Fixes several of the
"dEQP-GLES31.functional.image_load_store*load_store*single_layer" dEQP
tests that use image formats we implement using untyped surface
messages.
Cc: mesa-stable@lists.freedesktop.org
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9e30d66b7c)
This fixes two issues. First, we had a use-after-free in the case where
the instruction got deleted and we tried to return mov->dest.write_mask.
Second, in the case where we are doing a self-mov of a register, we delete
those channels that are moved to themselves from the write-mask. This
means that those channels aren't reported as being handled even though they
are. We now stash off the write-mask before remove unneeded channels so
that they still get reported as handled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94073
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 70dff4a55e)
This fixes an assertion failure in [at least] one of the Unreal Engine Linux
demo/games that uses DXT1 compression. Specifically, the "Vehicle Game".
At some point, the game ends up trying to blit mip level whose size is 2x2,
which is smaller than a DXT1 block. As a result, the assertion in the blit path
is triggered. It should be safe to simply make sure we align the width and
height, which is sadly an example of compression being less efficient.
NOTE: The demo seems to work fine without the assert, and therefore release
builds of mesa wouldn't stumble over this. Perhaps there is some unnoticeable
corruption, but I had trouble spotting it.
Thanks to Jason for looking at my backtrace and figuring out what was going on.
v2: Use NPOT alignment to make sure ASTC is handled properly (Ilia)
Remove comment about how this doesn't fix other bugs, because it does.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93358
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 088280e022)
The fast path for Intel's ReadPixels() unintentionally omits clipping
the specified area to a valid one. Rather than clip in various
corner-cases, perform this operation in the API validation stage.
The bug in intel_readpixels_tiled_memcpy() showed itself when the winsys
ReadBuffer's height was smaller than the one specified by ReadPixels().
yoffset became negative, which was an invalid input for tiled_to_linear().
v2: Move clipping to validation stage (Jason)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92193
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 605832736a)
v2: Use gl_renderbuffer::{Width,Height} (Jason)
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 55d56d34e0)
Ilia Mirkin found/fixed the mistake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93813
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit fe14110f35)
The builtin data can get released with a glReleaseShaderCompiler call.
We're careful everywhere to clone everything that comes out of builtins
except here, where we accidentally return the signature belonging to the
builtin version, rather than the locally-cloned one.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 88519c6087)
The builtin function shader is part of the builtin state, released
when glReleaseShaderCompiler is called. We must ensure that the
builtins have been (re)initialized before attempting to link with the
builtin shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ac57577e29)
The vec4 backend, at the end, does this:
if (inst->is_3src()) {
for (int i = 0; i < 3; i++) {
if (inst->src[i].vstride == BRW_VERTICAL_STRIDE_0)
assert(brw_is_single_value_swizzle(inst->src[i].swizzle));
So make sure that we use the same conditions when trying to
copy-propagate. UNIFORMs will be converted to vstride 0 in
convert_to_hw_regs, but so will ATTRs when interleaved (as will happen
in a GS with multiple attributes). Since the vstride is not set at
copy-prop time, infer it by inspecting dispatch_mode and reject ATTRs if
they have non-scalar swizzles and are interleaved.
Fixes assertion errors in dolphin-generated geometry shaders (or
misrendering on opt builds) on Sandybridge or on IVB/HSW with
INTEL_DEBUG=nodualobj.
Co-authored-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93418
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9f2e22bf34)
GLsync objects had a race condition when used from multiple threads
(which is the main point of the extension, really); it could be
validated as a sync object at the beginning of the function, and then
deleted by another thread before use, causing crashes. Fix this by
changing all casts from GLsync to struct gl_sync_object to a new
function _mesa_get_and_ref_sync() that validates and increases
the refcount.
In a similar vein, validation itself uses _mesa_set_search(), which
requires synchronization -- it was called without a mutex held, causing
spurious error returns and other issues. Since _mesa_get_and_ref_sync()
now takes the shared context mutex, this problem is also resolved.
Fixes bug #92757, found while developing Nageru, my live video mixer
(due for release at FOSDEM 2016).
v2: Marek: silence warnings, fix declaration after code
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit feb53912f8)
Fixup to commit 03b3eb90d - the number of buffers could be larger than
the number of elements, in which case we'd pass a negative argument to
PUSH_SPACE, which would be bad. While we're at it, merge it with the
other PUSH_SPACE at the top of the function.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 2065e380b2)
nvc0_vbo has explicit push space checking enabled, so we must run
PUSH_SPACE by hand. A few spots missed that.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 03b3eb90d7)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_vbo.c
The spill logic will insert convert ops when moving between files. It
seems like the emission logic wasn't quite ready for these converts.
Tested on fermi, and visually looked at nvdisasm output for maxwell.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1a0fde1f52)
64-bit Pentium 4 CPUs don't have the 3DNow prefetch instructions
which results in an Illegal instruction crash.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Timothy Arceri <t_arceri@yahoo.com.au>
https://bugs.freedesktop.org/show_bug.cgi?id=27512
(cherry picked from commit 9c78cfd547)
When a fragment shader is used that has no outputs but does conditional
discard (KILL_IF), all fragments are killed without this patch.
By comparing various register settings, my conclusion is that the exec mask
is either not properly forwarded to the DB by NULL exports or ends up being
unused, at least when there is _only_ a NULL export (the ISA documentation
claims that NULL exports can be used to override a previously exported exec
mask).
Of the various approaches I have tried to work around the problem, this one
seems to be the least invasive one.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93761
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need to tell the address generation functions about the dimensionality of
the texture to correctly implement the part of Section 3.8.1 (Texture Image
Specification) of the OpenGL 2.1 specification which says:
"For the purposes of decoding the texture image, TexImage2D is
equivalent to calling TexImage3D with corresponding arguments
and depth of 1, except that
...
* UNPACK SKIP IMAGES is ignored."
Fixes a low impact bug that was found by chance while browsing the spec and
extending piglit tests.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(cherry picked from commit 4a448a63ad)
The scaling list should be filled out with zig zag scan
v2: integrate zig zag scan for list 4x4 to vl(Christian)
v3: move list determination out from the loop(Ilia)
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6ad2e55a14)
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 4f598f2173)
We use this logic to detect live ranges and then do plain renaming
across the whole codebase. As such, to prevent WaW hazards, we have to
treat a write as if it were also a read.
For example, the following sequence was observed before this patch:
13: UIF TEMP[6].xxxx :0
14: ADD TEMP[6].x, CONST[6].xxxx, -IN[3].yyyy
15: RCP TEMP[7].x, TEMP[3].xxxx
16: MUL TEMP[3].x, TEMP[6].xxxx, TEMP[7].xxxx
17: ADD TEMP[6].x, CONST[7].xxxx, -IN[3].yyyy
18: RCP TEMP[7].x, TEMP[3].xxxx
19: MUL TEMP[4].x, TEMP[6].xxxx, TEMP[7].xxxx
While after this patch it becomes:
13: UIF TEMP[7].xxxx :0
14: ADD TEMP[7].x, CONST[6].xxxx, -IN[3].yyyy
15: RCP TEMP[8].x, TEMP[3].xxxx
16: MUL TEMP[4].x, TEMP[7].xxxx, TEMP[8].xxxx
17: ADD TEMP[7].x, CONST[7].xxxx, -IN[3].yyyy
18: RCP TEMP[8].x, TEMP[3].xxxx
19: MUL TEMP[5].x, TEMP[7].xxxx, TEMP[8].xxxx
Most importantly note that in the first example, the second RCP is done
on the result of the MUL while in the second, the second RCP should have
the same value as the first. Looking at the GLSL source, it is apparent
that both of the RCP's should have had the same source.
Looking at what's going on, the GLSL looks something like
float tmin_8;
float tmin_10;
tmin_10 = tmin_8;
... lots of code ...
tmin_8 = tmpvar_17;
... more code that never looks at tmin_8 ...
And so we end up with a last_read somewhere at the beginning, and a
first_write somewhere at the bottom. For some reason DCE doesn't remove
it, but even if that were fixed, DCE doesn't handle 100% of cases, esp
including loops.
With the last_read somewhere high up, we overwrite the previously
correct (and large) last_read with a low one, and then proceed to decide
to merge all kinds of junk onto this temp. Even if that weren't the
case, and there were just some writes after the last read, then we might
still overwrite a merged value with one of those.
As a result, we should treat a write as a last_read for the purpose of
determining the live range.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 047b917718)
If an instruction has multiple defs, we have to do a lot more checks to
make sure that we can move it forward. Among other things, various code
likes to do
a, b = tex()
if () c = a
else c = b
which means that a single phi node will have results pointing at the
same instruction. We obviously can't propagate the tex in this case, but
properly accounting for this situation is tricky. Just don't try for
instructions with multiple defs.
This fixes about 20 shaders in shader-db, including the dolphin efb2ram
shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 3ca941d60e)
It appears that the nvidia render engine is quite picky when it comes to
linear surfaces. It doesn't like non-256-byte aligned offsets, and
apparently doesn't even do non-256-byte strides.
This makes arb_clear_buffer_object-unaligned pass on both nv50 and nvc0.
As a side-effect this also allows RGB32 clears to work via GPU data
upload instead of synchronizing the buffer to the CPU (nvc0 only).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> # tested on GF108, GT215
Tested-by: Nick Sarnie <commendsarnex@gmail.com> # GK208
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 3ca2001b53)
When using the "shared" vertex array configuration strategy, we bind
each of the buffers as a separate array. However there can be holes in
such vertex buffer lists, so just emit a disable for those.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 438d421f8b)
Just make sure that after we've submitted, we get to at least 5
(global) submits ago before we go on to do more. Prevents up to
seconds of lag with window movement in X with xcompmgr -c. There may
be useful tuning to do in the future, but for now this gets us
usability.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3fba517bdd)
On an error return, the returned seqno will probably be unset, so we'd
lose track of what we've submitted so far for waiting on in the
future.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 2a449ce7c9)
When RA fails, and we spill, we have to clean everything up before doing
RA again. We were forgetting to reset the hi/lo linked lists - at
least the hi list is guaranteed to still have pointers to now-deleted
RIG nodes.
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 19ae5de981)
When setting the conservative thread counts, I halved everything. That isn't
correct for the wm, which has nothing to do with actual thread counts. I suck.
BXT only has 1 slice, and there is some ambiguity about subslices, so just
reserve the max possible for now. It looks like this might fix:
piglit.spec.glsl-1_50.execution.variable-indexing.gs-output-array-vec4-index-wr.bxtm64.
I kind of question why that is, but it is what Jenkins says.
Mark is current running some of the other blacklisted tests on this patch. (it
effects anything requiring scratch space).
Cc: mesa-stable <mesa-stable@lists.freedesktop.org>
Cc: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit a443b5b732)
_mesa_texture_parameteriv is used because (the more obvious)
_mesa_texture_parameteri just stuffs the parameter in an array and calls
_mesa_texture_parameteriv. This just cuts out the middleman.
As a side bonus we no longer need check that ARB_stencil_texturing is
supported. The test doesn't allow non-supporting implementations to
avoid any work, and it's redundant with the value-changed test.
Fix bug #93717 because the state restore commands at the bottom of
_mesa_meta_GenerateMipmap no longer depend on the bound state.
Fixes piglit arb_direct_state_access-generatetexturemipmap with the
changes recently sent to the piglit mailing list. See the bugzilla
entry for more info.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93717
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 2542871387)
Commit c246828c added the code to save and restore the stencil
texturing mode. The restore, however, was erroneously inside the
'target != GL_TEXTURE_RECTANGLE' block.
Fixes piglit test 'arb_stencil_texturing-blit_corrupts_state
GL_TEXTURE_RECTANGLE'.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 18b0ba340b)
This fixes a VM fault and possible lockup in high memory pressure situations.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(cherry picked from commit 1067e6eb55)
Specifically, when the API switches from using a GS to not using a GS and then
back to using the same GS again, we do not have to re-send all the GS state,
but we do have to send VGT_GS_MODE. So make VGT_GS_MODE consistently be a part
of the VS state.
This fixes a rendering bug in Dolphin, but surely other applications are
affected as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93648
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 004fcd4230)
Normally there's a producer and consumer, and the producer var gets
picked. In both the vertex->gs and tes->gs cases, that's the un-arrayed
version.
In the SSO case, however, there is no producer. So we picked the arrayed
GS variable, and as a result, used more slots than we should. More
critically, these slots would also no longer line up with the producer's
calculation. To fix this, we need to fix up the type of the variable
based on stage no matter what.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93650
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dac2964f3e)
This will be used in the following patch for calculating array sizes correctly
when reserving explicit varying locations.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(cherry picked from commit 5907a02ab6)
Otherwise the user has no way of using it, and we'll try to access the
linear one.
v2:
- Bail out when KHR_gl_colorspace is missing and srgb is set (Marek)
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Fixes: c2c2e9ab604(egl: implement EGL_KHR_gl_colorspace (v2))
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91596
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit 54702c2fa1)
By using whole static libraries the android buildsystem provides
whole-archive (alike) solution. This means that we don't need to worry
about the order of the static libraries and any reverse, recursive or
circular dependencies that they have between one another.
Without this the linker will discard any unused hunks of one library
and we'll end up with unresolved symbols as those are required by
another static library. This issue has become more prominent with the
introduction of pipe-loader.
Whole static libraries has been used in i915/i965 for a very long
time, so we might do the same.
v2:
- Better commit message (Ilia)
- Keep external dependencies as [normal] static libs (Mauro)
Cc: mesa-stable@lists.freedesktop.org
Cc: Mauro Rossi <issor.oruam@gmail.com>
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit f29a772a7e)
With an earlier commit we've spit the flags parsing to a separate
function, but forgot to update all the dri modules to use it.
Noticed when we've enabled KHR_debug for every dri module - fdo#93048
Fixes: 38366c0c6e "dri_util: Don't assume __DRIcontext->driverPrivate
is a gl_context"
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit 72fda2b710)
The buffers are referenced from r600_update_driver_const_buffers()
-> r600_set_constant_buffer() -> u_upload_data(), but nothing
ever releases the reference. Similar case with driver_consts.
Found using valgrind.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
[Emil Velikov: resolve trivial conflicts]
(cherry picked from commit 0153ff8379)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Apparently, nobody has combined stippling with a fragment shader
containing immediates in almost five years...
Fixes a bug in Kodi with radeonsi reported by Christian König.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Tested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e6281a2850)
Print the stream value not the pointer to the expression,
also use the unsigned format specifier.
Cc: 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit d018619d7f)
One of the oglconform tests was crashing here, and it was
due to not cloning the actual parameters before creating the
new call. This makes a call clone function that does the right
things to make sure we clone all the needed info, and points
the callee at it. (It differs from ->clone due to this).
this may fix https://bugs.freedesktop.org/show_bug.cgi?id=93722, I had this
patch in my cts fixes tree, but hadn't had time to make sure I liked it.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 119bef9543)
From Section 7.9 (SUBROUTINE UNIFORM VARIABLES) of the OpenGL
4.5 Core spec:
"The command
void UniformSubroutinesuiv(enum shadertype, sizei count,
const uint *indices);
will load all active subroutine uniforms for shader stage
shadertype with subroutine indices from indices, storing
indices[i] into the uniform at location i. The indices for
any locations between zero and the value of
ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS minus one which are not
used will be ignored."
V2: simplify NULL check suggested by Jason.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: "11.0 11.1" mesa-stable@lists.freedesktop.orghttps://bugs.freedesktop.org/show_bug.cgi?id=93731
(cherry picked from commit 86677f1016)
The ARB has decided that implicit conversions should be performed for
bitwise operators in future language revisions. Implementations of
current language revisions may or may not perform them.
This patch makes Mesa apply implicti conversions even on current
language versions. Applications appear to expect this behavior,
and there's really no downside to doing so.
Fixes shader compilation in Shadow of Mordor.
Bugzilla: https://www.khronos.org/bugzilla/show_bug.cgi?id=1405
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d54a70aa18)
