the IO intrinsic base instead of to the component offset.
This was previously only done during shader linking, which leaves
some problems with unlinked shaders and depth-only rendering.
Whether these calls can be safely removed from shader linking
will be investigated in a future commit.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12516
Cc: mesa-stable
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33264>
This is a preliminary implementation of detiling for
NV12_16L32 tiled format external images. When we
encounter such an image, decode it into a secondary
buffer which will then be used to actually texture from.
In some cases applications may wish to represent the individual
planes of an NV12 image separately, we support that by allowing
detiling of just an R8 (luma) or R8G8 (chroma) plane.
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31899>
Taken from commit 3ab334814 of the drm-misc-next kernel tree
Signed-off-by: Eric R. Smith <eric.smith@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31899>
PanVK on V10 GPUs has reached production quality, so let's enable
building it by default now.
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Stone <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33262>
After commit 44bda7c258 (dri: put shared-glapi into libgallium.*.so,
2024-12-26) the mesa Android build does not have a separate libglapi.so
object anymore in the install dir, so stop pushing it to the Android
device in cuttlefish-runner.sh
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33261>
Add a trailing dot to the remote directoyy in the `adb pull` command to
make sure to recursively pull only the **content** of the directory and
not the directory itself.
This prevents having `results/results/` in the artifacts.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33261>
This initial support should be good enough but it's missing two
features (cooperative matrix and video decode/encode) compared to
GFX11 (RDNA3) because lack of time.
DCC is still under active development but it might be possible to
finish it during the RC period.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33281>
Otherwise if the function name is stripped during NIR serialization,
importing libraries would break because entrypoint is NULL.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33273>
So that we can have special behavior based on drirc configuration.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lucas Fryzek <lfryzek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33194>
The 6.11 kernel we were using frequently caused panics and hangs,
particularly in full nightly jobs, making it unreliable.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33279>
