pipe_sampler_view already contains a texture, remove the redundant
tex_resource member which pointed at the same thing.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Since NIR f/e currently encodes immediates in instructions (rather than
passing via const), we need to ensure that when const's are used the get
initialized to the proper values. Otherwise comparing NIR to TGSI
compiler, it will use proper immediate values in one case, and randomly
initialize values in the other. Which confuses ir3test.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Be smarter about propagating copies from const or immed, or with abs/neg
modifiers. Also, realize that absneg.s and absneg.f are really "fancy"
mov instructions.
This opens up the possibility to remove more copies. It helps the TGSI
frontend a bit, but will be really needed for the NIR f/e which builds
everything up in SSA form (ie. will *always* insert a mov from const or
immediate).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Even though in the end, they map to the same bits, the backend will need
to be able to differentiate float abs/neg vs integer abs/neg. Rather
than making the backend figure it out based on instruction opcode (which
when combined with mov/absneg instructions, can be awkward), just split
out different flags for each so the frontend can signal it's intentions
more clearly. Also, since (neg) for bitwise op's is actually a bitwise-
not, split it out into bnot flag.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add helpers for constructing SSA forms of instructions.
Only partial cat5/cat6 coverage.. but we can add stuff as needed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to pull in libnir.la and it's dependency libglsl_util.la. Also,
_mesa_error_no_memory() must be defined.
Fortunately with libnir.la (vs pulling in all of libglsl.la) we don't
also need libstdc++.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
If we want to use NIR from state trackers that don't already pull in the
whole of glsl (ie. anything other than mesa state tracker), we need a
separate more minimal libnir. Possibly NIR should be better split out
from glsl, but for now, generate a second smaller libnir.la for those
who just want NIR but not all of glsl.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Based on the algo from NV50LegalizeSSA::handleDIV() and handleMOD().
See also trans_idiv() in freedreno/ir3/ir3_compiler.c (which was an
adaptation of the nv50 code from Ilia Mirkin).
A python/numpy script which implements the same algorithm (and is
possibly useful for debugging or analysis) can be found here:
http://people.freedesktop.org/~robclark/div-lowering.py
I've tested this on i965 hacked up to insert the idiv lowering pass,
and on freedreno with NIR frontend.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Eric Anholt <eric@anholt.net> (vc4)
v2: discovered that i2b/b2i are also confused
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
In freedreno these get implemented as the matching f* instruction plus a
u2f to convert the result to float 1.0/0.0. But less lines of code to
just let nir_opt_algebraic handle this for us, plus opens up some small
window for other opt passes to improve (ie. if some shader ended up with
both a flt and slt with same src args, for example).
v2: use b2f rather than u2f
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Switch between the two clip space definitions already available
in hardware. Update winding order dependent state according
to the clip control state.
This change did not introduce new piglit quick.test regressions on
an Ivybridge Mobile and a GM45 Express chipset.
Also it enables and passes the clip-control and clip-control-depth-precision
tests on these two chipsets.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
The _WindowMap can be dropped from gl_viewport_attrib now.
Simplify gl_viewport_attrib handling where possible.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
This is the only real user of _WindowMap which has the depth
buffer scaling multiplied in. Maintain the _WindowMap of the
one and only viewport inside TNLcontext.
v2:
Remove unneeded parentheses.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Instead of _WindowMap just use the translation and scale
of the viewport transform directly. Thereby avoid dividing by
_DepthMaxF again.
v2:
Change order of assignments.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Instead of _WindowMap just use the translation and scale
of the viewport transform directly. Thereby avoid dividing by
_DepthMaxF again.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Commit 1a170980a0 started writing to q->data[4]/[5] but kept the
per-query space at 16, which meant that in some cases we would write
past the end of the buffer. Rotate by 32, like nvc0 does. This ensures
that we always have 32 bytes in front of us, and the data writes will go
within the allocated space.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89679
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Nick Tenney <nick.tenney@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
As of da5ec2a, we allocate instruction sources out of the instruction
itself. When we realloc the texture sources we need to use the right
memory context or ralloc will get angry and assert-fail
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds a pass to L1-normalize cube-map coordinates. Some hardware
such as i965 requires that largest cube-map coordinate is +-1. We had a
pass to perform this normalization in GLSL IR but we need it in NIR for
cube maps on ARB programs to work correctly.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2 (Suggested by Eric):
- Do a vector fabs and split into components later
- Move to core NIR
Reviewed-by: Eric Anholt <eric@anholt.net>
This only impacts the ARB_fp path. We can't quite disable the GLSL-level
lowering pass, because it needs to apply before
brw_do_lower_unnormalized_offset().
total instructions in shared programs: 5667857 -> 5667847 (-0.00%)
instructions in affected programs: 1114 -> 1104 (-0.90%)
helped: 16
HURT: 6
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Not much hardware wants them these days, and it might give us a chance to
do CSE or algebraic at the NIR level.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
We use nir_ssa_defs for nir_builder args, so this takes a nir_src and
makes one so it can be passed in.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
So far we'd only used nir_builder to build brand new programs. But if
we're doing modifications to instructions (like in a lowering pass), then
we want to generate new stuff before the instruction we're modifying.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The fpclassify stuff either needs std=c99 or _XOPEN_SOURCE=600 passed
to gcc, but when using the latter the lrint family of function will be defined
too.
This is in preparation for these functions to be called from other
files.
This commit is intended to have no functional change. It exists in
preparation for some upcoming code movement in preparation for the
shader cache.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The dirty-bit checking from each brw_upload_<stage>_prog function is
split out into its a new brw_<stage>_state_dirty function.
This commit is intended to have no functional change. It exists in
preparation for some upcoming code movement in preparation for the
shader cache.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit splits portions of the existing brw_upload_vs_prog and
brw_upload_gs_prog function into new brw_vs_populate_key and
brw_gs_populate_key functions. This follows the same style as is
already present for all other stages, (see brw_wm_populate_key, etc.).
This commit is intended to have no functional change. It exists in
preparation for some upcoming code movement in preparation for the
shader cache.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit 09ee907266 added logic to fold immediates into mad operations,
but the emission code is only there for fmad. Only allow it on float
types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Commit fb63df2215 added 4-byte mad support, but only supported
emission for floats. Disable it for ints for now.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The lifetime of the sources array needs to be match the nir_tex_instr
itself. So, allocate it using the instruction itself as the context.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
These sets are part of the block, and their lifetime needs to match the
block itself. So, allocate them using the block itself as the context.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The lifetime of each register's use/def/if_use sets needs to match the
register itself. So, allocate them using the register itself as the
context.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
glsl_to_nir passes in the ir_function's name field; we were copying the
pointer, but not duplicating the memory.
We want to be able to free the linked GLSL IR program after translating
to NIR, so we'll need to create a copy of the function name that the NIR
shader actually owns.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
We can just pass a pointer to the list of variables, and reuse the code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
ralloc_adopt() reparents all children from one context to another.
Conceptually, ralloc_adopt(new_ctx, old_ctx) behaves like this
pseudocode:
foreach child of old_ctx:
ralloc_steal(new_ctx, child)
However, ralloc provides no way to iterate over a memory context's
children, and ralloc_adopt does this task more efficiently anyway.
One potential use of this is to implement a memory-sweeper pass: first,
steal all of a context's memory to a temporary context. Then, walk over
anything that should be kept, and ralloc_steal it back to the original
context. Finally, free the temporary context. This works when the
context is something that can't be freed (i.e. an important structure).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
