Patch changes blorp_emit_urb_config to use intel_urb_config so that we
can use it later to communicate blorp urb configuration for drivers.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26920>
Patch adds a structure holding urb configuration. This makes it nicer
to pass it around as example for blorp. We need to be able to sometimes
compare with last urb configuration to be able to implement some
workaround.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26920>
In clear_depth_stencil() stencil_surf is defined but not initiaized.
Then in the same function if stencil_mask is calculated and if != 0
stencil_surf is initialized.
But blorp_clear_stencil_as_rgba() access stencil_surf before checking
stencil_mask, what could cause a read of a uninitialized valued.
clear_depth_stencil()
struct blorp_surf stencil_surf;
...
uint8_t stencil_mask = clear_stencil && stencil_res ? 0xff : 0;
if (stencil_mask) {
...
iris_blorp_surf_for_resource(&stencil_surf);
}
...
blorp_clear_depth_stencil(stencil_mask, stencil_surf)
blorp_clear_stencil_as_rgba(stencil_mask, stencil)
if (surf->surf->format ...)
....
Just inverting the order and checking stencil_mask first in
blorp_clear_stencil_as_rgba() fixes the issue.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27390>
This adds a few new fields in the brw_cs_prog_data struct and then
uses them to fill in the relevant COMPUTE_WALKER fields.
Although the Tile Layout field theoretically has different settings for
32/64/128bpe, it appears that the recommended programming is to always
pick either TileY 32bpe or Linear. It's not very practical to look at
the surface formats involved, anyway.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27167>
We'll want to check for Alchemist and set various prog_data fields
in the next patch, in order to enable some optimizations. Passing
NULL for prog_data will remain valid and continue working as before.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27167>
Xe2+ changed the msaa mapping for 2D/3D Tile64 surfaces, introduce a
Xe2+ specific enum to handle this change.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27113>
Add a brw_compile_fs_params parameter that specifies to the compiler
the maximum number of polygons that may be processed in parallel per
PS SIMD thread.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26585>
The depth clear value is provided from 3DSTATE_WM_HZ_OP now.
Signed-off-by: Zhang, Jianxun <jianxun.zhang@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26600>
XY_BLOCK_COPY_BLT and XY_FAST_COLOR_BLT instruction supports AUX_CCS
surface mode. Stencil buffer compression is stencil data with CCS so we
can easily support that on blitter engine.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26167>
The driver already need to track this WA for blorp. We can completely
remove any blorp code dealing with this and instead have the flush
required by the workaround be combined with potential other flushes
the driver already has to insert before blorp operations.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26247>
Refactor some of the blorp code into something more generic that we can
reuse for functionality needed post 3DPRIMITIVE emission.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25039>
The embedding driver could be failing the allocation for whatever
reason, in which case we should skip the surface state writes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25955>
This may help debugging performance problems in the possible case that
TBIMR negatively impacts the performance of some application. It could
also allow applying application-specific band-aid fixes in the XML file
until a more general workaround is implemented.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25493>
Use the correct miptail start LOD for the surfaces involved in the
XY_BLOCK_COPY_BLT/XY_FAST_COLOR_BLT instructions.
Thanks to Lionel for pointing out the issue.
Fixes: 46f45d62d1 ("intel/isl: Start using miptails")
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25688>
Those workarounds are temporary for newer platforms so we can't use
INTEL_NEEDS_WA_*, luckly those already had runtime checks.
INTEL_NEEDS_WA_* was only used because it was accessing instructions
or fields of the instructions that only exists in gfx12 or gfx125.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25685>
Move mesh URB allocations together with the other stages.
This fixes a hang that started happening with mesh enabled after
419531c5d9 ("intel/blorp: add a new flag to communicate PSS sync need")
Bspec 45352 says:
L3 Space allocation can only be changed when the GPU pipeline is
completely flushed.
It's likely that the PIPE_CONTROL added in that commit was breaking that
assumption and the URB allocation happening afterwards at the end of the
pipeline emission would then hang. And before that, we were probably
just getting lucky.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25047>
The data in Ys/Yf/Tile64 tiled images is arranged differently for 2D &
3D images. Therefore we cannot assume that we will use 2D images for
blits/copies.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
BLORP uses the get_ccs_compatible_copy_format() based on whether or not
ISL claims the format supports CCS_E, not whether or not CCS_E is used
on the image. This is probably a good thing as it improves consistency.
However, it means that we need CCS-compatible formats for YCRCB_*
formats even if we never use them with CCS_E enabled. In practice,
these do actually seem to work according to the Vulkan CTS but coverage
is likely far less than perfect.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24619>
Instead, we replace every use of it with nir_def. Most of this commit
was generated by sed:
sed -i -e 's/dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
A few manual fixups were required in lima and the nir_legacy code.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
Catching the cases that Coccinelle missed. Mostly in C++ files using
gtest which causes Coccinelle to just give up and walk away.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24658>
We can disable the MESH/TASK stages by just using the CONTROL
instruction and keep the rest of the HW programmed as before.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24632>
This is required for Wa_18019816803 when blorp emit DS state.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18411>
Before this patch, when updating the indirect clear color, BLORP only
invalidated the texture cache on gfx11. The hardware docs state that
the texture cache invalidation is also needed on gfx12 however. Add
this invalidation for gfx12 and move the fast-clear related cache
invalidations to the drivers for clarity and performance.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5850
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23588>
ISL's state-machine of CCS_D describes full resolves as leaving the aux
buffer in the pass-through state. Hardware doesn't behave this way on
gfx8 however. On that platform, full resolves transition the aux buffer
to the resolved state. This was verified by dumping the CCS before and
after a full resolve on BDW (gfx7 is simply assumed to behave the same).
Ambiguate after resolving to match driver expectations.
Prevents iris from failing piglit's fcc-write-after-clear on BDW with a
future patch which relies on fast-clear encodings being removed after a
resolve. The avoided failure is:
Testing implicit read of partial block UNORM -> SNORM
Probe color at (0,1,0)
Expected: 1.000000 1.000000 1.000000 1.000000
Observed: 0.000000 0.000000 0.000000 0.000000
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23676>
Fixes: 90a39cac87 ("intel/blorp: Emit compute program based on BLORP_BATCH_USE_COMPUTE")
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23934>
Use a struct for various common parameters rather than per stage
structure or arguments to stage specific entrypoints.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Felix DeGrood <felix.j.degrood@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23942>
Set the default value for "Pixel Position Offset Enable" when emitting
3DSTATE_MULTISAMPLE in the genxml so that we can drop it from blorp
and genX_state.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23936>
